• 한국지구과학회지
• /
• 제35권4호
• /
• pp.225-236
• /
• 2014

다변량통계기법은 수리지구화학 자료의 분석 및 해석에 많이 이용되어 왔다. 본 연구에서 대응분석과 주성분분석을 동시에 사용하여 인위적인 활동에 의한 지하수의 특징을 살펴보았다. 본 연구의 목적은 NETPATH 프로그램 속의 WATEQ4F를 이용하여 지하수 화학성분의 분화를 계산하고 이를 다변량통계기법을 이용하여 지구화학적인 정보를 추출하는 것이다. 연구지역은 한반도의 남동쪽에 위치한 울산의 LPG 저장시설이다. 본 연구지역에서는 다른 저장시설에서 관찰되는 초염기성의 조성을 가지는 지하수가 관찰되었다. 이러한 인위적인 영향에 의한 높은 pH를 가지는 지하수로 인해 Al의 분화특징과 탄산염의 침전을 유발할 수 있다. 본 연구에서는 연구지역에 지하수에 영향을 주는 두 인위적인 요소(세정작용와 시멘트영향)에 의해서 수리지구화학적인 특징과 상이 어떻게 변하는 가에 초점을 두었다. 이전 연구결과와 두 통계분석을 통해 제시된 결과를 비교하여 지구화학적인 정보를 이용한 주성분분석과 대응분석인 수리지구화학 연구에서 기초연구로 활용될 수 있음을 알 수 있다.

• 조명전기설비학회논문지
• /
• 제20권2호
• /
• pp.45-49
• /
• 2006

본 논문은 마이크로 전극 시스템에 의하여 연료전지 및 Ni-MH 전지로의 응용을 가정한 $AB_5$계 수소저장합금인 $MmNi_{3.55}Co_{0.75}Mn_{0.4}Al_{0.3}$의 단일 입자에 대하여 전기화학적인 평가를 수행하였다. 즉 Carbon fiber 마이크로 전극을 합금 입자 한개 위에 전기적인 접촉을 이루도록 조정하고, 합금 입자 내에서 수소원자의 겉보기 화학적 확산계수를 계산하기 위하여 Potential-Step 실험을 실시하였다. 여기에서 사용되는 합금입자는 치밀하고 전도성이 있는 구형이므로 데이터 해석을 위해 구형확산 모델을 적용하였다. 실험결과로서 겉보기 확산계수($D_{app}$)는 수소 흡장 및 방출되는 전 과정에서 $10^{-9}$과 $10^{-10}[cm^2/s]$ 수준인 것으로 확인되었다. 마이크로 전극 측정 시스템에 의한 단일 입자의 전기화학적 평가는 기존의 Composite Film 전극에 비해 수소저장합금에 대해 보다 상세하고 정확한 정보를 쉽게 얻을 수 있었다.

• Korean Chemical Engineering Research
• /
• 제45권3호
• /
• pp.249-257
• /
• 2007

사각파 모형은 회분식 공정-저장조 망구조의 최적설계에 성공적으로 적용되었다. 설계된 망구조는 재순환 흐름을 포함하는 회분식의 모든 생산 재고 및 분배 체계를 내포한다. 본 연구에는 사각파 모형의 적용범위를 연속 또는 회분식 공정 뿐 만 아니라 반연속 공정에 까지 확대하려 한다. 이전의 연구에서는 원료조성이나 제품수율은 알려진 상수로 취급되었다. 본 연구에서는 이러한 제약이 완화되어 원료조성이나 제품 수율이 최적화 되어져야 하는 독립변수로 취급된다. 이러한 수정은 정유공장에서 흔히 접하는 최적제품 배합문제를 취급할 수 있게 한다. 원료조성과 제품수율이 독립변수일 때 발생하는 많은 문제의 복잡성에도 불구하고 사각파 모형은 여전히 해석적인 최적용량 공식을 제공한다. 최적공장설계에 적용되는 본 연구의 유용성은 고밀도 폴리에틸렌 공장설계의 예를 통해 나타내었다. 연구결과를 토대로 모든 공정의 최적성을 비교할 수 있는 척도를 제시하였다. 이 척도는 다수의 공정의 성능을 직접 비교할 수 있게 하므로 공정의 상태를 진단하는 유용한 도구가 될 것이다. 공정의 비용이 유속의 제곱근에 비례한다는 결과는 공장설계에서 늘리 알려진 6/10 경험법칙과 유사하다.

