• 지질공학
• /
• 제23권1호
• /
• pp.29-36
• /
• 2013

스크린 공막힘에 의하여 채수량이 감소된 지하수 관정은 여러 방법을 통하여 재생시켜주면 지하수 채수량을 개선시켜 관정의 수명을 연장할 수 있다. 본 논문에서는 화약이나 압축 유체를 사용하는 기존의 공막힘 재생기술을 대신할 수 있는 고전압 펄스 방전에 의한 지하수 관정 스크린 공막힘의 재생법에 대하여 연구하였다. 본 기술은 수중에 삽입된 전극에 순간적으로 고전압의 전기에너지를 주입하여 이 때 전극 사이에서 발생하는 고온, 고압의 플라즈마의 팽창력에 의하여 발생하는 수중 충격파를 이용하는 기술로, 기존 기술 대비 취급이 용이하며 구조가 간단하고 충격압의 크기 조절이 용이하다는 장점을 갖는다. 본 연구에서는 축전기 방전형 펄스 발생장치를 사용하여 약 200 J의 전기에너지를 수중에 삽입된 전극에 순간적으로 주입함으로써 전극으로부터 6 cm 떨어진 곳에서 약 10.7MPa의 수중 충격압을 얻었다. 이 충격압의 크기는 축전기의 충전 전압을 바꿔줌으로써 손쉽게 조절이 가능하였으며, 다양한 전압에서의 실험을 통하여 방전 전류의 첨두치와 선형적인 관계를 갖고 있음을 알았다. 또한 지하수 관정에 사용되는 스크린과 유사한 시료에 대한 모의실험을 통하여 이 기술을 이용한 지하수 관정의 세척 가능성을 확인하였다.

• 한국건설순환자원학회논문집
• /
• 제11권2호
• /
• pp.153-160
• /
• 2023

본 연구에서는 액상반응법을 이용하여 나노 크기의 C-S-H 결정을 합성하고 그 특성을 조사하였다. 합성한 C-S-H 결정을 현탁액 형태로 시멘트 복합체에 첨가하여 시멘트의 수화특성에 미치는 영향을 확인하였다. 최적 응집 형태의 나노 크기 C-S-H 결정을 도출하기 위해 화학혼화제의 양을 변수로 제조하였으며, SEM 사진 분석을 하였다. 합성된 C-S-H 결정외 유해물질을 제거하기 위해 세척 과정을 추가하였다. 세척과정을 거친 C-S-H 결정의 경우 유해물질의 농도가 낮아짐을 확인하였다. 합성된 C-S-H 현탁액은 세척 과정 유무에 따라 제조하였으며, 시멘트 중량대비 함유량을 주요 변수로 하여 시멘트 복합체를 제조하였다. 미소수화열 분석을 통해 C-S-H 결정이 시멘트의 초기 수화특성에 미치는 영향을 확인하였다. 또한, 모르타르 시험체를 제작하여 시간에 따른 압축강도를 측정하였다. 실험결과 나노 크기의 C-S-H 결정이 시멘트 페이스트 내에서 핵 생성처 역할을 하여 시멘트의 초기 수화를 촉진시키며, 초기 압축강도 또한 증가하는 것을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.61-69
• /
• 2000

Indium-Tin Oxide (ITO) films were prepared on the commercial glass substrate by the Magnetron Sputtering method. The target was a 90wt.% $In_2O_3$-10wt.% $SnO_2$with 99.99% purity. The ITO films deposited by changing the partial pressure of oxygen gas ($O_2$/(Ar+$O_2$)) of 2, 3 and 5% as well as by changing the substrate temperature of $300^{\circ}C$ or $500^{\circ}C$. The influence of substrate pre-annealing and pre-cleaning on the quality of ITO film were examined, in which the substrate temperature was $500^{\circ}C$ and oxygen partial pressure was 3%. The characteristics of films were examined by the 4-point probe, Hall effect measurement system, SEM, AFM, Spectrophotometer, and X-ray diffraction. The optimum ITO films have been obtained when the substrate temperature is $500^{\circ}C$ and oxygen partial pressure is 3%. At optimum condition, the film showed transmittance of 81%, sheet resistivity of $226\Omegatextrm{cm}^2$, resistivity($\rho$) of $5.4\times10^{-3}\Omega$cm, carrier concentration of $1.0\times10^{19}cm^{-3}$, and carrier mobility of $150textrm{cm}^2$Vsec. From XRD spectrum, c(222) plane was dominant in the case of substrate temperature at $300^{\circ}C$, without regarding to oxygen partial pressure. However, in the case of substrate temperature at $500^{\circ}C$, c(400) plane was grown together with c(222) plane, only for oxygen partial pressure of 2 and 3%. In both case of chemical and ultrasonic cleaning without pre-annealing the substrate, it showed much almost same sheet resistivity, resistivity($\rho$), transmittance, carrier concentration, and carrier mobility. In case of $500^{\circ}C$/60min pre-annealing before ITO film deposited, both transimittance and carrier mobility are better than no pre-annealing, because pre-annealing is supposed to remove alkari ions diffusion from substrate. ITO film deposited on the Corning 0080 sybstrate showed a little bit better sheet resistivity, resistivity($\rho$), transimittance, carrier concentration than the film deposited on commercial glass. But no differences between Corning substrate and pre-annealed commercial glass substrate are found.

