• 제목/요약/키워드: Chemical compositions

검색결과 1,817건 처리시간 0.026초

Measurement and Estimation of VOC Composition from Gasoline Evaporation

  • Na, K.;Moon, K.-C.;Kim, Y.P.
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제17권E3호
    • /
    • pp.101-107
    • /
    • 2001
  • Source profiles were developed for a total of 45 volatile organic compounds (VOC) that can be emitted from gasoline evaporation. The gasoline samples of five major brands (for each season) were blended on the basis of the market share in Seoul area and analyzed by a GC-MS/FID system. In addition, we calculated gasoline evaporative compositions using the Raoult's law from the liquid gasoline compositions. The measured and estimated gasoline vapor compositions agree well each other. As a group, alkanes are the most abundant in the gasoline vapors profiles (77.4% on average), followed by alkenes (19.1%), and aromatics (1.7%). As a specie in gasoline vapor, i-pentane is the most abundant, followed by n-butane, n-pentane, i-butane, trans-and cis-2-butenes, 2-methyl-2-butene, and trans-and cis-2-pentenes . It was also seen that aromatic content was much lower in the vapor phase compositions. From the comparison between experimental and calculated compositions, we identified the fact that once the gasoline vapor composition is reliably constructed entirely from the measured gasoline composition and the Raoult's law calculations, the need for doing separate chemical analyses of the gasoline vapor can be reduced.

  • PDF

A Statistical Analysis on the Chemical Compositions & Mechanical Properties of Weathering Steels (내후성강재의 화학성분 및 기계적성질에 관한 통계적 분석)

  • Kyung, Kab Soo;Kwon, Soon Chul
    • Journal of Korean Society of Steel Construction
    • /
    • 제15권2호
    • /
    • pp.147-157
    • /
    • 2003
  • The application in steel structures is increasing the mill sheet for the weathering steels by minimum maintenance cost in a life cycle cost. These have been collected and statistically analyzed to investigate chemical compositions, mechanical properties, weldability indices, weathering index and impact absorbed energy. From this study, although the band of dispersion in chernical compositions, mechanical properties and impact absorbed energy of the weathering steels appeared a little larger, the results revealed that these values have adequately satisfied the standard values of the Korean Standard. Furthermore, it was found that the weldability indices and the weathering index for the weathering steels have respectively satisfied the value prescribed by the Japanese Highway Specification and ASTM.

Study on Combustion Characteristics of the Opposed Flames for Different Oxidant Compositions by Considering the Non-gray Radiation by the Gas Mixtures (비회색 혼합가스 복사를 고려한 산화제의 성분 변화에 따른 대향류화염의 연소 특성 연구)

  • Park, Won-Hee;Jo, Bum-Jin;Park, Jong-Hyuk;Kim, Tae-Kuk
    • Proceedings of the KSME Conference
    • /
    • 대한기계학회 2004년도 추계학술대회
    • /
    • pp.1341-1346
    • /
    • 2004
  • Detailed flame structures of the opposed flames formed for different oxidant compositions are studied numerically. The detailed chemical reactions are modeled by using the CHEMKIN code. Only the $CO_{2}$ and $H_{2}O$ are assumed to participate by absorbing the radiative energy while all other gases are assumed to be transparent. The discrete ordinates method and a narrow band based WSGGM with a gray gas regrouping technique are applied for modeling the radiative transfer through non-homogeneous and non-isothermal combustion gas mixtures generated by the opposed flow flames. The results show that the different radiation model can cause different results for flame structures and the WSGGM with gray gas regrouping is successful in modeling the opposed flames with non-gray gas mixture. The results also show that a reasonable information on the flame structure can be obtained from the modeling by considering different chemical compositions of the oxidant.

