• Korean Journal of Environmental Agriculture
• /
• v.7 no.1
• /
• pp.34-42
• /
• 1988

To investigate the effects of paper sludge on seasonal variations of volatile lower fatty acids in paddy soil, paper sludge was applied to pots at the rate of either 300, 600, 900 or 1,200 kg/l0a which was either preadjusted at a C/N ratio of 30 : 1 or not adjusted. The decomposition rate of paper sludge, the evolution of $CO_2$, and the fractions of volatile lower fatty acids in the soil were determined. The results are summarized as follows: 1. Paper sludge was decomposed to $35{\sim}44%$, and its C/N ratio was $55{\sim}82$, respectively, at 120 days after treatment. 2. The evolution of $CO_2$, in the soil was proportional to the amount of paper sludge added. Significant positive correlations were observed the $CO_2$ evolution was compared with the decomposition rate of paper sludge, and volatile fatty acid contents in soil. 3. Acetic, propionic, butyric, i-butyric, valeric and i-valeric acids were identified in all the soils investigated. The content of the total volatile fatty acids in the soil increased with as the application of paper sludge increased. The formation of the acids was the highest at 25 days after treatment, and thereafter the contents of the acids decreased as time elapsed. 4. The volatile fatty acids in the soil inhibited the growth of paddy rice in early stages. The contents of acetic, propionic and i-valeric acids in the soil negatively, correlated with the uptake of N, $P_2O_5$, $K_2O$, CaO, MgO and $SiO_2$ in the paddy rice at 25 days after transplantation. In addition, the uptake of $P_2O_5$ and CaO in the paddy rice negatively correlated with the content of butyric acid in the soil. 5. The content of total volatile fatty acids positively correlated with the content of $Fe^{++}$ and $Mn^{++}$ in the soil at 25 days after transplantation. A significantly positive correlation was observed between $Fe^{++}$ and acetic acid contents in the soil.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.4
• /
• pp.220-227
• /
• 2004

This study showed that thermophilic anaerobic acid fermentation of food wastes had an enhanced hydrolysis capability and improvement of acidification efficiency. Influence of pH on the anaerobic hydrolysis and acidogenesis was investigated to determine the proper alkalinity in the thermophilic fermentation of food wastes. The results of putting NaOH as alkali to evaluate hydrolysis and acid fermentation efficiency In acid fermentation process of food wastes showed that the food wastes pretreated with 0.05 g NaOH/g TS had the maximum 12,600 mg/L of VFAs concentration during HRT 3 days in $55^{\circ}C$ thermophilic condition and the maximum 9,700 mg/L of VFAs concentration during HRT 5 days in $35^{\circ}C$ mesophilic condition. The accomplishment of high VFAs concentration resulted from that the main component of food wastes such as cellulose, lignin and etc. is performed active chemical decomposition by alkali in thermophilic condition. The major components of VFAs produced from the thermophilic acid fermentation process of food wastes were the short chain fatty acids such as acetic acid, butyric acid, and propionic acid.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.3
• /
• pp.53-59
• /
• 2001

There is a lot of method to manage the insanitary landfill but vertical cutoff walls have been widespreadly used and were installed into the subsurface to act as a barrier to horizontal groundwater flow, The stabilized material such as specialized cement or mixed soil with additives has been generally applied for the materials of the deep soil mixing barrier in korea. The amount of the stabilized material is dependent on the field conditions, because the mixing ratio of the material and the field soil should achieve a requirement in the coefficient of permeability, lower than 1.0$\times$$10^{7}$cm/sec. This study determined the quantity and optimized function ratio of the stabilized material in the formation process of the mixed barrier that was added with stabilized material on the field soil classified into SW-SC under USCS (Unified Soil Classification System). After that the fly ash and lime were selected as an additives an that could improve the function of the stabilized material and then the method to improve the functional progress in the usage of putting into the stabilized material as an appropriate ratio was studied and reviewed. The author used the flexible-wall permeameter for measuring the permeability and unconfined compressive strength tester for compressive strength, and in the view of environmental engineering the absorption test of heavy metals and leaching test regulated by Korean Waste Management Act were performed. As the results, the suitable mixing ratio of the stabilized material in the deep soil mixing barrier was determined as 13 percent. To make workability easy, the ratio of stabilized material and water was proven to be 1 : 1.5. With the results, the range of the portion of the additives(fly ash : lime= 70 : 30) was proven to be 20-40% for improving the function of the stabilized material, lowering of permeability. In heavy metal absorption assessment of the mixing barrier system with the additives, the result of heavy metal absorption was proved to be almost same with the case of the original stabilized material; high removal efficiency of heavy metals. In addition, the leaching concentration of heavy metals from the leaching test for the environmental hazard assessment showed lower than the regulated criteria.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.2
• /
• pp.222-241
• /
• 2020

