• Korean Chemical Engineering Research
• /
• 제44권4호
• /
• pp.340-344
• /
• 2006

폴리스티렌을 acetyl sulfate 시약을 사용하여 술폰화시킨 후 다공성 양이온교환 막으로 제조하였다. 제조된 막의 특성을 분석한 결과 다공성의 형태를 가졌음을 확인할 수 있었고, IR 분석결과 술폰산기의 도입을 확인할 수 있었다. 전체적으로 반응물 중 황산의 양이 증가할수록 이온교환능력이 증가하는 경향을 확인할 수 있었고, 전기투석 공정에 적용가능성을 판단한 결과 양이온에 대한 선택성과 음이온에 대한 배제성을 간접적으로 확인할 수 있었다.

• 한국의학물리학회지:의학물리
• /
• 제28권4호
• /
• pp.135-143
• /
• 2017

Chemical Exchange Saturation Transfer (CEST) imaging is a method to detect solutes based on the chemical exchange of mobile protons with water. The solute protons exchange with three different patterns, which are fast, slow, and intermediate rates. The CEST contrast can be obtained from the exchangeable protons, which are hydroxyl protons, amine protons, and amide protons. The CEST MR imaging is useful to evaluate tumors, strokes, and other diseases. The purpose of this study is to review the mathematical model for CEST imaging and for measurement of the chemical exchange rate, and to measure the chemical exchange rate using a 3T MRI system on several amino acids. We reviewed the mathematical models for the proton exchange. Several physical models are proposed to demonstrate a two-pool, three-pool, and four-pool models. The CEST signals are also evaluated by taking account of the exchange rate, pH and the saturation efficiency. Although researchers have used most commonly in the calculation of CEST asymmetry, a quantitative analysis is also developed by using Lorentzian fitting. The chemical exchange rate was measured in the phantoms made of asparagine (Asn), glutamate (Glu), ${\gamma}-aminobutyric$ acid (GABA), glycine (Gly), and myoinositol (MI). The experiment was performed at a 3T human MRI system with three different acidity conditions (pH 5.6, 6.2, and 7.4) at a concentration of 50 mM. To identify the chemical exchange rate, the "lsqcurvefit" built-in function in MATLAB was used to fit the pseudo-first exchange rate model. The pseudo-first exchange rate of Asn and Gly was increased with decreasing acidity. In the case of GABA, the largest result was observed at pH 6.2. For Glu, the results at pH 5.6 and 6.2 did not show a significant difference, and the results at pH 7.4 were almost zero. For MI, there was no significant difference at pH 5.6 or 7.4, however, the results at pH 6.2 were smaller than at the other pH values. For the experiment at 3T, we were only able to apply 1 s as the maximum saturation duration due to the limitations of the MRI system. The measurement of the chemical exchange rate was limited in a clinical 3T MRI system because of a hardware limitation.

• 한국표면공학회지
• /
• 제55권6호
• /
• pp.319-327
• /
• 2022

Ion exchange membranes have been developed from laboratory tools to industrial products with significant technical and trade impacts in the last 70 years. Today, ion exchange membranes are successfully applied for water and energy for different electro-membrane processes. Hydrogen could be produced by electrochemical water splitting using renewable energy, for example, solar, biomass, geothermal and wind energy. This review briefly summarizes the recent studies reporting the state-of-the-art anion-exchange membrane water electrolysis, especially focusing on the enhancement of the durability of anion-exchange membranes. Anion-exchange membrane water electrolysis could be used as inexpensive non-noble metal electrocatalysts that are capable of producing low cost of hydrogen. However, the main challenge of anion-exchange membrane water electrolysis is to increase the performance and durability. In this mini review, the limiting factors of the durability and the technology enhancing the durability will be discussed for anion exchange membrane water electrolysis.

• Bulletin of the Korean Chemical Society
• /
• 제7권2호
• /
• pp.124-129
• /
• 1986

The effects of molecular attraction and orientations for the energy mismatch variance, vibrational energy level and double-quantum transition, in the vibration-vibration energy exchange, have been considered. The contribution of molecular attraction increases the exchange rate of the purely repulsive interaction, in general, significantly, but which becomes smaller as the temperature is increased. As the energy mismatch is increased, its contribution is also increased, but which is small. However, its contribution for the double-quantum transition is very paramount. At each orientation, the exchange rate constants have been calculated and compared with the results for rotational average, and it is found that the exchange rate is a strong function of the orientation angles of colliding molecules. We have also discussed about the system having the strong interaction such as the hydrogen bond, and it is found that for this system the preferred orientation should be considered in order to calculate the exchange rates.

