• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.1
• /
• pp.115-123
• /
• 1990

The purpose of this study was to examine the uses of coal ash as a type of construction material. The methods of examination were chemical anlysis, soil laboratory test and the soil vibration test. Materials used were coal ash obtained as a by-product from 5 thermal power plants in Yongdong, Yongwol, Sochon(anthracite coal) and in Samchonpo and Honam (bituminous coal). Over 70% of the coal ash consisted of silica and alumina. The fly ash grain size showed a uniform distribution from fine-sand to silt, and that of the bottom ash showed from sand to gravel. The specific gravity and density of the coal ash were low. The long term strength increased gradually due to the self-setting property resulting from pozzolanic activity. The shear strength was higher than that of general soil. Cohesion and optimum moisture content of anthracite coal ash were higher than bituminous coal ash, whereas the maximum dry density was higher in bituminous coal ash. The coal ash dynamic Young's modulous curve range was similar to that of general soil. Of the results from the soil vibration test by car-running, the size relative acceleration level in the ash pond was higher than that of natural ground, but the damping ratio was lower than that of natural ground near the ash pond. The coal ash has more advantageous engineering properties than general soil with particles of the same size. For example, the California Bearing Ratio of the bottom ash at both Yongdong and Yongwol was 77~137%. Therefore we expect that if further study is done, coal ash can be used as a construction material when reclaiming seashore, construction embankments, road construction, making right-weight aggregate, or as a general construction material.

• Korean journal of food and cookery science
• /
• v.15 no.3
• /
• pp.203-209
• /
• 1999

The effect of several hydrocolloids on the rheological behavior of wheat flour was investigated. The influence of the selected hydrocolloids (alginate, carrageenan, CMC, guar, locustbean and xanthan) on wheat flour was tested by using two different techniques; amylograph and texture analyzer. In order to have a general overview of their effects hydrocolloids were chosen from different sources implying a broad diversity of chemical structures. The hydrocolloid addition decreased the brightness(L) but increased yellowness(b). The interaction between hydrocolloid and flour produces a slight modification of the amylogram parameters, being the most clearly affected parameter breakdown, which is increased by carrageenan, guar and xanthan. Hardness and cutting force were augmented by hydrocolloid addition, while springeness was decreased except guar and locustbean. In summary, when looking for the improvement of the noodle texture, guar, locustbean are the best candidate additives due to their effects on pasting and texture properties. These hydrocolloids increase the hardness, cutting force, gumness, chew-ness, so were thought to increase the eating quality. So, each tested hydrocolloid affected in a different way the rheological properties of wheat flour, the results obtained are important for the appropriate use of these hydrocolloid as ingredients in the noodle making process.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.3
• /
• pp.167-173
• /
• 2002

This experiment was conducted to figure out the change of soil physical properties, rice growth and yield with the years of continuous cultivation in direct dry-seeding and no-tillage machine transplanting. Experiments were conducted at NHAES(National Honam Agricultural Experiment Station, RDA, Iksan, Cheon Buk Province, South Korea) with a rice variety "Dongjinbyeo" from 1995 to 2000. In no-tillage machine transplanting cultivation, organic matter in soil was higher than that on direct dry-seeding and was significantly high in topsoil. Problematic weed species were E. crus-galli B., A. keisak H., and L. japonica M. Plant height and tiller number m-2 were higher in common-tillage during the total growth duration. The highest weedy rice occurrence of 27.5% was observed in live years' continuous direct dry-seeding and followed by 6.2%, in four years', and 3.7%, in three years'. The highest yield reduction of 38% was observed in five years' continuous direct dry-seeding. The reduction may resulted from the competition between weedy rice and cultivated rice.