The Taereung Royal Tomb from the Joseon Dynasty is the tomb of Empress Munjeong, the second queen of King Jungjong, and it contains various types of stone artifacts. All of these stone artifacts were constructed using coarse- to medium-grained biotite granite. The major types of deterioration of the stone artifacts are identified as surface weathering and biological contaminants. Exfoliation (145 sculptures), granular decomposition (138 sculptures), and repair materials (156 sculptures), along with biological contaminant algae (154 sculptures), lichen (165 sculptures) and moss (97 sculptures), have a high occurrence frequency. In particular, it is deemed that immediate conservation treatment is required, as biological deterioration (algae) represents the most serious condition (grade 3 or higher in 94% of all stones), and it is thought that exfoliation and granulation decomposition are required for long-term conservation management. As a result of equo -tip hardness and ultrasonic measurement, more than 70% of stones were found to have very weak physical properties. Through hyperspectral analysis, organisms were shown to inhabit more than 80% of the surface of burial mound stone artifacts, and P (phosphorus), S (sulfur), Cl (chlorine), and Ca (calcium) were detected in this area. This is because Taereung Royal Tomb has been exposed to the outdoors for hundreds of years and has been weathered by physical, chemical, and biological factors. Therefore, among the stone artifacts in the Taereung Royal Tomb, those with high physical weathering grades are considered to require consolidation to reinforce them physically. Since organisms are highly likely to cause stone damage, they must be removed via dry and wet cleaning. In addition, in order to delay the reoccurrence of organisms following conservation treatment, it is necessary to regularly clean up the soil that has flowed into the burial mound, and to monitor conservation conditions over the long term.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.5
• /
• pp.274-280
• /
• 2005

Enormous amount of oyster-shell waste has been illegally disposed at oyster farm sites along the southern coast of Korea and then made a serious problem in environmental side. To increase the consumption of oyster shell meal as a soil amendment, the effects of oyster shell meal on soil properties and spring Chinese cabbage productivity were evaluated in silt loam soil to which 0, 4, 8, 12 and $16Mg\;ha^{-1}$ of oyster-shell meal fertilizer were added. Hydrated lime treatment ($2Mg\;ha^{-1}$) was selected as a control. Oyster-shell meal fertilizer, which made by a simple crushing and has high alkalinity as a calcium materials, had significant effects on neutralizing acid soil and on supplying calcium element. Spring Chinese cabbage yields increased with shell meal application. Plant uptakes of macro-nutrients such as P and C, and micro-nutrient such as B were significantly increased by oyster-shell meal application and then contributed to promote Chinese cabbage growth. The highest yield was achieved following the addition of $8Mg\;ha^{-1}$ shell meal application, and the same yield with that in lime treatment was at the $4Mg\;ha^{-1}$. Oyster-shell meal had more substantial effect on suppling calcium and on improving soil pH than that of lime. In conclusion, oyster shell meal fertilizer could be a good supplement to other inorganic soil amendments to improve nutrient balances in upland soils.

