• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.148-148
• /
• 2017

Surface modification is a type of mechanical manipulation skills to achieve extensive aims including corrosion control, exterior appearance, abrasion resistance, electrical insulation and electrical conductivity of substrate materials by generating a protective surface using electrical, physical and chemical treatment on the surface of parts made from metallic materials. Such surface modification includes plating, anodizing, chemical conversion treatment, painting, lining, coating and surface hardening; this study conducted cavitation experiment to assess improvement of durability using anodizing. In order to observe surface characteristics with applied current density, the electrolyte temperature, concentration was maintained at constant condition. To prevent hindrance of stable growth of oxide layer due to local temperature increase during the experiment, stirring was maintained at constant speed. In addition, using galvanostatic method, it was maintained at processing time of 40minutes for 10 to $30mA/cm^2$. The cavitation experiment was carried out with an ultra sonic vibratory apparatus using piezo-electric effect with modified ASTM-G32. The peak-to-peak amplitude was $30{\mu}m$ and the distance between the horn tip and specimen was 1mm. The specimen after the experiment was cleaned in an ultrasonic bath, dried in a vacuum oven for more than 24 hours, and weighed with an electric balance. The surface damage morphology was observed with 3D analysis microscope. As a result of the study, differences were observed surface hardness and anti-cavitation characteristics depending on the development of oxide film with the anodizing process time.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.6
• /
• pp.267-272
• /
• 2012

Considering the properties of the carbon nano tubes (CNT), their inclusion into the polymer matrix vastly increases the properties of the resultant composite. However, this is not the case due to the poor interfacial adhesion of the CNT and the polymer matrix. The present approach focuses on increasing the interaction between the polymer matrix and the CNT through the chemical modification of the CNT resulting in allyl ester functionalized carbon nanotubes (ACNT) and silane functionalized carbon nano tubes (SCNT) which are capable of reacting with the polymer matrix during the curing reaction. The addition of ACNT/SCNT into unsaturated polyester resin (UPR) resulted in the improvement of the electrical properties of resulted nanocomposites in comparison to the CNT. The surface resistivity, volume resistivity, dielectric strength, dry arc resistivity, and the comparative tracking index of the nanocomposites were significantly improved in comparison to CNT. The chemical modification of CNT was confirmed via spectroscopy.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.585-589
• /
• 2008

Second-order rate constants (kN) have been measured for reactions of Y-substituted phenyl 2-thiophenecarboxylates (6a-h) with morpholine and piperidine in 80 mol % H2O/20 mol % DMSO at 25.0 0.1 oC. The Brnsted-type plot for the reactions of 6a-h with morpholine is linear with b lg = 1.29, indicating that the reactions proceed through a tetrahedral zwitterionic intermediate (T?). On the other hand, the Brnsted-type plot for the reactions of 6a-h with piperidine exhibits a downward curvature, implying that a change in the rate-determining step occurs on changing the substituent Y in the leaving group. Dissection of kN into microscopic rate constants (i.e., k1 and k2/k1 ratio) has revealed that k1 is smaller for the reactions of 6a-h than for those of Y-substituted phenyl 2-furoates (5a-h), while the k2/k1 ratio is almost the same for the reactions of 5a-h and 6a-h. It is also reported that modification of the nonleaving group from the furoyl (5a-h) to the thiophenecarbonyl (6a-h) does not influence pKao (defined as the pKa at the center of the Brnsted curvature) as well as the k2/k1 ratio.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.415-418
• /
• 2014

Phenyltrimethoxysilane (PTMS) was anchored onto the sensitized $TiO_2$ nanoparticles. This insulating molecular layer effectively inhibited the charge recombination at the interface of $TiO_2$/electrolyte in the dye-sensitized solar cells (DSCs) without sacrificing the dye-loading capacity of the nanocrystalline $TiO_2$. DSCs using PTMS-modified $TiO_2$ exhibited a short-circuit current ($J_{SC}$) of $15.9mA/cm^2$, an open-circuit voltage ($V_{OC}$) of 789 mV, and a fill factor (FF) of 68.2%, yielding an overall conversion efficiency (${\eta}$) of 8.55% under $100mW/cm^2$ illumination. The resulting cell efficiency was improved by ~10% as compared with the reference cell.

• Animal cells and systems
• /
• v.1 no.4
• /
• pp.583-587
• /
• 1997

Incubation of an NADPH-dependent succinic semialdehyde reductase from bovine brain with N-bromosuccinimide (NBS) resulted in a time-dependent loss of enzyme activity. The inactivation followed pseudo-first-order kinetics with the second-order rate constant of $6.8\times{10}^3$ $M^-1$ $min^{-1}$. The inactivation was prevented by preincubation of the enzyme with substrate succinic semialdehyde, but not with coenzyme NADPH. There was a linear relation-ship between oxindole formation and the loss of enzyme activity. Spectro-photometric studies indicated that about one oxindole group per molecule of the enzyme was formed following complete loss of enzymatic activity. It is suggested that the catalytic function of succinic semialdehyde reductase is modulated by binding of NBS to a specific tryptophan residue at or near the substrate binding site of the enzyme.

