• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.804-815
• /
• 2019

Due to the depletion and environmental problems of fossil fuel, biomass has arisen as an alternative energy source. Biomass is a renewable and carbon-neutral source. However, it is moister and has lower energy density. Therefore, biomass needs thermal chemical conversion processes like gasification, and it does not only produce a flammable gas, called 'syngas', which consists of CO, H2, and CH4, but also some unwanted byproducts such as tars and some particulates. These contaminants are condensed and foul in pipelines, combustion chamber and turbine, causing a deterioration in efficiency. Thus this work attempted to find a method to remove tars and particles from syngas with a filter which adopts a pre-coating technology for preventing blockage of the filter medium. Hydrated limestone powder and activated carbon(wood char) powder were used as the pre-coat materials. The removal efficiency of the tars was 86 % and 80 % with activated carbon(wood char) coating and hydrated limestone coating, respectively.

• Journal of Conservation Science
• /
• v.30 no.1
• /
• pp.95-101
• /
• 2014

Silver objects tarnish with black from reaction with sulfurous acid or hydrogen sulfide of atmospheric. Blackening of silver objects results from formation of silver sulfide($Ag_2O$) on the surface. Silver sulfide usually is usually removed by conservation treatment. There are several cleaning methods such as chemical, electrochemical and micro-abrasion cleaning, but all of them consume silver. This study investigated the safe and effective parameter of laser cleaning by test on silver coupons. Laser cleaning is a selective process for the removal of specific substances. At first, laser cleaning applied to plain silver coupons, which were not corroded, to find out the safe range of laser energy density. From results, plain silver coupons were not changed at 1064nm below $4.00J/cm^2$ and at 532nm below $2.39J/cm^2$. The corrosion layer(silver sulfide) of artifical corroded silver coupons was removed at 1064nm with $2.39J/cm^2$ by 5~10 pulses and at 532nm with $1.19J/cm^2$ by 5~10 pulses. The removal thickness of corrosion layer was about 13-25nm per a laser pulse using AES analysis. In addition, laser cleaning tested the tarnish silver rings based on the results of silver coupons. As a result of test, the black surface were clean successfully and gave luster of silver, which showed the application possibility of laser cleaning for silver objects.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.562-571
• /
• 2014

In these days, many countries carry out many renewable energy policies to increase the renewable energy portion and to reduce the GHG(Green House Gas). In Korea, RPS(Renewable Portfolio Standards) focused on over 500MW power producers is conducting. And they are using the bio-fuel oil to meet their RPS quota. The oil is a mixture of animal and vegetable fat or fatty acid ester of them and should satisfy some specifications to use the power generation such as viscosity, pour point, acid number. Depends on the raw materials, quality characteristics of power bio-fuel oil are changed. By adding the power bio-fuel oil, pour point, density, sulfur content and viscosity are decreased and acid number, iodine number, oxygen content are increased. In this study, we test the quality characteristic of power bio-fuel oil and the property changes by the blending ratio of power bio-fuel oil & conventional fuel oil.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.12
• /
• pp.943-952
• /
• 2013

Algae blooms have soared recently in the lakes across the nation due to eutrophication. Blue-green algae cause unpleasant scene, produce taste and odor problem, and hinder processes in drinking water treatment. Algae toxicity monitoring has been strengthened, because the damages of wild lives and livestocks by algal toxins have been reported. Investigation on the characteristics of cyanobacterial occurrence and concentration distribution of Cyanotoxins in Hoeya reservoir have been conducted. Physical and chemical influences of water environment on cyanobacterial occurrences have also been studied. Movements of four species of Microcystin and five species of Anatoxin-a among Cyanotoxins were observed by LC-MS/MS analysis. Microcystis spp. among the cyanobacteria have mainly dominated in the Hoeya reservoir during the investigating period. The density of cyanobacteria were positively correlated with temperature and pH of water. Highest concentrations of Microcystin-LR and Microcystin-RR were $0.424{\mu}g/L$ and $0.117{\mu}g/L$ at the sampling points. Total concentration of Cyanotoxins in water coming into the water treatment plant was $0.182{\mu}g/L$, and they were not detected in treated water.

• Korean Journal of Environmental Biology
• /
• v.38 no.1
• /
• pp.189-196
• /
• 2020

Mosquitos serve as vectors for diseases, causing inconvenience as well as a threat to human life and health. Concern about mosquitos introducing and spreading new diseases has been intensifying. We observed a variety of mosquito habitats based on land cover classification from Korea's Ministry of Environment, and the mosquito species that could appear were classified according to the each habitat type. Finally, we suggested the best control methods for each type of habitat considering habitat characteristics and the ecological traits of mosquitos. Urban areas harbor various habitats for pests, contributing significantly to mosquito habitats. Control must be performed regarding larva and adults because various sources for habitats exist. Public mosquito control programs such as educational training, as well as information brochures can be effective in managing mosquito populations and public health. Agricultural areas show high densities of mosquito larva to lentic zones such as reservoirs, wetlands, paddy fields. So, biological control using natural predators may be effective in controlling mosquito populations. Forests are major habitats for Aedes albopctus, so physical controls should be deployed for residents living nearby, and excessive deforestation should be minimized. Other areas including aquatic ecosystems should be adopted regarding biological control using Bti (Bacillus thuringiensis var. israelensis) and chemical control for eradicating mosquitos. We classified habitats into four types of land cover patterns considering ecological traits and habitat preference, and suggest adequate control methods for each habitat type. Our suggestion can be used to positively contribute toward effective managing mosquito's density and reducing the damage to public health.

