• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.138-138
• /
• 2009

Recently, thin-film solar cells of Cu(In,Ga)$Se_2$(CIGS) have reached a high level of performance, which has resulted in a 19.9%-efficient device. These conventional devices were typically fabricated using chemical bath deposited CdS buffer layer between the CIGS absorber layer and ZnO window layer. However, the short wavelength response of CIGS solar cell is limited by narrow CdS band gap of about 2.42 eV. Taking into consideration the environmental aspect, the toxic Cd element should be replaced by a different material. It is why during last decades many efforts have been provided to achieve high efficiency Cd-free CIGS solar cells. In order to alternate CdS buffer layer, ZnS buffer layer is grown by using chemical bath deposition(CBD) technique. The thickness and chemical composition of ZnS buffer layer can be conveniently by varying the CBD processing parameters. The processing parameters were optimized to match band gap of ZnS films to the solar spectrum and exclude the creation of morphology defects. Optimized ZnS buffer layer showed higher optical transmittance than conventional thick-CdS buffer layer at the short wavelength below ~520 nm. Then, chemically deposited ZnS buffer layer was applied to CIGS solar cell as a alternative for the standard CdS/CIGS device configuration. This CIGS solar cells were characterized by current-voltage and quantum efficiency measurement.

• 신재생에너지
• /
• 제17권4호
• /
• pp.36-45
• /
• 2021

To remove the Cu secondary phase remaining on the surface of a CIGSSe absorber layer manufactured by the two-step process, KCN etching was applied before depositing the CdS buffer layer. In addition, it was possible to increase the conversion efficiency by air annealing after forming the CdS buffer layer. In this study, various pre-treatment/post-treatment conditions wereapplied to the S-containing CIGSSe absorber layerbefore and after formation of the CdS buffer layer to experimentally confirm whether similareffects as those of Se-terminated CIGSe were exhibited. Contrary to expectations, it was noted that CdS air annealing had negative effects.

• 공업화학
• /
• 제25권6호
• /
• pp.577-580
• /
• 2014

CIGS 태양 전지용 cadmium (Cd)-free $In(OH)_xS_y$ 버퍼층을 화학적 용액성장법을 이용해서 형성시켰고 최적 반응시간을 파악하였다. 투과율 측정과 함께 이온집적빔 시스템으로 직접 박막을 관찰해서 박막성장 조건을 최적화 하였으며 X선 회절분석법과 X선 광전자 분광법, 주사현미경을 이용해서 박막의 특성을 파악하였다. 그 결과 $In(OH)_xS_y$ 버퍼층의 증착을 위한 최적 반응 시간은 온도 섭씨 $70^{\circ}$의 조건에서 20 min임을 확인하였으며, 이때의 버퍼층의 두께는 57 nm 가량이었고 밴드갭 에너지는 2.7 eV를 나타내었다. 아울러 molybdenum (Mo)층과 CIGS층 위에서 $In(OH)_xS_y$ 버퍼층을 형성시키는 경우에 XPS 피크의 차이는 볼 수 없었다.

• 한국통신학회논문지
• /
• 제29권6A호
• /
• pp.667-667
• /
• 2004

위성망과 같이 DBP(Delay Bandwidth Product)가 큰 고속망에서 전송 지구국의 버퍼는 일시적인 막힘 현상에 의한 전송 효율이 저하되는 것을 방지하기 위하여 큐 현상을 충분히 소화하도록 설계되어야 한다. 뿐만 아니라 버퍼의 어떠한 상태 하에서도 막힘 없는 유연한 전송 패킷의 흐름과 수많은 연결 트래픽 간의 공정성을 보장하고 접속 서비스의 특성에 따라서 정의되는 QOS를 충족시키는 기술이 중요하다. 기존의 버퍼알고리즘들은 여러 네트워크 환경의 다양한 변화에 적절히 대응하지 못하여 위성망과 같은 특수한 네트워크에 적합하지 않다. Floyd에 의해 제안된 RED(Random Early Detection) 알고리즘은 기존의 버퍼 알고리즘과 비교하여 뛰어난 버퍼관리 성능을 보여왔다. 하지만 RED 알고리즘 방식은 TCP 패킷의 연결 수나 네트워크의 변화에 적절히 대응하지 못하여 위성망과 같이 다수의 사용자가 동시 다발적으로 발생할 수 있는 환경에서는 적합하지 못하다. 본 논문에서는 입력 비율에 따라 향상된 버퍼 활용도를 가진 TARED(Target Adaptive REB) 알고리즘이 위성망을 포함한 네트워크 환경에서 향상된 성능을 보이고 제안된 TARED 알고리즘을 이용하면 입력 비율에 따른 버퍼의 점유 레벨의 오버플로우나 언더플로우가 없이 전체 시스템의 성능을 향상시킴과 동시에 네트워크의 적응능력과 시스템의 안정화에 우수함을 보일 수 있었다.

