• Korean Chemical Engineering Research
• /
• 제50권3호
• /
• pp.588-593
• /
• 2012

불포화 폴리에스터(unsaturated polyester, UP)와 저수축제(low profile agent, LPA), 폴리스틸렌(polystyrene, PS)과의 compatibility가 불포화 폴리에스터와 저수축제의 비율, 혼합시간, 혼합온도 그리고 추가로 투입되는 불포화 폴리에스터 수지량과 같은 다양한 조건하에서 확인되었다. 1단계로 1700 rpm의 교반속도에서 제조된 수지 혼합액의 경우, 불포화 폴리에스터 수지(unsaturated polyester resin, UPR) 투입량 25 g, 약 $30^{\circ}C$의 반응온도에서 상대적으로 작은 입자 크기 및 상분리율을 나타내었다. 2단계 수지 혼합액의 경우, 2차로 투입된 45 g의 불포화 폴리에스터 수지 혼합액에서 향상된 compatibility를 보였다. 이러한 결과는 혼합조건이 불포화 폴리에스터 수지와 저수축제 혼합액의 compatibility에 중요한 역할을 한다는 것을 의미한다. 또한, 상기조건을 통해 제조된 sheet molding compound (SMC)를 사용해서 만든 샘플은 흡수율, 수축율 및 광택도에서 향상된 결과를 나타내었다.

• 대한화학회지
• /
• 제64권6호
• /
• pp.354-359
• /
• 2020

This research was conducted to analyze the compatibility of used monomers and produce the high functional contact lens material containing silicone monomers. Silicone monomer (Sil-OH), Trimethylsilylmethacrylate (TSMA) were used as additives for the basic combination of Polyhedral Oligomeric Silsesquioxane (POSS), methyl methacrylate (MMA) and methyl acrylate (MA). And also, the materials were copolymerized with ethylene glycol dimethacrylate (EGDMA) as the cross-linking agent, AIBN (thermal polymerization initiator) as the initiator. It is judged that the fabricated lenses of all combinations are optically excellent and thus used monomers have good compatibility. Measurement of the optical and physical characteristics of the manufactured hydrophilic lens material were varied in each case. Especially TSMA with POSS increases the oxygen permeability and Sil-OH with POSS increases the wettability by the addition of Sil-OH. These materials were considered to have compatibility each other, so it can be used in functional contact lens material.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.343-346
• /
• 2002

The chemical compatibility of leachate with the two natural materials was analyzed by performing the hydraulic conductivity test. The selected liner materials were natural marine clay and weathered soil sampled from Kimpo wastefill and Daehwa Dong, Kyonggi Do, respectively. PARAFIX, which is mainly composed of paraffin, cement, stearic acid, PVA etc., was used as solidifying agent. The chemical solutions used in the test were 10% acetic acid, 10% methanol, and real leachate from Kimpo wastefill and the results of tests were compared with that of distilled water. The results of tests show that hydraulic conductivity of solidified clay was increased slightly with permeation of acetic acid, methanol and the increase of hydraulic conductivity was not shown with permeation of leachate, distilled water and in case of weathered soil. Based on the tests, it is ascertained that the tested liner materials can be stable with the solution of low concentration.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 3차
• /
• pp.135-139
• /
• 2010

A construction technique to install the soil-bentonite (SB) cut-off wall for in-situ geoenvironmental containment by employing the trench cutting and re-mixing deep wall method is first presented in this paper. The laboratory test results on the hydraulic barrier performance of SB in relation to the chemical compatibility are then discussed. Hydraulic conductivity tests using flexible-wall permeameters as well as swell tests were conducted for SB specimens exposed to various types and concentrations of chemicals (calcium chloride, heavy fuel oil, ethanol, and/or seawater) in the permeant and/or in the pore water of original soil. For the SB specimens in which the pore water of original soil did not contain such chemicals and thus the sufficient bentonite hydration occurred, k values were not significantly increased even when permeated with the relatively aggressive chemical solutions such as 1.0 mol/L $CaCl_2$ or 50%-concentration ethanol solution. In contrast, the SB specimens containing $CaCl_2$ in the pore water had the higher k values. The excellent linear correlation between log k and swelling pressure implies that the swelling pressure can be a good indicator for the hydraulic barrier performance of the SB.