• Membrane and Water Treatment
• /
• 제6권2호
• /
• pp.113-126
• /
• 2015

Salinity gradient power (SGP) systems have strong potential to generate sustainable clean electricity for 24 hours. Here, we introduce a solid-salt pressure-retarded osmosis (PRO) system using crystal salt powders rather than seawater. Solid salts have advantages such as a small storage volume, controllable solubility, high Gibbs dissolution energy, and a single type of water intake, low pretreatment costs. The power densities with 3 M draw solutions were $11W/m^2$ with exothermic energy and $8.9W/m^2$ without at 35 bar using a HTI FO membrane (water permeability $A=0.375L\;m^{-2}h^{-1}bar^{-1}$). These empirical power densities are ~13% of the theoretical value.

• 한국태양에너지학회 논문집
• /
• 제23권1호
• /
• pp.29-38
• /
• 2003

To develope chemical heat pump using available energy sources, solar heat and other kinds of waste thermal energy, we have studied the material and heat transfer rate in the cylindrical bed reactor packed with Calcined Dolomite. Our results from the studies are as follows ; 1 The time needed to complete dehydration reaction at the wall side of the cylindrical reactor(r/rL=0.5) was shorter than that of the center(r/rL=0.0) as much as 12%. 2. Two dimensional (radial and circumferential) partial differential equations, concerning heat and mass transfer rate in the packed bed of calcined Dolomite, are solved numerically to describe the characteristics of the reaction in the cylindrical reactor. The solution reads rate of reaction in the packed bed reactor depends on the temperature and concentration of reactants. These results read the supplied heat transfers from the wall side of the cylinder to the center, dehydration reaction begins at the inner side of the wall of the cylindrical reactor and the dehydration reaction proceeds from the wall side to center of cylinder.

• Bulletin of the Korean Chemical Society
• /
• 제35권6호
• /
• pp.1799-1805
• /
• 2014

In this article, we described about the preparation and electrochemical properties of a flexible energy storage system based on a plastic polyethylene terephthalate (PET) substrate. The PET treated with UV/ozone was fabricated with multilayer films composed of 30 polyaniline (PANi)/graphene oxide (GO) bilayers using layer-by-layer assembly of positively charged PANi and negatively charged GO. The conversion of GO to the reduced graphene oxide (RGO) in the multilayer film was achieved using hydroiodic acid vapor at $100^{\circ}C$, whereby PANi structure remained nearly unchanged except a little reduction of doping state. Cyclic voltammetry and charge/discharge curves of 30 PANi/RGO bilayers on PET substrate (shorten to PANi-$RGO_{30}$/PET) exhibited an excellent volumetric capacitance, good cycling stability, and rapid charge/discharge rates despite no use of any metal current collectors. The specific capacitance from charge/discharge curve of the PANi-$RGO_{30}$/PET electrode was found to be $529F/cm^3$ at a current density of $3A/cm^3$, which is one of the best values yet achieved among carbon-based materials including conducting polymers. Furthermore, the intrinsic electrical resistance of the PANi-$RGO_{30}$/PET electrodes varied within 20% range during 200 bending cycles at a fixed bend radius of 2.2 mm, indicating the increase in their flexibility by a factor of 225 compared with the ITO/PET electrode.