• Journal of the Korean Vacuum Society
• /
• v.11 no.3
• /
• pp.176-182
• /
• 2002

Amorphous $TiO_2$ thin films were deposited on glass substrates by ion beam sputtering in which the ratio of $O_2$/Ar gas used as discharged gas was varied from 0 to 2. After optical and microstructure properties and chemical composition of thin films was analyzed, antireflection coating layers were fabricated with $SiO_2$/$TiO_2$ multi-layers. Thin films deposition was performed at room temperature and ion beam voltage and ion current density for sputtering of target were fixed at 1.2 kV and 200 $\mu\textrm{A}/\textrm{cm}^2$, respectively. Refractive indexs of the deposited $TiO_2$films were 2.40-2.45 at a wavelength of 633 nm. $TiO_2$films had high transmission and stoichiometry when ratio of $O_2$/Ar was 1. Rms roughness of deposited $TiO_2$ film was below 7 $\AA$. In excessive $O_2$ environments, however Rms roughness increased over 50 $\AA$. Transmittance decreased by scattering of rough surface. Reflectance of $SiO_2$/$TiO_2$multi-layers was below 1% in visible light.

• Journal of the Korean Vacuum Society
• /
• v.13 no.3
• /
• pp.114-119
• /
• 2004

Silicon Nitride thin films were deposited on p-type Si (100) substrates by atomic layer deposition (ALD) method at $550^{\circ}C$ using alternating exposures of $SiH_2Cl_2$ and $NH_3$, and the physical and electrical propeties of the deposited films were characterized. The thickness of the films was linearly increased with the number of deposition cycles, and the growth rate of the films was 0.13 nm/cycle with the reactant exposures of $3.0\times10^{9}$ L. The silicon nitride thin films deposited by Alf exhibited similar physical properties with the silicon nitride thin films deposited by low-pressure chemical vapor deposition (LPCVD) method in terms of refractive index and wet etch rate, lowering deposition temperature by more than 200 $^{\circ}C$. The ALD films showed the leakage current density of 0.79 nA/$\textrm{cm}^2$ at 3 MV/cm, which is lower than 6.95 nA/$\textrm{cm}^2$ of the LPCVD films under the same condition.

• Journal of the Korean Vacuum Society
• /
• v.2 no.2
• /
• pp.188-198
• /
• 1993

We have developed a technique for growing thin oxides (6~10 nm) by the Last step TCA method. N-channel metal-oxide-semiconductor (n-MOS) capacitor and n-channel metal-oxide-semiconductor field-effect transistor's (MOSFET's) having a gate oxide with chlorine incorporated $SiO_2/Si$ interface have been analyzed by electrical measurements and physical methods, such as secondary ion mass spectrometry (SIMS) and electron spectroscopy for chemical analysis (ESCA). The gate oxide grown with the Last strp TCA method has good characteristics as follows: the electron mobility of the MOSFET's with the Last step TCA method was increased by about 7% and the defect density at the $SiO_2/Si$ interface decreases slightly compared with that with No TCA method. In reliability estimation, the breakdown field was 18 MV/cm, 0.6 MV/cm higher than that of the gate oxide with No TCA method, and the lifetime estimated by TDDB measurement was longer than 20 years. The device lifetime estimated from hot-carrier reliability was proven to be enhanced. As the results, the gate oxide having a $SiO_2/Si$ interface incorporated with chlorine has good characteristics. Our new technique of Last step TCA method may be used to improve the endurance and retention of MOSFET's and to alleviate the degradation of thin oxides in short-channel MOS devices.

• Applied Chemistry for Engineering
• /
• v.25 no.2
• /
• pp.181-187
• /
• 2014

In order to use the spherical atomizing reduction steel slag (ladle furnace slag, LFS) instead of the fine aggregate of polymer concrete composites, various specimens were prepared with various replacement ratios of atomizing reduction steel slag and the addition ratios of polymer binder. Physical properties of these specimens were investigated through the absorption test, the compressive strength test, the flexural strength test, the hot water resistance test, the pore analysis and the micro-structure using scanning electron microscope. Results showed that the compressive strength and flexural strength of specimens with 7.5% of polymer binders increased with the increase of replacement ratios of atomizing reduction steel slag, but those of the specimens with 8.0% or more of polymer binders showed a maximum strength at a certain replacement ratio due to the material segregation causing the increase of fluidity. By hot water resistance tests, the compressive strength, flexural strength, average pore diameter, and bulk density decreased but the total pore volume and pore diameter increased. It was concluded that the amount of polymer binders could be reduced by maximum 23.8%, because the workability of the polymer concrete was remarkably improved by using the atomizing reduction steel slag instead of fine aggregate. However, since the use of atomizing reduction steel slag decreased the resistance of the polymer concrete to hot water, further studies are required.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1140-1145
• /
• 1998

Low density polyethylene (LDPE) films incorporated with 1% antimicrobial agents of Rheum palmatum extract, Coptis chinensis extract, and Ag-substituted inorganic zirconium matrix, were applied to modified atmosphere packaging of 200 g fresh strawberries. Plain LDPE film package, PVC wrap and perforative pinhole package of the film impregnated with 1% Rheum palmatum extract were also constructed for comparative purpose. All the packages were stored for 13 days at $5^{\circ}C$ and measured in package atmosphere, microbial count and quality attributes of the strawberry fruits. The antimicrobial LDPE films retarded the growth in total aerobic bacteria, lactic acid bacteria and yeast on the fruits, and resulted in significantly lower decay. The degrees of reduced microbial growth and fruit decay in the antimicrobial film packages were more pronounced, when applied by hermetical sealing to produce the modified atmospheres of low $O_2$ (<4.0%) and $CO_2$ concentrations with $6.3{\sim}9.0%$. The hermetically sealed packages of antimicrobial LDPE films also showed better retention of fruit firmness and did not give any negative effect on the physical and chemical qualities of strawberries.