• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.2 no.2
• /
• pp.125-133
• /
• 2004

Fission products of DUPIC (Direct Use of Spent PWR Fuel in CANDU Reactors) fuel, irradiated in HANARO research reactor with 61 ㎾/m of maximum linear power and 1,770 ㎿d/tU of average burn-up, was characterized by EPMA(Electron Probe Micro Analyzer). In order to find accurate characterization, the analysis results by EPMA of fresh simulated DUPIC fuel containing fission products as chemicals were compared with that of wet chemical analysis. The metallic precipitates observed at the center of the fresh simulated DUPIC fuel were about 1 $\mu\textrm{m}$ in size and their major components by EPMA were Mo-53.89 at.%, Ru-37.40 at.%, and Pd+Rh-8.71 at.%. Established procedure through the fresh simulated DUPIC fuel was applied to the irradiated DUPIC fuel. Observed size of metallic precipitates were 2∼2.5 $\mu\textrm{m}$ and their compositions were Mo-47.34 at.%, Ru-46 at.%, and Pd+Rh-6.65 at.%. What are uncommon things for this experiment, special treatment for improving the conductivity was attempted to the specimen and the conditions of exact irradiation of electron beam to small metallic precipitate were suggested.

• Applied Biological Chemistry
• /
• v.41 no.1
• /
• pp.67-72
• /
• 1998

As a part of basic investigation for utilizing by-products derived from seafood processing as a food source, a chemical characteristics of fish bones (cod bone, Alaska pollack bone, yellowfin sole bone, hoki bone, conger eel bone and mackerel bone) were investigated. The crude protein (40.7% on the dry basis) and collagen contents (5.86%, on the dry basis), imino acid composition (189 residues/1,000 residues) of hoki bone were higher than those of the other fish bones, but were lower than those of the animal bone. The crude lipid contents and EPA and DHA compositions of yellowfin sole, conger eel and mackerel bones were $22.8{\sim}43.9%$ on the dry basis and $15.6{\sim}23.8%$, respectively and were lower than those of squid viscera. The major ash components of the fish bones were found to be calcium and phosphorus and the contents in 100 g crude ash were $37.1{\sim}38.6%$ and $18.0{\sim}18.5%$ respectively. The calcium and phosphorus contents in 100 g crude ash of cod and Alaska pollack bones were more than those of the animal bones, as well as the others. It may be concluded, front these results, hoki bone can be effectively utilized as a processing materal of collagen or gelatin and cod and Alaska pollack bones as a calcium source.

• Analytical Science and Technology
• /
• v.7 no.3
• /
• pp.315-320
• /
• 1994

Li-GICs as a high performance energy storager were synthesized as a function of the Li content by the admixture and add-pressure method. The characteristics of these prepared compounds have been determined from the studies by X-ray diffraction, UV-VIS spectrometry and CHN analysis. It follows from the results of X-ray diffraction that the lower-stage intercalation compounds are formed as the Li contents increase, however the mixed stages in these compounds are also observed. In the case of the $Li_{40wt%}$, the compound with the structure of stage 1 has been predominently, but the structure of only stage 1 is not obtained. The $d_{001}$ value of stage 1 was determined to be ca. $3.70{\AA}$. An analysis of spectrometric data shows that each of the compounds gives distingushible energy state spectra. It is seen from the spectra that the positions of $R_{min}$ values, with increase in the Li contents, are shifted in the region of higher energy state. Such a result can be attributed to the formation of stable stages. The results of CHN analysis allow us to find the mixing state related to chemical compositions of the intercalated compounds and the superiority to admixture and add-pressure method. From the results determined, it reveals that $Li_{10wt%}$-GIC and $Li_{20wt%}$-GIC can be utilized for an anode of rechargable battery.

• Analytical Science and Technology
• /
• v.24 no.2
• /
• pp.135-141
• /
• 2011

MMPs (Matrix metalloproteinases) are enzymes playing an important role to turnover and remodel main protein compositions of extracellular matrix. MMP-2 and MMP-9 of MMPs having a catalytic domain which is apart from a hemopexin-like domain part, are different from the other MMPs pertaining fibronectinlike domain close to hemopexin-like domain. It was reported that the development of MMP-9 restrainer can prevent the transfer of liver cancer. In this study, MMP-9 restrainers were extracted and purified from Hovenia dulcis Thunberg. The each fractionary part was examined to investigate the inhibitory effect on MMPs. Three compounds, compound A and B eluted with ethyl acetate (EA) and compound C with methanol, were identified by $^1H$ and $^{13}C$ NMR, GC/MS, and FT-IR. Compound A is considered as a kind of catechine type compound having a benzene ring substituted by hydroxyl and methoxyl groups. Compound B and C are nobiletin type compound pertaining a carbonyl group. Compound A, B and C showed 76%, 66% and 71% of inhibition effect on MMP-9 at 1.0% concentration, respectively. Compound A showed the best inhibition effect on MMP-9.