• Journal of Microbiology and Biotechnology
• /
• 제31권3호
• /
• pp.429-438
• /
• 2021

Bacterial cellulose (BC) is widely used in the food industry for products such as nata de coco. The mechanical properties of BC hydrogels, including stiffness and viscoelasticity, are determined by the hydrated fibril network. Generally, Komagataeibacter bacteria produce gluconic acids in a glucose medium, which may affect the pH, structure and mechanical properties of BC. In this work, the effect of pH buffer on the yields of Komagataeibacter hansenii strain ATCC 53582 was studied. The bacterium in a phosphate and phthalate buffer with low ionic strength produced a good BC yield (5.16 and 4.63 g/l respectively), but there was a substantial reduction in pH due to the accumulation of gluconic acid. However, the addition of gluconic acid enhanced the polymer density and mechanical properties of BC hydrogels. The effect was similar to that of the bacteria using glycerol in another carbon metabolism circuit, which provided good pH stability and a higher conversion rate of carbon. This study may broaden the understanding of how carbon sources affect BC biosynthesis.

• Bulletin of the Korean Chemical Society
• /
• 제18권12호
• /
• pp.1301-1304
• /
• 1997

Elimination reactions of (E)-2,4-dinitrobenzaldehyde O-pivaloyloxime promoted by R2NH/R2NH2+ buffer in 70% MeCN(aq) have been studied kinetically. The reaction exhibited second order kinetics and general base catalysis with Bronsted β=0.45. The Hammett ρ value decreased from 2.3 to 1.6 as the base-solvent system was changed from DBU in MeCN to R2NH/R2NH2+ buffer in 70% MeCN(aq). From these results an E2 mechanism is proposed.

• Nuclear Engineering and Technology
• /
• 제38권6호
• /
• pp.483-488
• /
• 2006

Highly radioactive waste is placed in metal canisters embedded in dense clay termed buffer. The radioactive decay is associated with heat production, which causes degradation of the buffer and thereby time-dependent loss of its waste-isolating potential. The buffer is prepared by compacting air-dry smectite clay powder and is initially not fully water saturated. The evolution of the buffer starts with slow wetting by uptake of water from the surrounding rock followed by a long period of exposure to heat, pressure from the rock and chemical reactants. It can be described by conceptual and theoretical models describing processes related to temperature (T), hydraulic (H), mechanical (M) and chemical performance (C). For temperatures below 90 C more than 75 % of the smectite will be preserved for 100 000 years but cementation may reduce the excellent performance of the buffer to a yet not known extention.

• 대한화학회지
• /
• 제53권6호
• /
• pp.805-810
• /
• 2009

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권1호
• /
• pp.37-41
• /
• 2001

HPLC separation of ionic samples tends to be more complicated and difficult to understand than that of non-ionic compounds. On the other hand, band spacing is much more easily manipulated for ionic than for neutral samples. Ion-suppression RP-HPLC method was used with organic modifier and aqueous buffer solution. In this work, five mononucleotides of cytidine-5-monophosphate (5-CMP) disodium salt, uridine-5-monophosphate disodium salt (5-UMP), guanosine-5-monophosphate disodium salt (5-GMP), inosine-5-monophosphate disodium salt (5-IMP), and adenosine-5-monophosphate disodium salt (5-AMP) were examined. Acetic acid and sodium phosphate were used as buffers, and methanol as an organic modifier. A new relationship between the retention factor and the buffer concentration at a fixed modifier content (5% of methanol) could be expressed by following: K = (k(sub)-1 + k(sub)0 (k(sub)B/k(sub)S)/(1 + (k(sub)B/k(sub)S) C(sub)B(sup)a), where C(sub)B was the concentration of buffer. Using this relationship, the calculated values closely matched the experimental data. The derived relationship showed that as the buffer concentration increased, the retention factor approached a certain value, and this was buffer dependent.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
• /
• pp.236-244
• /
• 2005

Radioactive wastes arising from a wide range of human activities are in many different physical and chemical forms, contaminated with varying radioactivity. Their common feature is the potential hazard associated with their radioactivity and the need to manage them in such a way as to protect the human environment. The geological disposal is regarded as the most reasonable and effective way to safely disposal high-level radioactive wastes in the world. The conceptual model of geological disposal in China is based on a multi-barrier system that combines an isolating geological environment with an engineered barrier system. The buffer is one of the main engineered barriers for HLW repository. The buffer material is expected to maintain its low water permeability, self-sealing property, radio nuclides adsorption and retardation property, thermal conductivity, chemical buffering property, overpack supporting property, stress buffering property over a long period of time. Benotite is selected as the main content of buffer material that can satisfy above. GMZ deposit is selected as the candidate supplier for Chinese buffer material of High Level Radioactive waste repository. This paper presents geological features of GMZ deposit and basic property of GMZ Na bentonite. GMZ bentonite deposit is a super large scale deposits with high content of Montmorillonite (about $75\%$) and GMZ-l, which is Na-bentonite produced from GMZ deposit is selected as reference material for Chinese buffer material study.