• Economic and Environmental Geology
• /
• v.47 no.2
• /
• pp.87-96
• /
• 2014

The objectives of this study were to characterize the physicochemical properties and mineralogy of Hwangto (yellow residual soils) from the southwestern part of Korea and to understand the soil-forming processes of the residual soils from their parent rocks. Both the yellowish residual soils as well as the unweathered and weathered parent rocks were obtained from Jangdong-ri, Donggang-myun, Naju, Jeollanam-do, Korea. The soil samples were examined to analyze the said soil's physicochemical properties such as color, pH, and particle size distribution. A scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis, transmission electron microscopy (TEM) and X-ray diffraction (XRD) analysis were performed in order to understand the mineralogy, chemical composition, and morphology of the soils. Two thin sections of a parent rock were analyzed to study its mineral composition. A particle size analysis of the soils indicates that the residual soil consists of mainly silt and clay (approximately 95%) and that soil textures are silty clay or silt clay loam. The soil colors of the residual soil are dark brown (7.5YR 3/4) through yellowish red (5YR 4/6). The pH of the residual soil ranges from 4.3 to 5.1. The major minerals of the parent rocks were quartz, biotite, chlorite, and plagioclase. The mineralogy of the sand fraction of the residual soil was quartz, biotite, muscovite and sanidine. The mineralogy of the silt fraction of the residual soil was quartz, biotite, muscovite, Na-feldspar, K-feldspar, and sanidine. The clay mineralogy of the soil was goethite, kaolinite, ilite, hydroxy-interlayed vermiculite(HIV), vermiculite, mica, K-feldspar and quartz. The mineral composition of the residual soil and the parent rock indicates that feldspar and mica in the parent rock weathered into illite, vermiculite and hydroxy-interlayed vermiculite(HIV), and finally changed into kaolinite and halloysite in the yellowish residual soils.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.1
• /
• pp.37-48
• /
• 1973

The purpose of this studies is to improve the cohesion of raw silk through various analyses on cocoon drying, cooking, reeling, re-reeling, and on the properties of water. Also we investigated the correlation between silk testing items which we have reached to the following results. 1. Drying of cocoon When cocoons were slowly dried with 100$^{\circ}C$, the results of cohesion became much better. On the other hand, the results were considerably decreased in case the temperature with 115$^{\circ}C$. 2. Cooking of cocoon In case of the cooking of cocoon, we found that the result of cohesion was best with incomplete cooking, that of the control was next, while in over cooking, the results were very low. Also the results of cohesion were much better when using the method of over cooking with sericin arrestive agent than that of incomplete cooking with sericin agglutinating agent. 3. Reeling of cocoon A) When the temperature of reeling bath was 25-45$^{\circ}C$, the results of cohesion test were much better, but at the temperature below 25$^{\circ}C$ or above 45$^{\circ}C$, the results became worse. B) With out the process of croissieur, the results of cohesion were too bad, but in case of croissieur more than 1cm, cohesion became better rapidly. Further more, we understood that the results of cohesion were improving slightly with longer length of croissieur. C) When the velocity of reeling was increased, the results of cohesion also improved. The best results were shown when reeling velocity was 180-220 r.p.m. But when the velocity was increased more than 220 r.p.m., the results of cohesion got worse more or less. D) When the temperature of the drying pipe in reeling machine was raised, the results of cohesion also showed a tendency to improve. 4. Re-reeling A) We could net reach a conclusion as to have correlation between the number of dipping repeat in vacuum tank and the results of cohesion before re-reeling process. B) When we used Seracol 500 as an agglutination protective agent with l/1000 to l/2000 of water, the results of cohesion test were better. C) When we used Pearl-lite as an agglutination protective agent with 1/1000 to 1/2000 of water, the results of cohesion were considerably better. D) We gained tile best results when used Cohesion Improving Chemical, A-80, with 500-1500 times diluted. 1) Results of cohesion was improved when humidity was low or temperature was high in the rereeling machine. 5. Filature water A) The water pH near the isoelectric point of protein showed the best cohesion, but the farther water pH, the worser results were obtained. B) With the increasing of M-alkalinity in filature water, the results of cohesion were worse. Above all, we understood the tendency of the results of cohesion get worse when the M-alkalinity is increased above 200 ppm. C) By increasing the total hardness of the filature water, it improved the results of cohesion. Especially, when the total hardness was above 300ppm, the results were extremely high. 6. Effects combination of each results A) The result of effects combination in filature processes with the obtained best conditions was distinctively improved. But the results could not reach in mathematicaly double effect. When reelied under worse conditions, the results of cohesion test were too bad. There was "effect limit" for the promotion. B) Generally the results of cohesion were bad when the filature conditions(the temperature, pressure and the properties of water, etc) are processed as sericin loss to be high. On the other hand, the results were very good when lower sericin loss was controlled in filature conditions. C) When filature conditions such as reeling velocity and croissieur length provide pysical cohesion ability and when raw silk dry fast during reeling and re-reeling, we found the result of cohesion was better. 7. Correlation of silk testing items. A) A negative correlation exists between the results of cohesion test and cleanness defect. Another word, the result of cohesion test was found to be worse as cleanness defect increased. B) In cleanness, cohesion has negative correlation against the number of slugs, but we could not find any correlation against long loops, loose ends. C) Cohesion has negative correlation against average neatness and low neatness defect. The better the results of neatness respectively, the better the results of cohesion found. D) There is no correlation between tenacity and the results of cohesion test, but there was high positive correlation between the results of elongation and those of cohesion test. The more elongation, the better the results of cohesion was found.

