• 한국안전학회지
• /
• 제34권4호
• /
• pp.111-118
• /
• 2019

Accidents occurring due to natural disasters in chemical process facilities where technologies are concentrated can cause secondary damage. The concept of the relationship between natural disasters and highly intensive technologies has evolved into the Natech (Natural Hazards Triggered Technological Disaster) research. Currently, the number of earthquakes is increasing all over the Korean peninsula. To assess the risk of Natech when an earthquake has occurred in South Korea, the Rapid Natech Risk Assessment Tool (RAPID-N) developed by the European Commission's Joint Research Center (EC JRC) was used in the present study. The RAPID-N can be used for Natech risk assessment based on mapping and can be utilized for sufficient preparation for reduction of the effects of Natech accidents. A total of 261 chemical facilities actually existing in Pohang were initially analyzed to select eight facilities and the Pohang earthquake that occurred in 2017 was implemented in the RAPID-N utilizing the shake map. High risk areas were selected through Natech risk assessments for the selected eight work places and countermeasures for the areas were suggested. High risk areas exist depending on the location, since the damage influence ranges could be overlapped and each chemical facility has an independent probability of Natech. Therefore, studies on Natech emergency plans and emergency evacuation routes should be actively conducted considering such high risk areas. The present study was conducted to demonstrate the feasibility of Natech risk assessment in South Korea through the RAPID-N. These findings can be used as a reference material to lay a foundation for Natech risk assessment and related policies in South Korea.

• 대한안전경영과학회지
• /
• 제20권1호
• /
• pp.1-9
• /
• 2018

As the chemical industry becomes more advanced, the awareness of chemical accidents is rising, and legal systems for chemical safety management are strengthened. In this study, quantitative risk assessment of liquid chlorine leak was conducted. Risk assessment was performed in the order of frequency analysis, consequence analysis, and risk calculation. The individual risk was presented in the form of contour lines. The social risk was expressed by the FN curve. The risk of day and night was in an unacceptable area, so it was required to mitigate risk. Therefore in-building, which could trap the pool, was selected as a risk mitigation measure. As a result of the cost benefit analysis, it was concluded that this measure should be reasonably implemented.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2019년도 추계학술대회
• /
• pp.267-267
• /
• 2019

위험물 운반선에 적재된 물질에 화재나 폭발사고와 같은 선박사고가 발생하는 경우, 그 경로가 매우 복잡하기 때문에 사고의 원인을 추정하기가 어렵다. 이는 사고를 일으킨 원인에 대한 증거가 없거나, 선박 안에서 어떤 화학반응이 일어났는지를 시각적으로 파악하기 힘들기 때문이다. 본 연구에서는 폭발사고를 야기시키는 화학물질에 화학반응식을 도입한 사건가지분석(Event Tree Analysis, ETA)기법을 적용하여 선박에 적재된 화학물의 화재사고 경로를 추정하는 연구를 하였다. 그 결과 다양한 화학반응식을 나타낼 수 있었으며, 그것을 ETA기법에 적용하여 폭발경로를 보다 시각화 할 수 있었다.

• 한국토양비료학회지
• /
• 제49권5호
• /
• pp.584-588
• /
• 2016

The current study was carried out to investigate total and inorganic arsenic (As) concentrations in 112 rice samples (husked rice and polished rice) grown around the abandoned mining areas and to estimate the potential health risk through dietary intake of rice in Korea. Mean concentrations of total As in husked rice and polished rice were 0.23 and $0.13mg\;kg^{-1}$, respectively. Also, average inorganic As concentrations in husked rice and polished rice were 0.09 and $0.05mg\;kg^{-1}$, respectively. These levels are lower than the standard guideline value ($0.2mg\;kg^{-1}$) for inorganic As in polished rice recommended by Korea Ministry of Food and Drug Safety and Codex. For health risk assessment, the average values of cancer risk probability was $5.7{\times}10^{-5}$ which was less than the acceptable cancer risk of $10^{-6}{\sim}10^{-4}$ for regulatory purpose. Also, hazard quotient values were lower than 1.0. Therefore, these results demonstrated that human exposure to inorganic As through dietary intake of rice collected from abandoned mining areas might not cause adverse health effects.

• 한국가스학회지
• /
• 제3권3호
• /
• pp.9-16
• /
• 1999

도시지역에 위치한 위해 시설 특히 가스에너지 관련 시설은 최근에 이르러 그 사고로 인해 막대한 재산 및 인명 피해를 동반하는 등 지역 주민에 위험 대상으로 등장했다. 이러한 가스에 관련된 사고의 영향을 예측하고 줄이기 위하여 위험성 평가를 이용한 종합적인 안전관리 시스템이 절대적으로 요구된다. 본 연구에서는 이런 상황들과 최근의 시대적 여건들을 고려하여 종합적인 정량적 위험성 평가 기반 구조를 구축하고 관련 모델들의 원만한 연관성을 갖게 하기 위한 개념 및 이론을 제시하였다 이를 위해 LPG시설의 사고 시나리오에 대한 위험성을 정량화 하여 LPG 저장시설에 대한 위험성을 평가할 수 있는 방안과 정량화 된 위험성을 표현하기 위하여 개인적 위험과 사회적 위험의 활용방안을 제시하였으며 이것들을 효율적으로 지원할 수 있는 지원 프로그램의 개발을 병행하였다.

