• 한국도로학회논문집
• /
• 제3권1호
• /
• pp.177-184
• /
• 2001

본 연구는 노후된 폐아스콘으로부터 폐아스팔트를 추출하여 ASTM방법을 이용해서 폐아스팔트의 화학적 조성을 성분별로 분리하고, 이들을 신제아스팔트의 구성성분과 비교하여 노후시 변화하는 성분들을 파악하였다. 이러한 분석결과를 토대로 폐아스팔트의 성상복원을 위한 재생첨가제를 제조하여 재생첨가제를 10%, 20% 첨가했을 때 폐아스팔트의 복원정도를 침입도$(25^{\circ}C)$, 신도, 연화점, 점도의 네 가지 시험을 수행하여 폐아스팔트의 물성 변화 특성을 고찰하였다. 연구결과에 의하면 아스팔트의 노화시 아스팔텐의 함량이 하고, 방향족성분의 함량이 감소함을 알 수 있었고, 증가한 아스팔텐의 함량을 줄여주기 위해 아스팔트의 방향족 성분자 화학적으로 비슷한 아로마틱기유를 사용하여 재생첨가제를 제조했다. 그리고 제조된 재생첨가제를 노화가 진행된 폐아스팔트에 무게 비로 20% 첨가했을 때, 신제아스팔트 (AP-3)와 유사한 정도로 성상이 복원됨을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2727-2730
• /
• 2010

• Journal of Electrochemical Science and Technology
• /
• 제6권2호
• /
• pp.35-49
• /
• 2015

Advanced polymeric binders with unique functions such as improvements in the electronic conduction network, mechanical adhesion, and mechanical durability during cycling have recently gained an increasing amount of attention as a promising means of creating high-performance silicon (Si) anodes in lithium-ion batteries with high energy density levels. In this review, we describe the key challenges of Si anodes, particularly highlighting the recent progress in the area of polymeric binders for Si anodes in cells.

• 반도체디스플레이기술학회지
• /
• 제8권3호
• /
• pp.25-30
• /
• 2009

In this study, we synthesized novel UV-curable binders and applied for negative photoresist of display device. First, we synthesized UV-curable binders by radical polymerization with a mixture of Styrene/Methyl methacrylate/Methacrylic acid/Glycidyl methacrylate/N-Cyclohexylmaleimide at a fixed composition. Following the first step, we prepared a negative photoresist mixture optimized with photo sensitive initiator and others for the litho test. And then, we studied resolution and film retention with molecular weight of each binders and numerical value of Alkaline Desolution Rate(ADR). As a result of the litho test, we found that if the novel polymers have same numerical value of ADR, the resolution decreased and the film retention increased with the increasing of molecular weight of photoresist binder.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권10호
• /
• pp.1484-1489
• /
• 2006

This study was carried out to investigate the effect of high pressure and the addition of non-meat proteins on the physico-chemical and binding properties of restructured pork. Pressurizations were carried out at up to 200 MPa and non-meat proteins used as a binder were isolated soy protein (ISP), sodium caseinate (SC), whey protein concentrate (WPC) and egg white powder (EWP). The pH values of all treatments were affected by the level of pressure. $L^*$-value of all treatments increased significantly (p<0.05), while both $a^*$-value and $b^*$-value of all treatments showed a significant decrease (p<0.05) with increasing pressure level. Binders could contribute only additive effects on both pH and color of the treatments. It was found that high pressure improved the water binding capacities and binding strength of the treatments. Binders also improved the binding strength of restructured pork. However, SC and WPC had no effect on water binding properties under high pressure. These results indicate that the application of high pressure had more significant effect on restructuring meat than binders.

• 공업화학
• /
• 제20권5호
• /
• pp.561-564
• /
• 2009

화학적 바인더를 사용하여 활성탄을 고정화시킨 필터 여재(filter media)와 바인더를 사용하지 않고 니들펀치 공정으로 제조한 필터여재를 비교해 보았다. 제조된 콤비네이션 필터는 실차의 내용적과 비슷한 크기의 챔버 내부의 차량용 송풍기에 장착하여 가스제거 효과를 평가하여 보았다. 화학적 바인더를 사용한 캐빈에어필터는 바인더에 의해 활성탄의 흡착기공이 막혀 아세트알데히드 제거 효과가 감소하리라는 예측과 반대로 니들펀칭 공정으로 제조한 필터에 비해 아세트알데히드 1 min 및 30 min 제거효율이 더 높게 나타났다. 니들펀칭 공정에 따르면 활성탄의 소수성결합력(hydrophobic interaction)으로 인해 화학적 바인더를 사용한 캐빈에어필터보다 공극면적(void area)이 상대적으로 더 넓은 것으로 나타났다.

• 한국건설순환자원학회지
• /
• 제10권1호
• /
• pp.21-26
• /
• 2015

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.60.1-60.1
• /
• 2010

Chemically functionalized plant oils such as acrylated epoxidized soybean oil (AESO) and maleinized acrylated epoxidized soybean oil (MAESO) were used as new bio-based binders for $TiO_2$ electrodes of dye-sensitized solar cells (DSSC). More porous networks and larger porosities were fabricated on the $TiO_2$ films using plant oil binders due to the larger number of functionalities, in comparison with the film using polyethylene glycol (PEG). The charge-transfer resistance in the $TiO_2$ films was considerably shrunk due to the reduced impurity states. The short circuit photocurrent (Isc) and the open circuit photovoltage (Voc) of the cell using plant oil binders increased and the conversion efficiency improved significantly.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제2권1호
• /
• pp.9-19
• /
• 1998

A laboratory study was conducted to investigate the immobilization of the laboratory waste sludge, mainly from chemical oxygen demand (COD) waste, using cementitious binders. The binders were: Ordinary Portland Cement (OPC), and lime-Rice Husk Ash(RHA) cement. The economic evaluation was done for three different kinds of cementitious binders, namely, OPC, Portalnd Rice Husk Ash Cement (PRHAC) which contained rice husk ash 50 percent by dry weight, and lime-RHA cement. The result showed that lime-RHA cement was the cheapest. The applicability of Freundlich's desorption isotherm was studied to assess the teachability of sludges. The teachability of cement mortars was found to follow the desorption isotherms. Therefore, it was concluded that based on this test, the leachate concentrations of the solidified heavy metals could be predicted, approximately by the Freundlich's isotherm desorption modeling.

• 한국환경과학회지
• /
• 제2권1호
• /
• pp.9.2-19
• /
• 1993

A laboratory study was conducted to investigate the immobilization of the laboratory waste sludge, mainly from chemical oxygen demand (COD) waste, using cementitious binders. The binders were: Ordinary Portland Cement (OPC), and lime-Rice Husk Ash (RHA) cement. The economic evaluation was done for three different kinds of cementitious binders, namely, OPC, Portaind Rice Husk Ash Cement (PRHAC) which contained rice husk ash U percent by dry weight, and lime-RHA cement. The result showed that lime-RHA cement was the cheapest. The applicability of Freundlich's desorption isotherm was studied to assess the teachability of sludges. The teachability of cement mortars was found to follow the desorption isotherms. Therefore, it was concluded that based on this test, the leachate concentrations of the solidified heavy metals could be predicted, approximately by the Freundlich's isotherm desorption modeling.