• Korean journal of food and cookery science
• /
• v.21 no.1 s.85
• /
• pp.24-32
• /
• 2005

Changes in apple slices during cold storage were investigated by evaluating the physical properties such as degree of browning and compression force. Chemical properties such as PPO activity and total phenol contents were also determined and sensory evaluation was carried out. The correlation analysis between browning parameters was conducted. Degree of browning was increased in the order of fresh apple slice, water-dipped apple slice, $0.5\%$ ascorbic acid solution-dipped apple slice and CP(caramelization product) from sucrose-dipped apple slice. PPO activity was increased in the order of fresh apple slice, water-dipped apple slice, $0.5\%$ ascorbic acid solution-dipped apple slice and CP(caramelization product) from sucrose-dipped apple slice. Amongst several treatments, CP from sucrose-dipped apple slice showed the lowest degree of browning and PPO activity. Total phenol contents were decreased from 60 to 56.2 mg and from 59.6 to 56.0 mg in fresh apple slice and water-dipped apple slice, respectively, but CP from sucrose-dipped apple slice and $0.5\%$ ascorbic acid solution-dipped apple slice were increased from 51.9 to 52.8 mg and from 54.1 to 54.4 mg, respectively, showing the smallest changes when compared with fresh apple slice and water-dipped apple slice. Compression forces of apple slices during cold storage were decreased in the order of fresh apple slice, water-dipped apple slice, $0.5\%$ ascorbic acid solution-dipped apple slice and CP from sucrose-dipped apple slice. In sensory evaluation of apple slices during cold storage, CP from sucrose-dipped apple slice had higher score than the other treatments. In addition, a significant correlation was observed among degree of browning, PPO activity and phenol content. Therefore, CP from sucrose-dipped apple slice seems to be effective in controlling of enzymatic browning during cold storage. In addition, CP from sucrose-dipped apple slice seems to be effective on other several factors. These results suggest that CP from sucrose should be a potential source for controlling enzymatic browning during storage of vegetables and fruits.

• Food Science of Animal Resources
• /
• v.31 no.6
• /
• pp.914-920
• /
• 2011

The aim of this study was to analyze the effects of salt and drying period on the physicochemical and sensory parameters of dry-cured ham ripened in a controlled condition. In this study, three treatments were performed: High salt group (HS), salted with 7 g $kg^{-1}salt$ (w/w); Middle salt group (MS), 5 g $kg^{-1}salt$ and; Low salt group (LS), 3 g $kg^{-1}salt$. Three conditions of drying period were applied including 180, 270 and 360 d at $19^{\circ}C$ and 65% relative humidity, and the physicochemical character and sensory properties of M. biceps femoris were investigated. pH and water activity were decreased with increasing drying period, and the pH of LS was higher than that of other treatments (p<0.05). When increasing the drying period, the hardness of HS was steadily raised for 360 d, whereas LS and MS hardened between 180 and 270 d (p<0.05), and there was no significant difference after 270 d. Cohesiveness, glumness and chewiness had a positive relationship with the drying period. Also, springiness, glumness and chewiness showed a positive relationship with salt level. Chroma and hue value were improved by increasing the salt level. As the drying period increased, the rate of hardness and flavor intensity was increased. In general, this research can be used as essential information for the mass production of dry cured ham.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.3
• /
• pp.350-355
• /
• 2003