• The Korean Journal of Pesticide Science
• /
• v.20 no.1
• /
• pp.30-34
• /
• 2016

To evaluate the efficacy of natural nematicides for the control of root-knot nematode in strawberry greenhouses, commercial essential oils were examined by 24-well culture plate bioassay for their nematicidal activities against second-stage juveniles and eggs of Meloidogyne hapla. Based on the mortality of M. hapla juveniles at a concentration of $125{\mu}g/mL$, the most active essential oil was Alpinia galanga (100%), followed by Carum carbi (22.3%), Eugenia caryophyllata (9.4%), Cinnamonum zeylanicum (7.2%), Mentha pulegium (2.4%), and Foeniculum vulgare (2.1%). Moreover, A. galanga significantly reduced hatching at 7, 14, and 21 days after treatment. The volatile constituents identified in the A. galangal oil were methyl cinnamate (87.4%), 1,8-cineole (4.4%), ${\beta}$-pinene (2.5%), ${\alpha}$-pinene (2.2%), and p-cymene (1.1%), as major constituents. Results of this study show that A. galangal essential oil and its major constituents may serve as an environmental friendly agent of a promising natural nematicide to control Meloidogyne spp.

• Journal of Conservation Science
• /
• v.34 no.3
• /
• pp.179-193
• /
• 2018

This study is aimed to investigate the provenance of raw materials and firing temperature of jar coffins excavated from the Oryang-dong kiln site and Jeonchon tomb site, Naju, Korea. Most of jar coffin samples shows same range of magnetic susceptibility and have gray color, while 404 and 405 of Jeongchon site are reddish yellow. In some samples fired at high temperature, the water absorption at the mouth rim and body part of same jar coffin were 3.50% and 7.56% respectively. It means that heat transfer and equilibrium in the kiln was not properly continued and the heat energy transferred to the mouth rim and the body part was different. In the petrographic analysis, As a tempering materials, biotite, weathered quartz and feldspar were added in the jar coffins of Oryang-dong site, and biotite, polycrystalline quartz and feldspar in it of Jeongchon site. Tempering materials were found more in the body than in the mouth rim of same jar coffin of Oryang-dong site. It seemed that some samples were fired at over 1,000 to $1,100^{\circ}C$, which showed vitrified texture in the scanning electron images and the rest of samples were fired at below $900^{\circ}C$. Due to similarity of chemical compositions, it is estimated that jar coffins of Jeongchon tomb were produced and supplied from Oryang-dong kiln site. However, the slight difference of some trace elements distribution of samples is attributed to the selection of clay depending on the location.

• Applied Biological Chemistry
• /
• v.40 no.4
• /
• pp.313-317
• /
• 1997

To assess the physiochemical characteristics of greenhouse Satsuma mandarin (Citrus unshiu Marc. var, miyakawa) produced in Cheju, were analyzed chemical compositions for fruits, external and internal factors influencing the edible quality. Changes in organoleptic value according to brix and acid content were also evaluated. The ratios of sucrose : glucose : fructose in citrus juice were 2 : 2 : 1.5. Citric acid as the main acid in the juice represented about 70% of total organic acid. Most of the amino acids were found to be nonessential amino acids. Deep yellow color of the citrus peel showed a significant relationship(r=0.563) with brix/acid ratio of the citrus juice, indicating the ripeness of the fruit. Since the acid content showed highly negative statistical relationship(r= -0.882) with the pH value of the juice, the pH value appears to be a simple indicator for the sourness of the fruit in the field test. The fruits were divided into 9 groups based on the brix/acid contents for sensory evaluation. The palatability patterns of each group changed depending on the acid content. The optimal ranges of brix/acid content for acceptable taste were 11 and $0.5{\sim}1.0$, respectively.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.4
• /
• pp.280-287
• /
• 2015