  • PDF

The Effect of Processing Parameters on HTS Tube Characteristics

  • Jung, Sengho;Jang, Guneik;Ha, Dongwoo;Sung, Taehyun
    • Transactions on Electrical and Electronic Materials
    • /
    • 제5권2호
    • /
    • pp.55-60
    • /
    • 2004
  • High-temperature Superconductor(HTS) tubes were fabricated in terms of different chemical compositions and various SrSO$_4$additions by centrifugal forming method. For powder melting by induction the optimum range of melting temperatures and preheating temperature were 1050$^{\circ}C$, 1100$^{\circ}C$ and 550$^{\circ}C$ for 30 min, respectively. The mould rotating speed was 1000 rpm. A tube was annealed at 840$^{\circ}C$ for 72 hours in oxygen atmosphere. The plates like grains more than 20 $\mu\textrm{m}$ were well developed along the rotating direction of mould regardless of initial chemical compositions and the amounts of SrSO$_4$in Bi2212. The specimen with Bi2212 composition exhibited T$\_$c/ of 83 K, while the specimens fabricated with other compositions are lower than 60 K. The measured I$\_$c/ and J$\_$c/ at 77 K(B = 0 T) in Bi2212 with 7 % SrSO$_4$ composition were about 680 A and 380 A/$\textrm{cm}^2$.

Properties of Nimonic 80A Alloy with Change in the Chemical Compositions and Heat Treatment Paths (화학조성 및 열처리경로 변화에 따른 Nimonic 80A 합금의 특성)

  • Choi Byong-Kang;Jeong Hae-Yong;Bae Cha-Hurn
    • Korean Journal of Materials Research
    • /
    • 제15권12호
    • /
    • pp.773-779
    • /
    • 2005
  • Properties of Ni-base superalloys of Nimonic 80A alloy system were investigated by the observation of microstructures, precipitates ana hardness as a function of the chemical compositions ana the paths of heat treatment. The higher hardness values showed, the higher Ti/Al ratio among high compositions of Cr and Co element. The lower (Ti+Al) and Fe contents decreased in the same Ti/Al ratio, the higher hardness values showed. This results are considered that coherent deformation was increased with increasing Ti/Al ratio. Hardness showed higher value when Cr contents was $18 wt\%$ less than $21wt\%Cr$. In $3.15 wt\%$Co alloy, $\gamma'$ phase was very fine as around 50nm and, its volume fraction and hardness showed the highest value by 2step-aging treatment.

Structural and Magnetic Properties of the Brownmillerite $Ca_2Al_xFe_{2-x}O_5$ System

  • 김귀야;로권선;여철현
    • Bulletin of the Korean Chemical Society
    • /
    • 제16권10호
    • /
    • pp.934-938
    • /
    • 1995
  • A series of solid solutions in the Ca2AlxFe2-xO5 (x=0.00, 0.50, 0.66, 1.00 and 1.34) system with brownmillerite structure has been synthesized at 1100 ℃ under an atmospheric air pressure. The solid solutions are analysed by powder x-ray diffraction analysis, Mohr salt titration, thermal analysis, and Mossbauer spectroscopic analysis. The x-ray diffraction analysis assigns the compositions of x=0.00 and 0.50 to the space group Pcmn and those of x=0.66, 1.00, and 1.34 to the Ibm2. Mo&ssbauer spectra have shown the coordination state and disordering of Al3+ and Fe3+ ions. The substituting preference of Al3+ ions for the tetrahedral site decreases with increasing x value. Magnetic susceptibility of the system has been measured in the temperature range of 5 K to 900 K. The solid solutions of the compositions of x=0.00, 0.50 and 0.66 have shown a thermal hysteresis and the thermoremanent magnetization gap decreases with increasing x value in the above systems. However the compositions of x=1.00 and 1.34 do not show the hysteresis. The exchange integral is calculated from Fe3+ ion occupancy ratio. The integral decreases with x value and thus the magnetic transition temperature decreases with the increasing x value.