• Korean Journal of Food Science and Technology
• /
• v.50 no.1
• /
• pp.117-121
• /
• 2018

Puffing process modifies the chemical and physical properties of the grains. In this study, oats were puffed by subjecting them to pressure of 1.0 and 1.2 MPa, following which the bioactive constituents and antioxidant activities in the oat extracts were investigated. The polyphenol content in puffed oat extracts increased in a pressure-dependent manner (109 and 157 mg gallic acid equivalent/100 g at 1.0 and 1.2 MPa, respectively). In addition, gallic acid was synthesized after puffing ($518{\mu}g/g$ of extract at 1.0 MPa) and was the most abundant phenolic acid in puffed oats. The antioxidant activities, which were determined by 1, 1-diphenyl-2-picrylhydrazyl (DPPH) and 2, 2-azino-bis-3-ethylbenzothiazoline-6-sulphonic acid (ABTS) radical scavenging activities, were improved in oat extracts after puffing (+245 and +184% at 1.2 MPa, respectively). In conclusion, puffing process of oats increased the extractability of polyphenols, including gallic acid, which positively affected its antioxidant activities. These results will provide useful information when using puffed oats for food production.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.65-79
• /
• 2019

The study attempted to estimate the optimal facility capacity by combining renewable energy sources that can be connected with gas CHP in industrial complexes. In particular, we reviewed industrial complexes subject to energy use plan from 2013 to 2016. Although the regional designation was excluded, Sejong industrial complex, which has a fuel usage of 38 thousand TOE annually and a high heat density of $92.6Gcal/km^2{\cdot}h$, was selected for research. And we analyzed the optimal operation model of CHP Hybrid System linking fuel cell and photovoltaic power generation using HOMER Pro, a renewable energy hybrid system economic analysis program. In addition, in order to improve the reliability of the research by analyzing not only the heat demand but also the heat demand patterns for the dominant sectors in the thermal energy, the main supply energy source of CHP, the economic benefits were added to compare the relative benefits. As a result, the total indirect heat demand of Sejong industrial complex under construction was 378,282 Gcal per year, of which paper industry accounted for 77.7%, which is 293,754 Gcal per year. For the entire industrial complex indirect heat demand, a single CHP has an optimal capacity of 30,000 kW. In this case, CHP shares 275,707 Gcal and 72.8% of heat production, while peak load boiler PLB shares 103,240 Gcal and 27.2%. In the CHP, fuel cell, and photovoltaic combinations, the optimum capacity is 30,000 kW, 5,000 kW, and 1,980 kW, respectively. At this time, CHP shared 275,940 Gcal, 72.8%, fuel cell 12,390 Gcal, 3.3%, and PLB 90,620 Gcal, 23.9%. The CHP capacity was not reduced because an uneconomical alternative was found that required excessive operation of the PLB for insufficient heat production resulting from the CHP capacity reduction. On the other hand, in terms of indirect heat demand for the paper industry, which is the dominant industry, the optimal capacity of CHP, fuel cell, and photovoltaic combination is 25,000 kW, 5,000 kW, and 2,000 kW. The heat production was analyzed to be CHP 225,053 Gcal, 76.5%, fuel cell 11,215 Gcal, 3.8%, PLB 58,012 Gcal, 19.7%. However, the economic analysis results of the current electricity market and gas market confirm that the return on investment is impossible. However, we confirmed that the CHP Hybrid System, which combines CHP, fuel cell, and solar power, can improve management conditions of about KRW 9.3 billion annually for a single CHP system.