• 품질경영학회지
• /
• 제43권3호
• /
• pp.359-372
• /
• 2015

Purpose: Through studying the expert's and non-experts panel responses to the questions regarding the attributes of chemical-biological protection cloth quality in terms of the levels of customer demand and technical factors has been studied. We are applied to a QFD matrix with find out the relationship between the selective removal efficiency of chemical-biological cloth and the guidelines of technical approach. Methods: We fabricated several composite of ion-exchange resins with selectively permeable performance designed to facilities water vapor transport and selective adsorption of the harmful gases. With these materials, we characterized on the selectively permeable performance to identify ion-exchange resin with chemical-biological protective cloth. Results: Results showed that ion exchange materials possessed performance with selectively efficiencies as NH3, SOx, NOx and HCl gas. The selective adsorption amount of ammonia and hydrogen gases were $90-80{\mu}g/g$ with TRILITE SCR-BH sulfonated ion exchange resin. The PP non-woven/ion exchange resin adsorbent materials possessed performance with water vapor permeability were 1,100-1,350 g/m2/day, it's was two times high value compare with activated carbon. With these materials, we characterized selectively removal efficiency to identify new ion-exchange material with chemical-biological protective capability. Conclusion: This study shows that a QFD aids in deciding with of the adsorption parameters to optimized with chemical-biological protection cloth manufacturing.

• Korean Chemical Engineering Research
• /
• 제56권3호
• /
• pp.361-369
• /
• 2018

A manufacturing method has been devised to prepare novel heterogeneous cation exchange membranes by mixing ethylene vinyl acetate (EVA) copolymers with a commercial cation exchange resin. Optimum material characteristics, mixture ratios and manufacturing conditions have been worked out for achieving favorable membrane performance. Ion exchange capacity, electrical resistance, water uptake, swelling ratio and tensile strength properties were measured. SEM analysis was used to monitor morphology. Effects of vinyl acetate (VA) content, melt index (MI) and ion exchange resin content on properties of heterogeneous cation exchange membranes have been discussed. An application test was carried out by mounting a selected membrane in a membrane capacitive deionization (MCDI) system to investigate its desalination capability. 0.92 meq/g of ion exchange capacity, $8.7{\Omega}.cm^2$ of electrical resistance, $40kgf/cm^2$ of tensile strength, 19% of swelling ratio, 42% of water uptake, and 56.4% salt removal rate were achieved at best. VA content plays a leading role on the extent of physical properties and performance; however, MI is important for having uniform distribution of resin grains and achieving better ionic conductivity. Overall, manufacturing cost has been suppressed to 5-10% of that of homogeneous ion exchange membranes.

• 공업화학
• /
• 제28권5호
• /
• pp.539-546
• /
• 2017

본 연구는 산성유해가스 제거를 위한 고효율 음이온교환 복합 폼 화학필터를 제조하기 위하여 폴리우레탄(PU) foam에 다른 종류의 PSA를 사용하여 상용이온교환수지를 부착하여 제조, 이의 내수성, 내화학성, 접착신율, 농도와 유속에 따른 HCl과 HF의 흡착특성에 관하여 연구하였다. 그 결과 접착신율은 ATE-701은 900%, AT-4000C는 1,500%, HCA-1000는 2,400%이며, 내수성 및 내화학성평가에서 HCA-1000의 탈리율이 6% 미만으로 우수한 내구성을 가짐을 확인하였다. HCl, HF의 농도와 유속이 증가함에 따라 흡착이 빠르게 일어났으며 유속과 농도에 관계없이 110 min 이후 100% 흡착파과평형이 일어남을 확인할 수 있었다. 또한 SEM Morphology 관찰 결과 점착제가 고르게 분산되어 있고 이온교환수지의 다공구조가 유지되었으며, 흡-탈착 공정에서 성능저하가 없는 것으로 보아 내구성이 있음을 확인하였다.

• 대한화학회지
• /
• 제11권2호
• /
• pp.56-59
• /
• 1967

Ligand Exchange를 원리로 하여 Nickel Ion을 포함하고 있는 Chelating Resin인 dowex A-1을 써서 Elution Chromatography에 의하여 Amine의 혼합물을 분리하는 방법을 기술하였다. 이 실험에서 암모니아 수용액을 Eluent로 썼다. 이 방법은 특히 방향족아민의 분리에 효과 있음을 알게 되었다.

• 대한화학회지
• /
• 제3권1호
• /
• pp.18-22
• /
• 1954

The cation exchange resins are synthesized from p-phenolsulfonic acid, formalin, and sodium hydroxide catalyser, and the ion exchange properties of them are studied with respect to their reactant ratios. Maximum exchange capacity was 2.06 me/G, much smaller than the theoretical value of 3.42 me/G to be expected for that of the structure: Under the present experimental conditions, much -SO3H radical should have been split away.

• Membrane and Water Treatment
• /
• 제14권2호
• /
• pp.55-63
• /
• 2023

In this study, the influence of different IEMs (ion exchange membranes) to performance of the hypochlorite electrolysis unit with Cl₂ recovery stream was investigated. More specifically, Nafion 117-a representative cation exchange membrane (CEM)-and aminated polypheylene oxide (APPO)-an anion exchange membrane (AEM)-were installed in the hypochlorite electrolysis unit, and the performance and the energy efficiency of the units were evaluated and compared. Regardless of whether CEM (Nafion 117) or AEM (APPO) was installed, the rate of hypochlorite generation was increased (by up to 24.3% and 22.2% for Nafion 117 and APPO, respectively) compared with the unit without an IEM. On the other hand, the power efficiency and the optimum operation condition of hypochlorite production units seem to depend on the conductivity and stability of the installed IEM. As the result, between Nafion 117 and APPO, higher performance and efficiency were achieved with Nafion 117, due to excellent conductivity and stability of the membrane.