• 한국태양에너지학회 논문집
• /
• 제22권1호
• /
• pp.9-21
• /
• 2002

To develope chemical heat pump using available energy sources, solar heat and other kinds of waste thermal energy, we have studied the heat transfer rate in cylindrical bed reactor packed with calcined Dolomite. Two dimensional (radial and circumferential) Partial differential equations, concerning heat and mass transfer in packed bed of calcined Dolomite, are solved numerically to describe the characteristics of the reaction of calcined Dolomite and heat transfer. The results obtained by numerical analysis about two dimensional profiles of temperature and conversion of reactant in the packed bed reactor and the amount of exothermic heat released from the reactor are follows. It was found that all of calcined Dolomite packed bed kept the reaction temperature of about 750K throughout the entire part of the bed, immediately after the steam was introduced exothermic reaction of hydration was proceeded from the packed bed inpu to output and from wall side to center. The rate of thermochemical reaction depends on the temperature and concentration and it is also governed by the boundary conditions and heat transfer rate in the particle packed bed.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.237-240
• /
• 2002

Micro catalytic reactors are alternative propulsion device that can be used on a nano satellite. When used with a monopropellant, $H_2O_2$, a micro catalytic reactor needs only one supply system as the monopropellant reacts spontaneously on contact with catalyst and releases heat without external ignition, while separate supply lines for fuel and oxidizer are needed for a bipropellant rocket engine. Additionally, $H_2O_2$ is in liquid phase at room temperature, eliminating the burden of storage for gaseous fuel and carburetion of liquid fuel. In order to design a micro catalytic reactor, an appropriate catalyst material must be selected. Considering the safety concern in handling the monopropellants and reaction performance of catalyst, we selected hydrogen peroxide at volume concentration of 70% and perovskite redox catalyst of lantanium cobaltate doped with strondium. Perovskite catalysts are known to have superior reactivity in reduction-oxidation chemical processes. In particular, lantanium cobaltate has better performance in chemical reactions involving oxygen atom exchange than other perovskite materials. In the present study, a process to prepare perovskite type catalyst, $La_{0.8}Sr_{0.2}CoO_3$, and measurement of its propellant decomposition performance in a test reactor are described.

• 대한화학회지
• /
• 제62권5호
• /
• pp.352-357
• /
• 2018

Celecoxib (4-[5-(4-methylphenyl)-3-(trifluoromethyl)-1H-pyrazol-1-yl]benzenesulfonamide) is a cyclooxygenase-2 inhibitor used in the treatment of arthritis, acute pain, and dysmenorrhoea. Celecoxib is a Biopharmaceutics Classification System (BCS) class II compound whose oral bioavailability is highly limited owing to its poor aqueous solubility. Several polymorphs of celecoxib have been identified as Form I, Form II, and Form III with melting points of about $162.8^{\circ}C$, $161.5^{\circ}C$, and $160.8^{\circ}C$, respectively. Form IV was generated from the precipitated suspension in the presence of HPMC (Hydroxypropyl methylcellulose) and Polysorbate 80. A rapid rate of dissolution is useful because the rate of dissolution of a drug typically increases its bioavailability. The aim of this study was to investigate the possibility of production of new crystal form of celecoxib that has higher solubility than Form III. New crystal form of celecoxib (Form A) has been isolated by recrystallization and characterized by differential scanning calorimetry (DSC), thermogravimetric (TG) analysis and powder X-ray diffractometry (PXRD). Form A was dissolved faster than Form III. At 30 minutes, the dissolution of Form A was 97.3%, whereas the dissolution of Form III was 82.2% (p < 0.1). After storage of three months at $20^{\circ}C$, in 24% RH (Relative Humidity), the crystal form was not transformed.

• 한국세라믹학회지
• /
• 제52권3호
• /
• pp.209-214
• /
• 2015

Silicon nitride films were deposited at $100^{\circ}C$ by using the catalytic chemical vapor deposition technique. The source gas mixing ratio, $R_N=[NH_3]/[SiH_4]$, was varied from 10 to 30, and the hydrogen dilution ratio, $R_H=[H_2]/[SiH_4]$, was varied from 20 to 100. The breakdown field strength reached a maximum value at $R_N=20$ and $R_H=20$, whereas the resistivity decreased in the same sample. The relative permittivity had a positive correlation with the breakdown field strength. The capacitance-voltage threshold curve showed an asymmetric hysteresis loop, which became more squared as $R_H$ increased. The width of the hysteresis window showed a negative correlation with the slope of the transition region, implying that the combined effect of $R_N$ and $R_H$ overides the interface defects while creating charge storage sites in the bulk region.