• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.571-576
• /
• 2002

Electromagnetic analysis has been made for the design of 3 MJ Compulsator (Compensated Pulsed Alternator, CPA) that will be used as the power supply system of the electrothermal-chemical launcher system. using finite element method with ANSYS/Emag. From the analysis results, it was possible to decide the excitation MMF and the rotor/stator size to obtain the desired output current. And using electromagnetic forces from the analysis results. the stresses on the components of 3 MJ CPA could be analyzed. The detailed design based on the analysis results has been made and the fabrication of 3 MJ CPA is in progress. Before assembling components into 3 MJ CPA. an experiment is being made to check the correspondence between analysis results and measurements.

• Environmental and Resource Economics Review
• /
• v.12 no.1
• /
• pp.91-120
• /
• 2003

This paper is intended to measure sectoral sustainabilities and inter-industry linkage effects of natural capital depletion of the Korean industries, and to analyze sources of their change over time using the familiar input-output model. The sustainability indicator that we are measuring in this paper is based on the so-called genuine saving concept proposed by the World Bank(1997). We accommodated the concept in the extended analytical framework of Proops et al.(1999) to analyze sectoral sustainabilities of the Korean industries. We decomposed sectoral sustainabilities so measured into their composing factors based on the decomposition method devised by Chung & Rhee (2001). According to our analysis, overall sustainability of the Korean industries has been declined since 1995. In heavy and chemical, transportation, and electricity sectors, their sustainabilities has been gotten worse. Among four major factors influencing the sustainability, change in GDP was the most important followed by changes in savings, industrial structures, and demand patterns.

• International Journal of Safety
• /
• v.2 no.1
• /
• pp.45-49
• /
• 2003

In this paper, we investigated the relationship between the variables of the industrial accident factors and the manufacturing performances such as production quantity, quality, cost, and delivery. For this investigation, we collected the real data from 30 small/medium-sized manufacturing industries by performing a questionnaire survey and a on-site inter-view with the workers. Thirty industries were made up of 10 from each of the following three industries: metal processing, machinery manufacturing, and chemical products manufacturing. The data analysis was made using SPSS PC+. Based on the result of the analysis, we came to the tentative conclusion that only two variables such as work skill and load affected all four manufacturing performances and the rest of them two or three performances.

• Korean Journal of Oriental Medicine
• /
• v.10 no.1
• /
• pp.97-105
• /
• 2004

1. To define 'Korean medicine industry' through study on existing medicine related industries, Korean medicine industry means all industrial activities related to Korean medicine. It covers material resources such as herbs and products made with herbs, medical instruments, Korean medical service and related information service based on Korean medicine theories. 2. According to Korea National Statistical Office standard industrial branch, Korean medicine industry was classified as a large branch. There were industries such as agriculture, food and beverage manufacture, publishing, copy of prints and record media, manufacture of compound and chemical products, medical service, manufacture of precise optical instruments, wholesale trade and product mediation, retail trade, restaurant, research and development, education service, health preservation service, entertainment, culture and sports industry related to the Korean medicine industry. 3. If we classify this according to the industry branch of English economists Clark, Colin Grant, herb cultivating industry will be classified as primary industry, manufacture of foot and beverage related to Korean medicine, secondary industry and wholesale and retail sales of herb, research and development, education, health preservation, social welfare, tertiary industries.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.26-26
• /
• 2010

EGW process has been applied to joining of ship block with vertical-up position at high production rate. The workability of EGW, however, has been interrupted by too much slag production. Two electrodes EGW showed more severe workability than that of one electrode EGW. Therefore, to understand the effect of discharge amount of EGW slag on workability and mechanical properties, two different slag discharge amount have been controlled at the same welding conditions. The results are as follows; 1) Workability has been improved by any additional slag discharge. 2) Mechanical properties have been deteriorated with any additional slag discharge. 3) Chemical compositions of weld metal have been changed by any additional slag discharge.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.51-51
• /
• 2009

In order to understand the properties of high heat input welds made by electro gas welding, two kinds of low temperature steel were welded. Welding heat inputs were controlled by width of root gap and ranged from 118 to 143kJ/cm. Chemical composition and micro-structural analysis were performed. To understand low temperature impact properties, Charpy impact test was conducted at several temperatures. The results were summarized as follows; 1) Grain size of weld metal and heat affected zone was increased with an increase in welding heat input. 2) Impact test values at fusion line were severely fluctuated regardless of base metals, showing enormous difference among the values at the same test temperature.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.473-476
• /
• 2005

Today's manufacturing industry is facing challenges from advanced difficult-to-machine materials (WC-Co alloys, ceramics, and composites), stringent design requirements (high precision, complex shapes, and high surface quality), and machining costs. Advanced materials play an increasingly important role in modem manufacturing industries, especially, in aircraft, automobile, tool, die and mold making industries. The greatly-improved thermal, chemical, and mechanical properties of the material (such as improved strength, heat resistance, wear resistance, and corrosion resistance), while having yielded enormous economic benefits to manufacturing industries through improved product performance and product design, are making traditional machining processes unable to machine them or unable to machine them economically. In this paper, mechanical characteristic evaluation test of fine powder type WC-Co alloy was accomplished to obtain clear data for miniaturized special die parts machining with high reliability and high quality.

• IE interfaces
• /
• v.19 no.4
• /
• pp.281-290
• /
• 2006

The main objective of this study is to analyze the structure of efficiency of R&D input variables and the attributes of patent information as output of R&D activities in the major manufacturing industries (electric & electronics, machinery, chemical, textile) from the mid-1970s to the late-1990s by the development of "mapping technique". To attain this objective we first have examined the attribute of time-lag which depends on the absolute, and the cumulative values between input and output. And on the basis of this result, we have made an analysis on the impact to extract the main variables affecting patent by industries. Moreover, according to time trend of the impact variables, we have analyzed the structure of R&D efficiency, and of technological progress which will be changed with time by patent information. It has been aimed at constructing technological progress patterns in the Korea industry.

• Environmental Engineering Research
• /
• v.19 no.4
• /
• pp.299-308
• /
• 2014

This study presents a review on Chemical looping combustion (CLC) development, design aspects and modeling. The CLC is in fact an unmixed combustion based on the transfer of oxygen to the fuel by a solid oxygen carrier material avoiding the direct contact between air and fuel. The CLC process is considered as a very promising combustion technology for power plants and chemical industries due to its inherent capability of $CO_2$ capturing, which avoids extra separation costs of the of $CO_2$ from the rest of flue gases. This review covers the issues related to oxygen carrier materials. The modeling works are reviewed and different aspects of modeling are considered, as well. The main drawbacks and future research and prospects are remarked.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_1
• /
• pp.545-551
• /
• 2023

In this paper, a robot automation methodology for chemical drum assembly in semiconductor industries are presented. Robot automation is essential to resolve safety issues in which operators are directly or indirectly exposed to chemicals or fumes in assembling dispense heads on chemical drums. However, the chemical drum assembling process involves complex and difficult tasks, such as mating male/female keycodes and fastening screws with large-diameter, which may be very difficult to be performed by a single-arm robot with a commercial rigid F/T sensor. In order to solve the problems, a method for assembling a chemical drum using dual-arm collaborative robot system, compliance F/T sensor, robot vision and gripper is presented.