The high time-resolution monitoring data are essential to estimate rapid changes in chemical compositions, concentrations, formation mechanisms, and likely sources of atmospheric particulate matter (PM). In this study, $PM_{2.5}$ sulfate, $PM_{2.5}$, $PM_{10}$, and the number concentration of size-resolved PMs were monitored in Fukuoka, Japan by good time-resolved methods during the springtime. The highest monthly average $PM_{2.5}$ sulfate was found in May ($8.85{\mu}g\;m^{-3}$), followed by April ($8.36{\mu}g\;m^{-3}$), March ($8.13{\mu}g\;m^{-3}$), and June ($7.22{\mu}g\;m^{-3}$). The cases exceed the Japanese central government's safety standard for $PM_{2.5}$ ($35{\mu}g\;m^{-3}$) reached 10.11% during four months campaign. The fraction of $PM_{2.5}$ sulfate to $PM_{2.5}$ varied from 12.05% to 68.11% with average value of 35.49% throughout the entire period of monitoring. This high proportion of sulfate in $PM_{2.5}$ is an obvious characteristic of the ambient $PM_{2.5}$ in Fukuoka during the springtime. However, the average fraction of $PM_{2.5}$ sulfate to $PM_{2.5}$ in three rain events occurred during our intensive campaign fell right down to 15.53%. Unusually high $PM_{2.5}$ sulfate (> $30{\mu}g\;m^{-3}$) marked on three days were probably affected by the air parcels coming from the Chinese continent, the natural sulfur in the remote marine atmosphere, and a large number of ships sailing on the nearby sea. The theoretical number concentration of $(NH_4)_2SO_4$ in $PM_{0.5-0.3}$ was originally calculated and then compared to $PM_{2.5}$ sulfate. A close resemblance between the diurnal variations of the theoretically calculated number concentration of $(NH_4)_2SO_4$ in $PM_{0.5-0.3}$ and $PM_{2.5}$ sulfate concentration indicates that the secondary formed $(NH_4)_2SO_4$ was the primary form of sulfate in $PM_{2.5}$ during our monitoring period.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.3
• /
• pp.346-356
• /
• 2008

Asbestos is the name of a group of minerals with long and thin fibers that originate naturally in the environment. Asbestos mainly affects lungs and the membrane that surrounds the lungs. In general, PCM (phase contrast microscopy) and PLM (polarized light microscopy) have been used to analyze asbestos fibers. However, these methods have often problems to over-estimate number concentration when counting real asbestos fibers. Moreover, there are many difficulties when separating and identifying various asbestos and non-asbestos fibers. In order to determine quantitative information on fibrous particles, source profiles for asbestos and non-asbestos fibers must be initially developed on the basis of their chemical compositions and physical parameters. In our study, a SEM/EDX was used to develop source profiles from known asbestos samples as reference samples. We could make the source profile matrix consisting of 6 types of asbestos fibers and 2 types of non-asbestos fibers by analyzing 380 fibers. Based on these profiles, a rule building expert system was developed by using the visual basic application (VBA). Various fibers were successfully classified by 2 simple rules in the EXCEL environment based on several visual steps such as inserting data, viewing results, and saving results. For a case study to test the expert system, samples from a construction materials and from various indoor environments such as a residental area, a preschool classroom, and an underground store were collected and analyzed. As a result of the survey, a total of 76 individual test fiber particles was well classified into 5 different types of particle classes; 9.3% of chrysotile, 15.4% of amosite, 0.8 of crocidolite, 4.2% of tremolite, 5.8% glass fiber, 21.1% of other fibers, and 43.5% of unknown fibers in terms of number concentration. Even though unknown portion was high, it will be decreased markedly when expanding fiber source profiles.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.69-76
• /
• 2018

This study examined the effect of the heat treatment and alloying elements (B, Ti) on the microstructures and mechanical properties of API J55 steel. The experiments were carried out using various austenization temperatures ($880^{\circ}C$, $910^{\circ}C$, $940^{\circ}C$), cooling methods (water quenching, oil quenching) and tempering temperatures (none, $550^{\circ}C$, $650^{\circ}C$) with J55 and J55+B,Ti steels. The phase diagram and CCT curve were simulated based on the chemical compositions of the J55 and J55+B,Ti steels to predict the microstructures. The results showed that the A1 and A3 temperatures decreased and, as a result, the noses of the ferrite and bainite parts of the CCT curve moved to the right. Various microstructures were formed, namely martensite, bainite, ferrite and pearlite, in accordance with the heat treatment, which had an effect on the hardness, tensile strength and toughness. Martensite was formed after water quenching, but bainite and ferrite appeared after oil quenching with the J55 specimens. On the other hand, martensite was formed, regardless of the cooling method (water quenching, oil quenching), with the J55+B,Ti specimens, because of the improvement of the hardenability caused by the addition of boron. Therefore, the J55+B,Ti specimens exhibited much higher mechanical properties than the J55 specimens, even after the tempering treatment, since the addition of Ti caused fine precipitates to be formed, which inhibited grain growth at the recrystallization temperature.