• Molecules and Cells
• /
• v.24 no.2
• /
• pp.247-254
• /
• 2007

Improvement in the pharmacokinetic properties of short interfering RNAs (siRNAs) is a prerequisite for the therapeutic application of RNA interference technology. When injected into mice as unmodified siRNAs complexed to DOTAP/Chol-based cationic liposomes, all 12 tested siRNA duplexes caused a strong induction of cytokines including interferon ${\alpha}$, indicating that the immune activation by siRNA duplexes is independent of sequence context. When modified by various combinations of 2'-OMe, 2'-F, and phosphorothioate substitutions, introduction of as little as three 2'-OMe substitutions into the sense strand was sufficient to suppress immune activation by siRNA duplexes, whereas the same modifications were much less efficient at inhibiting the immune response of single stranded siRNAs. It is unlikely that Toll-like receptor 3 (TLR3) signaling is involved in immune stimulation by siRNA/liposome complexes since potent immune activation by ds siRNAs was induced in TLR3 knockout mice. Together, our results indicate that chemical modification of siRNA provides an effective means to avoid unwanted immune activation by therapeutic siRNAs. This improvement in the in vivo properties of siRNAs should greatly facilitate successful development of siRNA therapeutics.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.491-491
• /
• 2013

A novel plasma system has been developed for 3-dimensional modification of the carbon nano-powders. Improvement of dispersion of these nano materials are studied by plasma discharge, not using chemical modification. The plasma process is considered to great advantages over wet chemical process due to environmental, economic viewpoint, and uniformity over the treated volume. The uniform dispersion is a critical factor for these material's nano composite applications. Using this plasma system, graphene, carbon black, and CNT was treated and functionalized. Several key discharge conditions such as Ar/H2/O2 or Ar/H2/NH3 gas ratio, treatment time, power, feeder's vibration frequency are investigated. Hydrophobic of graphene has turned some more into hydrophilic by reaction test with water, electrophoresis, surface contact angle test, and turbidity analysis. The oxygen content ratio in the plasma treated CNT has increased about 3.7 times than the untreatedone. In the case of graphene and carbon black, the oxygen- and nitrogen- content has been enhanced average 10%. O-H (N-H) peak, C-O (C-N) peak, and C=O (C=N) peak data have been detected by FTIR measurement and intensified compared to before-plasma treatment due to O2 or NH3 content.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.1
• /
• pp.22-27
• /
• 2013

Detailed study on how the plasma process during the sidewall spacer formation suppresses the formation of silicide is done. In non-patterned wafer test, it is found that both fluorocarbon reactive ion etch (RIE) and TEOS plasma-enhanced deposition processes modify the Si surface so that the silicide reaction is chemically inhibited or suppressed. In order to investigate the cause of the chemical modification, we analyze the elements on the silicon surface through Auger Electron Spectroscopy (AES). From the AES result, it is found that the carbon induces chemical modification which blocks the reaction between silicon and nickel. Thus, protecting the surface from the carbon-containing plasma process prior to nickel deposition appears critical in successful silicide formation.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.9
• /
• pp.1737-1741
• /
• 2008

The electrochemical and thermal stability of $LiNi_{0.8}Co_{0.16}Al_{0.04}O_2$ were studied before and after $Co_3(PO_4)_2$ coating. Different to conventional coating material such as $ZrO_2$ or AlPO4, the coating layer was not detected clearly by TEM analysis, indicating that the $Co_3(PO_4)_2$ nanoparticles effectively reacted with surface impurities such as $Li_2CO_3$. The coated sample showed similar capacity at a low C rate condition. However, the rate capability was significantly improved by the coating effect. It is associated with a decrease of impedance after coating because impedance can act as a major barrier for overall cell performances in high C rate cycling. In the DSC profile of the charged sample, exothermic peaks were shifted to high temperatures and heat generation was reduced after coating, indicating the thermal reaction between electrode and electrolyte was sucessfully suppressed by $Co_3(PO_4)_2$ nanoparticle coating.

• BMB Reports
• /
• v.28 no.6
• /
• pp.471-476
• /
• 1995

Acetolactate synthase (ALS) catalyzes the first common step in the biosynthesis of valine, leucine, and isoleucine. ALS is the target enzyme for several classes of structually diverse herbicides. We have synthesized 4,6-dimethoxypyrimidine derivatives as ALS inhibitors, and their inhibitory activities on barley ALS were determined. $IC_{50}$ values for the derivatives are 0.2~200 ${\mu}m$. K11570, the most potent ALS inhibitor with $IC_{50}$ of 0.2 ${\mu}m$, showed mixed-type inhibition with respect to substrate pyruvate, and the progress curves for ALS inhibition by K11570 indicated that the amount of inhibition increased with time. Inhibition-competition experiments were carried out and indicated that three different classes of inhibitors, K11570, a sulfonylurea Ally, and leucine, bind to ALS in a mutually exclusive manner. Chemical modification of tryptophanyl and tyrosyl residues of ALS decreased the sensitivity of ALS to K11570, while cysteine modification did not affect the sensitivity. These results suggest that tryptophanyl and tyrosynyl residues are probably located at or near the inhibitor binding site.