Melt Rheology of Ethylene 1-Octene Copolymer Blends Synthesized by Ziegler-Natta and Metallocene Catalysts

  • Kim, Hak-Lim;Dipak Rana;Hanjin Kwag;Soonja Choe
    • Macromolecular Research
    • /
    • 제8권1호
    • /
    • pp.34-43
    • /
    • 2000
  • The melt rheology of four binary blends of ethylene 1-octene copolymers (EOCs) which consist of one component by Ziegler-Natta and another by metallocene catalysts, was studied to elucidate miscibility in the melt by using torsion rheometer at 200$\^{C}$ and different shear rates. The four blend systems, designated into the FA+FM, SF+FM, RF+EN, and RF+PL blend, are divided and interpreted based on the melt index (MI), the density and the comonomer contents. The melt viscosity such asη', η", and η$\^$*/ is weight average value if the comonomer contents are similar, otherwise they show different manner. The experimental resole are analyzed based on the Cole-Cole plot of logη' uersus log η", the logarithmic plots of the dynamic storage modulus (G') versus the dynamic loss modulus (G") for various blend compositions, and the melt viscosity of 11', n", and f" as a function of blend compositions. As a cerise-quence, the FA+FM blend is miscible, but the SF+FM, RF+EN, and RF+PL blends are not in the melt. Thus miscibility of the blends studied in this communication is suggested to strongly influence by the comonomer contents rather than the density or the MI.

  • PDF

Effects of steaming on saponin compositions and antiproliferative activity of Vietnamese ginseng

  • Le, Thi Hong Van;Lee, Seo Young;Lee, Gwang Jin;Nguyen, Ngoc Khoi;Park, Jeong Hill;Nguyen, Minh Duc
    • Journal of Ginseng Research
    • /
    • 제39권3호
    • /
    • pp.274-278
    • /
    • 2015
  • Background: Steaming of ginseng is known to change its chemical composition and biological activity. This study was carried out to investigate the effect of different steaming time-scales on chemical constituents and antiproliferative activity of Vietnamese ginseng (VG). Methods: VG was steamed at $105^{\circ}C$ for 2-20 h. Its saponin constituents and antiproliferative activity were studied. The similarity of chemical compositions between steamed samples at $105^{\circ}C$ and $120^{\circ}C$ were compared. Results: Most protopanaxadiol and protopanaxatriol ginsenosides lost the sugar moiety at the C-20 position with 10-14 h steaming at $105^{\circ}C$ and changed to their less polar analogues. However, ocotillol (OCT) ginsenosides were reasonably stable to steaming process. Antiproliferative activity against A549 lung cancer cells was increased on steaming and reached its plateau after 12 h steaming. Conclusion: Steaming VG at $105^{\circ}C$ showed a similar tendency of chemical degradation to the steaming VG at $120^{\circ}C$ except the slower rate of reaction. Its rate was about one-third of the steaming at $120^{\circ}C$.

Chemical Compositions of the Observed Precipitation in Forest Area on the Border of Highway(Shingal, Seochun) (고속도로변 산림지역(신갈, 서천) 강우의 화학적 조성)

  • 김영채;정동준;김홍률
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • 제4권4호
    • /
    • pp.237-247
    • /
    • 2002
  • Air pollution by acid pollutants is problematic in the whole world. Water acidification has already been deteriorating the forest ecosystem. This study was conducted to analyze the acidity and chemical composition of the open precipitation and throughfall at forests with various geographic locations in Korea. The results of this study are as follows; The open precipitation pH was lowest in Seochun. The throughfall pH showed some buffering capacity in only Quercus mongolica stands. In Pinus rigida(Shingal and Seochun) stands, there was little difference from the open precipitation. Chemical composition of the open precipitation for each sampling site showed that $Ca^{2+}$, N $H_{4}$$^{+}$ and S $O_{4}$$^{2-}$ concentrations had higher value than other ions, and except these ions, the small quantity of ions showed different properties to each site. Changes of ion concentrations in the throughfall showed a tendency to increase. ion concentrations of the throughfall increased with washout and nutrient leaching from the trees. In conclusion, the influence was extended to the pure zone, and the frequency of acid rain is increasing. But, if the deposition of pollutants exceeds the capacity of purification, it would damage forest ecosystem. Further investigations are necessary to identify tolerant tree species to acid pollutants.nts.