• 한국산업보건학회지
• /
• 제32권4호
• /
• pp.350-358
• /
• 2022

Objectives: For chemical risk assessment in workplaces, it is necessary to determine a reference value through hazard assessment. In general, OEL (Occupational Exposure Limit) is used for this value. However, since chemicals with OEL were not enough, the concept of DNEL (Derived No Effect Level) was introduced in chemical safety assessment. In this study, the possibility and approach of applying DNEL for chemical risk assessment in domestic workplaces were investigated. Methods: The characteristics of OEL and DNEL were investigated. In addition, ACGIH TLV and GESTIS DNEL were compared and the corresponding scopes were analyzed among the chemical substances notified in South Korea. Results: OEL and DNEL are similar concepts reflecting reference values that should not be exposed based on health effects. While their evaluation and derivation are determined based on similar information and procedures, they may vary depending on the responsible actor, data availability, principles of judgment, and more. As a result of the comparative analysis of ACGIH TLV and GESTIS DNEL, it was confirmed that there is some correlation between TWA and DNEL. The conservatism of DNEL was around 50%. Additionally, it was found that the available range of DNEL among chemicals in South Korea is considerable. Conclusions: This study showed that DNEL can be applied when assessing the risk of chemical substances in domestic workplaces considering several regards. However, since this is not the same level as OEL, we have proposed a proper approach to carry out risk assessment step by step.

• 한국식품위생안전성학회지
• /
• 제23권3호
• /
• pp.276-283
• /
• 2008

국내 외 선행연구결과에 의한 어린이 출생 전 후 건강에 영향을 미칠 수 있는 주요 유해물질은 inorganic arsenic, BPA, 2,4-D, dichlorvos, methylmercury, PCBs, pesticide, phthalate, PFOA/PFOS, vinyl chloride 등으로서 국내에서도 이들을 포함한 확인 연구가 수행되어져야 할 것이다. 또한 어린이들의 행동발달과 연관된 생활환경에서의 다양한 인체노출이 확인됨에 따라 탁아소, 유치원과 같은 경우 어린이 활동공간을 대상으로 환경모니터링 및 위해관리활동도 병행되어야 할 것이다. 또한 어린이 건강에 영향을 미치는 유해물질을 중심으로 독성평가, 인체영향연구, 환경 및 인체모니터링과 위해평가를 수행하므로 유해물질의 원인-상관관계를 확인하고 사실자료에 근거한 관리정책을 반영하는 것이 바람직하다.

• 한국안전학회지
• /
• 제33권5호
• /
• pp.141-149
• /
• 2018

In a PCB factory, there is a corrosive chemical substance supply system that can causes major leakage accidents. These accidents can give rise to shut down the factory and do residents damage that cause enormous loss of properties. To mitigate these risks, it is necessary to provide a chemical disaster prevention system. Moreover, after considering the situation and environment of the production site, it is of great importance to build an optimal chemical accident prevention system by reflecting risk reduction measures from the point of process design and by assessing quantitative risk based on reliability data. However, because there was no established database of the reliability about facilities and equipment that can be used in the domestic, the business site and consulting organization had being used the reliability data such as USA CCPS(Center for Chemical Process Safety). In these days, Korean institutes are studying on reliability data utilization method of quantitative risk assessment for preventing chemical accidents and domestic utilization algorithms and storage bed of reliability data. This study presents samples of reliability database about the chemical substance supply system that constructed from the history data such as failure, maintenance for 10 years at a PCB factory. Also, this work proposes the safety design criteria for supply facilities of corrosive chemical substance by assessing quantitative risk on the basis of the reliability data.

• Safety and Health at Work
• /
• 제8권2호
• /
• pp.206-211
• /
• 2017

Background: Self-reported low back pain (LBP) has been evaluated in relation to material handling lifting tasks, but little research has focused on relating quantifiable stressors to LBP at the individual level. The National Institute for Occupational Safety and Health (NIOSH) Composite Lifting Index (CLI) has been used to quantify stressors for lifting tasks. A chemical exposure can be readily used as an exposure metric or stressor for chemical risk assessment (RA). Defining and quantifying lifting nonchemical stressors and related adverse responses is more difficult. Stressor-response models appropriate for CLI and LBP associations do not easily fit in common chemical RA modeling techniques (e.g., Benchmark Dose methods), so different approaches were tried. Methods: This work used prospective data from 138 manufacturing workers to consider the linkage of the occupational stressor of material lifting to LBP. The final model used a Bayesian random threshold approach to estimate the probability of an increase in LBP as a threshold step function. Results: Using maximal and mean CLI values, a significant increase in the probability of LBP for values above 1.5 was found. Conclusion: A risk of LBP associated with CLI values > 1.5 existed in this worker population. The relevance for other populations requires further study.

• 한국안전학회지
• /
• 제22권6호
• /
• pp.35-40
• /
• 2007

As a way of improving the safety of the chemical facilities, the risk based-inspection(RBI) was executed for the facilities of the applied petrochemical plant using KS-RBI Ver. 3.0 program developed based on the API-581 based resource document(BRD). From an evaluation result of KS-RBI program, we could find the evaluation of the process safety management(PSM) for the applied plant, risk of the applied process, risk of static facilities and pipes, and the demage mechanism of the facilities. Also, we could suggest a proper inspection plan(frequency and method of inspection) using the calculated risk and the status of the facilities. Therefore, the applied plant could be achieved a reduced inspection cost by an extension of inspection frequency, improved productivity, improved reliability of the facilities, and a computerized history management.