• 상하수도학회지
• /
• 제37권5호
• /
• pp.271-279
• /
• 2023

Fouling is an inevitable problem in membrane water treatment plant. It can be measured by trans-membrane pressure (TMP) in the constant flux operation, and chemical cleaning is carried out when TMP reaches a critical value. An early fouilng alarm is defined as warning the critical TMP value appearance in advance. The alarming method was developed using one of machine learning algorithms, decision tree, and applied to a ceramic microfiltration (MF) pilot plant. First, the decision tree model that classifies the normal/abnormal state of the filtration cycle of the ceramic MF pilot plant was developed and it was then used to make the early fouling alarm method. The accuracy of the classification model was up to 96.2% and the time for the early warning was when abnormal cycles occurred three times in a row. The early fouling alram can expect reaching a limit TMP in advance (e.g., 15-174 hours). By adopting TMP increasing rate and backwash efficiency as machine learning variables, the model accuracy and the reliability of the early fouling alarm method were increased, respectively.

• 한국군사과학기술학회지
• /
• 제11권2호
• /
• pp.101-108
• /
• 2008

This study attempted to develop the technology by gaseous ozone for decontaminating building affected by a model of biological weapon agent(Bacillus subtilis spores) instead of Bacillus anthracis spore. The use of ozone is attractive method from a practical point of view of decontamination procedure since it has strong oxidation power but no residue after application. We examined the disinfection efficiency of gaseous ozone to Bacillus subtilis spores which suspension was sprayed on different material surfaces and dried. Three different types of gaseous ozone was applied : dry ozone, dry ozone with humidified air, and water bubbled wet ozone. Dry ozone(1500ppm) failed to achieve any significant inactivation for 2hrs. However, six log reduction of B. subtilis spore was achieved within 30min by 1500ppm of water bubbled wet ozone. This result shows the noticeable inactivation efficiency by gaseous ozone compared with previous studies. Good performance by wet ozone was also found for military material surface.(i.e. : gas mask hood, protective garments, army peinted metal surface).

• 환경위생공학
• /
• 제14권1호
• /
• pp.54-61
• /
• 1999

The industrial techniques of ultrasound have been used in the various fields, such as cleaning, medical surgery, emulsification, cell disruption etc. Especially the application of cell disruption was interested in the field of disinfection process in water by ultrasonic irradiation. It has been recognized that the ultrasounds are irradiated in aqueous solution, cavitation bubbles are generated and shock waves of high temperature and pressure are emitted as the bubbles are developed and finally broken, which function as a energy source to promote reaction efficiencies of various kinds of chemical reactions such as disinfection reaction in water. Therefore, this study was performed to apply the ultrasound for the disinfection method of infected drinking raw water and to discuss the limiting factors such as pH, sample volume and reaction temperature influenced on the removal efficiency of E. coli from experimental analysis of the results obtained in bench-scale plant. For the experiments to measure the influence of reaction parameters in the ultrasonic disinfection process, escalated reactivity of aqueous solutions was excellent when pH in aqueous solution was low, and sample volume was small. On the contrary, the reactivity of disinfection became elevated when reaction temperature was high. It was found that the rate constant of disinfection reaction was applied by Chick's law, reaction kinetics of Chick's law was irreversible and pseudo-first order at all the tested conditions.As a conclusion it appeared that the technology using ultrasonic irradiation can be applied to the treatment of disinfection in infected water which are difficult to be treated by conventional methods.

• 한국진공학회지
• /
• 제9권1호
• /
• pp.30-35
• /
• 2000

Indium-Tin Oxide (ITO) thin films were deposited on the commercial glass substrate by rf-magnetron sputtering. The ITO films with the thickness of 2,000~2,400 $\AA$ were prepared by changing the oxygen partial pressures of 2, 3, and 5%, as well as by changing the substrate temperature of $300^{\circ}C$ and $500^{\circ}C$. spectrophotometer, XRD, SEM, AFM, 4-point probe and Hall effect system were employed to characterize the ITO films. The optimum deposition conditions were the substrate temperature of $500^{\circ}C$ and oxygen partial pressure of 2-3%. At theses conditions, the ITO film showed the transmittance of 91%, the resistivity of $5.4\times10^{-3}\Omega$cm, the carrier concentration of $1.0\times10^{19}\textrm{cm}^{-3}$, and the carrier mobility of 150$\textrm{cm}^2$/Vsec. In XRD spectra, the (222) and (400) $In_2O_3$ planes were dominant under the optimum deposition conditions When the substrate was cleaned only by the method of ultrasonic cleaning without both pre-annealing and chemical treatment of the substrate, the ITO film exhibited the transmittance of 86%, the carrier concentration of $5.4\times10^{19}\textrm{cm}^{-3}$ and the mobility of 24$\textrm{cm}^2$/Vsec.