• Clean Technology
• /
• v.27 no.4
• /
• pp.341-349
• /
• 2021

In combustion facilities, the nitrogen and sulfur in fossil fuels react with oxygen to generate air pollutants such as nitrogen oxides (NO_X) and sulfur oxides (SO_X), which are harmful to the human body and cause environmental pollution. There are regulations worldwide to reduce NO_X and SO_X, and various technologies are being applied to meet these regulations. There are commercialized methods to reduce NO_X and SO_X emissions such as selective catalytic reduction (SCR), selective non-catalytic reduction (SNCR) and wet flue gas desulfurization (WFGD), but due to the disadvantages of these methods, many studies have been conducted to simultaneously remove NO_X and SO_X. However, even in the NO_X and SO_X simultaneous removal methods, there are problems with wastewater generation due to oxidants and absorbents, costs incurred due to the use of catalysts and electrolysis to activate specific oxidants, and the harmfulness of gas oxidants themselves. Therefore, in this research, microbubbles generated in a high-pressure disperser and reducing agents were used to reduce costs and facilitate wastewater treatment in order to compensate for the shortcomings of the NO_X, SO_X simultaneous treatment method. It was confirmed through image processing and ESR (electron spin resonance) analysis that the disperser generates real microbubbles. NO_X and SO_X removal tests according to temperature were also conducted using only microbubbles. In addition, the removal efficiencies of NO_X and SO_X are about 75% and 99% using a reducing agent and microbubbles to reduce wastewater. When a small amount of oxidizing agent was added to this microbubble system, both NO_X and SO_X removal rates achieved 99% or more. Based on these findings, it is expected that this suggested method will contribute to solving the cost and environmental problems associated with the wet oxidation removal method.

• Journal of Mushroom
• /
• v.19 no.3
• /
• pp.166-175
• /
• 2021

In this study, monokaryons of "Heukari" (Pleurotus ostreatus) and "Hosan" (Pleurotus pulmonarius) were separated to remove the cell wall, and a cross-species protoplast fusion was developed through chemical treatment with polyethylene glycol. The protoplast-fused PF160306 and PF160313 strains have a culture period of 10 and 2 days shorter than that of the "Heuktari" and "Hosan" cultivars, respectively. Furthermore, the growth of the strains was faster than that of the existing cultivars. The yield was 135.9 g per bottle, which was approximately 8% higher than that of the commercially available "Hosan" cultivar; however, it was not statistically significant. A growth survey was conducted after treatment at five temperatures (15, 18, 21, 23, and 25℃). The growth of the strains accelerated with the increase in temperature. However, at 21℃, the yellow color of pileus was the brightest. Band pattern, assessed using URP Primer 7, was similar to that of the "Hosan" cultivar. The DPPH radical scavenging capacity and polyphenol content were 62.5% and 43.5 mg/mL, respectively, for "Sunjung" and 65.7% and 49.9 mg/mL, respectively, for PF160313. Furthermore, the antihypertensive activities of the "Sunjung" cultivar and PF160313 were similarly high at 74% and 75%, respectively. In conclusion, cross-species hybridization via the protoplast fusion technique can be used for obtaining primary data for mushroom breeding to develop new varieties. In addition, the protoplast fusion technique might aid in expanding the market for yellow mushrooms.

• Clean Technology
• /
• v.27 no.4
• /
• pp.332-340
• /
• 2021

With the recent reinforcement of emission standards, it is necessary to make efforts to reduce NOx from air pollutant-emitting workplaces. The NOx reduction method mainly used in industrial facilities is selective catalytic reduction (SCR), and the most commercial SCR catalyst is the ceramic honeycomb catalyst. This study was carried out to reduce the NOx emitted from steel plants by applying De-NOx catalyst coated on metallic monolith. The De-NOx catalyst was synthesized through the optimized coating technique, and the coated catalyst was uniformly and strongly adhered onto the surface of the metallic monolith according to the air jet erosion and bending test. Due to the good thermal conductivity of metallic monolith, the De-NOx catalyst coated on metallic monolith showed good De-NOx efficiency at low temperatures (200 ~ 250 ℃). In addition, the optimal amount of catalyst coating on the metallic monolith surface was confirmed for the design of an economical catalyst. Based on these results, the De-NOx catalyst of commercial grade size was tested in a semi-pilot De-NOx performance facility under a simulated gas similar to the exhaust gas emitted from a steel plant. Even at a low temperature (200 ℃), it showed excellent performance satisfying the emission standard (less than 60 ppm). Therefore, the De-NOx catalyst coated metallic monolith has good physical and chemical properties and showed a good De-NOx efficiency even with the minimum amount of catalyst. Additionally, it was possible to compact and downsize the SCR reactor through the application of a high-density cell. Therefore, we suggest that the proposed De-NOx catalyst coated metallic monolith may be a good alternative De-NOx catalyst for industrial uses such as steel plants, thermal power plants, incineration plants ships, and construction machinery.