This study was carried out to clarify the effect of addition of perilla leaf powder (PLP) and carcass grade on the quality and palatability of pork sausage. The chemical composition, pH, calorie, water holding capacity, surface color, textural properties and amino acid composition of the samples were determined, and sensory characteristics were evaluated. Moisture and crude ash were not different among sausage of four type. Crude fat of grade B sausage was higher than that of grade E sausage, and grade B sausage added PLP was higher than grade B sausage without PLP. Crude Protein of grade E sausage was higher than that of grade B sausage. The pH of grade E sausage added PLP was highest, and calorie of grade B sausage without PLP was highest among sausage of four type. Water holding capacity of grade B added and free PLP was significantly higher than grade I sausage. The residual nitrite of sausage added PLP was significantly lower than sausage without PLP. In case of Hunter's $L^{*}$, grade B sausage and free PLP sausage were significantly higher than grade E sausage and sausage added PLP, respectively. In case of Hunter' $a^{*}$, grade E sausage and free PLP sausage were significantly higher than grade B sausage and sausage added PLP. Hunter's $b^{*}$ of sausage added PLP was higher than that of free PLP sausage. Textural properties, hardness, springiness, cohesiveness and chewiness were significantly different among sausage of four type, but gumminess of grade E added PLP was lowest among sausage of four type. Total amino acid was not significantly different among sausage of four type. Sensory color and texture of grade B sausage were superior to grade I sausage, palatability of free PLP sausage was superior.sage was superior.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.5
• /
• pp.752-760
• /
• 2015

Effects of maltogenic amylase on textural properties of dough and quality characteristics of white pan bread were investigated. White pan bread was prepared with four different levels of maltogenic amylase contents (M-1: 0.048 U/g, M-2: 0.060 U/g, M-3: 0.072 U/g, M-4: 0.084 U/g). The setback by amylograph for the control was $480.0{\pm}12.25$ Brabender Unit (B.U.) while M-4 showed the a setback of $215.0{\pm}5.00B.U.$ The absorption, mixing tolerance index, and stability by farinogram were not significantly different (P>0.05) for across all treatments. The area under the curve (135 min) by extensogram was higher than all samples. The texture profile analysis results showed that there was significant decreasing in hardness for the maltogenic amylase infused bread (P<0.05). M-3 and M-4 showed higher springiness and cohesiveness but lower hardness than control over 1 to 3 days, indicating possibly extended shelf-life. Imaging scan showed that air cell size less than $0.4mm^2$ for the control and M-4 were at rates of 94.90% and 95.70%, respectively. For sensory evaluation, M-3 and M-4 showed higher intensities than the control for taste, flavor, texture, mouthfeel, and moistness quality. These results imply that the quality of white pan bread could be improved by adding maltogenic amylase without the use of chemical additives.

• Applied Biological Chemistry
• /
• v.46 no.3
• /
• pp.201-206
• /
• 2003

An apple wine was prepared by fermentation at $25^{\circ}C$ for 2 weeks using Saccha개myces cerevisiae KCCM 12224, followed by aging at $15^{\circ}C$ for 14 weeks, and its physicochemical and microbiological changes were investigated. The viable bacterial cell numbers, increased from $1.4{\times}10^3\;CFU/ml$ at the beginning of fermentation, to $2.8{\times}10^6\;CFU/ml$ after 2 weeks, but decreased to $1.0{\times}10^5\;CFU/ml$ after aging. The viable yeast cell numbers changed from $4.3{\times}10^4\;CFU/ml$ to $1.2{\times}10^7\;CFU/ml$ during the fermentation, and decreased to $1.2{\times}10^4\;CFU/ml$ after aging. Sugar content changed from $20.0^{\circ}Brix$ to $8.5{\circ}Brix$, and reducing sugar content was changed from 9.66% to 6.44%. Alcohol content and acidity increased to 7.0% and from 0.19% to 0.24%, respectively. No changes in acidity, pH, and sugar content were observed during the aging, but reducing sugar and solid contents decreased. When apple wine was fultered through $0.45\;{\mu}m$ nitrocellulose membrane followed by various ultrafiltration membranes with different molecular weight cut-off values, the initial flux $(121.2\;liter/m^2/h)$ and the average flux of Biomax 100k membrane were the highest among the membranes used. These membrane filtration treatments resulted in complete removal of microorganisms as well as decrease in turbidity and solid content without changes in other chemical properties. No changes in the physicochemical properties of the apple wine and no microorganisms were detected during the storage at $156{\circ}C$ for 6 weeks.