• Korean Chemical Engineering Research
• /
• 제51권6호
• /
• pp.666-670
• /
• 2013

실리콘계 태양전지 제조과정에서 발생하는 불량품에서 실리콘웨이퍼를 회수하는 연구를 수행하였다. 상온($25^{\circ}C$)에서 인산용액 농도, 산성불화암모늄 농도, 킬레이트제 종류 및 농도를 변화시키면서 폐태양전지의 반사방지막 및 N층의 제거 효율을 조사하였다. 10 wt% 인산, 2.0 wt% 산성불화암모늄, 1.5 wt% Hydantoin 사용 시 제거 효율이 가장 우수 하였다. 인산농도가 증가할수록 미세입자의 표면전위가 (+)로 변하여 정전기적 인력에 의해 실리콘웨이퍼 표면에 재흡착하여 표면처리 전보다 두께가 두꺼워졌으며, 표면의 오염도도 증가하였다. 인산-산성불화암모늄-킬레이트제 용액에 의한 표면처리방법은 모든 공정이 상온에서 수행되며, 공정이 단순하고, 폐수 발생량이 적고, 표면제거 효율이 우수한 방법으로 폐 태양전지의 재활용 및 기존 RCA 세정법의 대안으로 가능성이 매우 클 것으로 판단되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.150-150
• /
• 2016

Mankind is enjoying a great convenience of their life by the rapid growth of secondary industry since the Industrial Revolution and it is possible due to the invention of huge power such as engine. The automobile which plays the important role of industrial development and human movement is powered by the Engine Module, and especially Diesel engine is widely used because of mechanical durability and energy efficiency. The main work mechanism of the Diesel engine is composed of inhalation of the organic material (coal, oil, etc.), combustion, explosion and exhaust Cycle process then the carbon compound emissions during the last exhaust process are essential which is known as the major causes of air pollution issues in recent years. In particular, COx, called carbon oxide compound which is composed of a very small size of the particles from several ten to hundred nano meter and they exist as a suspension in the atmosphere. These Diesel particles can be accumulated at the respiratory organs and cause many serious diseases. In order to compensate for the weak point of such a Diesel Engine, the DPF(Diesel Particulate Filter) post-cleaning equipment has been used and it mainly consists of ceramic materials(SiC, Cordierite etc) because of the necessity for the engine system durability on the exposure of high temperature, high pressure and chemical harsh environmental. Ceramic Material filter, but it remains a lot of problems yet, such as limitations of collecting very small particles below micro size, high cost due to difficulties of manufacturing process and low fuel consumption efficiency due to back pressure increase by the small pore structure. This study is to test the possibility of new structure by direct infiltration of SiC Whisker on Carbon felt as the next generation filter and this new filter is expected to improve the above various problems of the Ceramic DPF currently in use and reduction of the cost simultaneously. In this experiment, non-catalytic VS CVD (Vapor-Solid Chemical Vaporized Deposition) system was adopted to keep high mechanical properties of SiC and MTS (Methyl-Trichloro-Silane) gas used as source and H2 gas used as dilute gas. From this, the suitable whisker growth for high performance filter was observed depending on each deposition conditions change (input gas ratio, temperature, mass flow rate etc.).

• 자원환경지질
• /
• 제56권6호
• /
• pp.715-728
• /
• 2023

익룡 발자국의 개체 및 밀집도 측면에서 세계 최대 규모로 알려진 진주 충무공동 익룡·새·공룡발자국 화석산지는 2011년 천연기념물로 지정된 이래, 2018년 일부 화석층을 현장 보존하기 위해 보호각을 설치하였다. 이 중 제2보호각에 관리중인 화석층은 기 보고된 발자국 중 약 17%에 달하는 익룡·수각류·조각류 발자국(총 679개)이 단일 층준에서 발견되어 학술적 가치가 크지만 물리적, 화학적 손상이 지속적으로 발생하여 발자국의 관찰에 어려움이 있다. 특히 화석층 표면을 피복하는 유백색 오염물은 석고와 대기오염물로 구성된 복합체의 누적현상에서 기인한다. 오염물을 구성하는 석고는 화석층 하부층준에서 기원한 칼슘과 잔디의 생육활동으로 공급되는 황이 보호각 후방의 잔디가 식재된 토양층에서 집수된 지하수에 의해 용출되고, 보호각의 일대의 수분 순환 과정에서 화석층 표면에 증발잔류하며 결정화된다. 또 다른 오염물 구성체인 화분·광물 등은 분진 배출이 어려운 보호각 갤러리창을 통해 풍성으로 유입된다. 따라서 상이한 기원을 가진 두 오염물로부터 화석층을 보존하기 위해서는 보호각의 수분 및 대기 순환 제어와 지속적인 오염물 제거가 필요하다. 분진상의 석고와 대기 오염물은 스팀 세정법으로 충분한 제거 효과가 있으며, 암회색 셰일인 화석층은 레이저 흡수능이 커 흔적화석과 퇴적구조의 물리적 손실을 동반하는 레이저 세정법은 가급적 지양하는 것이 바람직하다.