• 한국산학기술학회논문지
• /
• 제15권5호
• /
• pp.3351-3356
• /
• 2014

최근, 플라스틱 남용으로 인해 바이오매스 기반 물질에 대한 연구의 중요성이 증가하고 있는 추세이다. Cellulose acetate butyrate (CAB)는 생분해성의 성질 때문에 재생이 가능하여 잠재성을 가지고 있는 고분자이다. Poly(ethylene-co-isosorbide terephthalate) (PEIT)는 아이소소바이드 모노머로부터 유래된 바이오매스 기반의 고분자이다. 본 연구에서는 다양한 분야에 적용되고 있지만 열안정성이 낮은 CAB에 내열성이 높은 PEIT를 도입하여 용액 블렌딩 방법을 통해 CAB/PEIT 블렌드를 제조하였다. 블렌드의 상용성을 판단하기 위해 모폴로지와 유리전이온도의 거동을 FE-SEM, DMA를 사용하여 분석하였다. TGA 결과는 CAB/PEIT 75/50, 50/50 조성에서 향상된 열적 안정성을 나타내었으며 XRD에서 새로운 결정 구조는 관찰되지 않았다. 결과적으로 CAB/PEIT solution blends는 모든 조성에서 좋은 상용성을 가짐을 확인하였다.

• 한국지반공학회지:지반
• /
• 제13권2호
• /
• pp.9-16
• /
• 1997

본 논문은 오염지역 또는 폐기물 매립지의 오염 차단용으로 사용될 수 있는 연직차폐기술을 연구하였다. 이를 위하여 슬러리월 재료에 대한 투수 및 화학반응실험을 통하여 적절한 배합비를 갖은 흙-벤토나이트, 시멘트-벤토나이트, 시멘트l플라이애쉬-벤토나이트, 플라스틱 콘크리트 혼합재료를 제시하였다. 벤토나이트 슬러리의 침출수 반응성 실험결과, 화학물질의 영향에 의하여 벤토나이트 슬러리가 국부적으로 응집이 이루어지고, 슬러리 현탁액이 제대로 형성되지 않는 현상이 발생하였다. 뒤채움재의 투수시험 결과, 시멘트-벤토나이트. 플라스틱 콘크리트, 흙-벤토나이트 순으로 투수 계수가 작게 나타났으며, 침출수와의 반응실험결과, 투수성은 약간 증가하는 것으로 나타났으나 큰 영향은 없는 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3762-3766
• /
• 2013

This article examines the modification of surface properties of ultrahigh-molecular-weight polyethylene (UHMWPE) with nanoscale ceramic particles to fabricate an improved composite with butadiene-nitrile rubber (BNR). Adhesion force data showed that ceramic zeolite particles on the surface of UHMWPE modulated the surface state of the polymer and increased its compatibility with BNR. Atomic force microscopy phase images showed that UHMWPE made up the microphase around the zeolite particles and formed the evolving layer with a complex interface. The complex interface resulted in improvements in the mechanical properties of the composite, especially its low-temperature resistance coefficients, thereby improving its performance in low-temperature applications.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.140-143
• /
• 2004

Compatibility of polymeric materials governs their suitability for nearly all potential applications. An aspect of compatibility that is frequently important for fluoropolymers is their ability to isolate fluids by serving as a barrier to mass transport. This property is commonly expressed as permeability. In ideal cases, both solubility and diffusivity are constant at any given temperature and so the permeability is also a constant.(omitted)

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1989년도 춘계학술대회
• /
• pp.1-3
• /
• 1989

We have treated polymer surfaces such as polyethylene, polystyrene and polyester by various physicochemical and biological surface modification methods to be suitable for cell adhesion. The physicochemical methods we used were $O_2$ plasma discharge, corona discharge, sulfuric acid and chloric acid treatments. For the biological treatments, blood proteins such as plasma protein, serum protein and fibronectin were adsorbed onto the polymer surfaces. Chinese Hamster Ovary (CHO) cells were cultured on the surface-modified polymers and the cell-compatibility of those surfaces were compared. The chloric acid and fibronectin treatments were found to be the best methods of rendering the polymer surfaces adhesive for CHO cells.

• Carbon letters
• /
• 제11권2호
• /
• pp.83-89
• /
• 2010

We prepared polycarbonate (PC)/poly(methyl methacrylate) (PMMA)/multiwall carbon nanotube (MWCNT) nanocomposites by co-rotating twin screw extruder at 533 K. Thermal analysis results indicate that the miscibility of PC and PMMA is enhanced by MWCNTs. Bead necklace-like morphology of PMMA-rich phase is observed in PC/PMMA/MWCNT nanocomposites with increasing PMMA weight fraction due to the bead necklace-like morphology. The tensile strength of PC/PMMA (75/25)/MWCNT (1 wt.%) nanocomposite is 3% higher than those of PC/PMMA (75/25) alloy. Suppression of die swell by MWCNT filler is observed in the melt flow of PC/PMMA/MWCNT nanocomposites during extrusion.