• Bulletin of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.374-379
• /
• 1997

The rate constants for the nucleophilic addition of thiophenol derivatives (p-OCH3, H, p-CH3, m-CH3, p-Br and p-NO2) to 4'-[N-(9-acridinyl)]-1'-(N-methanesulfonyl)-3'-methoxyquinonediimide (AMQD) were determined by ultraviolet spectrophotometer in water at 5 ℃, and rate equations which can be applied over a wide pH range were obtained. On the basis of pH-rate profile, Bronsted plot, adduct analysis, general base catalysis and substituent effect, a plausible mechanism of this addition reaction was proposed: Below pH 2.5, the reaction proceeded by the addition of thiophenol molecule to 6'-position of quinonoid after protonation at the acridinyl nitrogen. Above pH 6.2, the addition of sulfide anion to 6'-position of quinonoid was rate controlling. However, in the range of pH 3.0-6.0, these two reactions occured competively.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.3
• /
• pp.301-303
• /
• 1991

The rate constants for the nucleophilic addition of thiophenol to $\alpha$, N-diphenylnitrone and it's derivatives (p-$OCH_3$, p-Cl, p-$NO_2$) were determined from pH 3.0 to 13.0 by UV spectrophotometry and rate equations which can be applied over a wide pH range were obtained. On the basis of rate equation, general base and substituent effect a plausible addition mechanism of thiophenol to ${\alpha}$, N-diphenylnitrone was proposed: At high pH, the addition of sulfide ion to carbon-nitrogen double bond was rate controlling, however, in acidic solution, reaction was proceeded by the addition of thiophenol molecule to carbon-nitrogen double bond after protonation at oxygen of ${\alpha}$, N-diphenylnitrone.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.435-440
• /
• 2018

Nyamplung (Calophyllum inophyllum Linn) is one of the most widely grown plants in Indonesia. In addition, nyamplung oil has a future competitive advantage in that it can be processed into biodiesel. However, conventional methods for transesterification of nyamplung oil have been less effective. Therefore, in this study biodiesel was produced using microwaves as one of the alternative methods that can improve the shortcomings of conventional methods. In addition, optimization of parameters such as microwave power, catalyst concentration and transesterification time was done using Box-Behnken design. The combination of microwave with CaO catalyst and treated with Box-Behnken design are considered as a new and modern method for production of biodiesel from nyamplung oil and optimizing the factors that affected the transesterification process. The results showed that factors such as microwave power of 449.29 W, concentration of catalyst of 4.86% and transesterification time of 10.07 min can produce optimal yield of biodiesel of 92.73% with reliability of 93.22%.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.163-170
• /
• 2016

In order to improve the hydrophilic property of polymer films, coating solutions which showed a good hydrophilic property, were prepared by the sol-gel method. The coating solutions were prepared by adding different types of silane coupling agents (aminosilane, epoxysilane and acrylsilane) to a colloidal silica (15 nm diameter). The solutions prepared by adding aminosilane resulted in gels which could not be used as coating solutions. On the other hand, the coating solutions prepared by the addition of epoxysilane showed contact angles of $10{\sim}15^{\circ}$ and good hydrophilic property at R=0.10~0.15 (R=silane coupling agent/colloidal silica weight ratio). In addition, the coating solutions prepared by the addition of acrylsilane at R=0.03~0.07, exhibited contact angles of $5{\sim}10^{\circ}$, which means better hydrophilic property than aminosilane or epoxysilane.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.3
• /
• pp.450-458
• /
• 2006

The present study was carried out to investigate the changes in chemical and sensory properties, and cholesterol lowering effect of evening primrose oil (EPO) addition in cholesterol-reduced Cheddar cheese. The cholesterol removal rate reached 92.07% by ${\beta}$-cyclodextrin in the cheese before EPO addition. The thiobarbituric acid (TBA) value of cholesterol-reduced and EPO-added cheese increased with both ripening time and amount of EPO addition. Addition of 5% EPO resulted in a significant difference in TBA value after 4-week ripening, compared with no addition of EPO. The production of short-chain free fatty acids (FFAs) increased with ripening period in all treatments. From 4 week of ripening, the amounts of short-chain FFA in 3 and 5% EPO-added groups were significantly higher than those in other groups. Among sensory characteristics, rancidity was mostly affected by EPO addition, however, the rancidity value of 1% EPO-added was not significantly different from that of EPO-free and cholesterol-reduced cheese. Also, Cheddar cheese flavor was not profoundly affected by 1% EPO addition in all ripening periods. Total blood cholesterol dramatically decreased from 184.0 to 137.1 mg/dL with 5% EPO-added and cholesterol-reduced cheese following 8 weeks of feeding. The present results indicated that 5% EPO addition resulted in a profound lowering effect on blood total cholesterol with some adverse effects on chemical and sensory properties.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.6
• /
• pp.441-448
• /
• 2000

Experimental work was carried out on nitrogen and phosphorus removal from real wastewater using a bench-scale SBR process. The phosphorus removal was stable and the phosphorus concentration remaining in the reactor was maintained within 1.5ppm, regardless of the addition of an external carbon source. In the case of nitrogen, an external carbon source was necessary for denitrification. The effect on denitrification with the addition of various carbon sources, such as glucose, methanol, acetate, and propionate, was also investigated. Acetate was found to be the most effective among those tested in this study. When 100ppm (theoretical oxygen demand) of sodium acetate was added, the average rate of denitrifiaction was 2.73mg NO$_3$-N (g MLSS)(sup)-1 h(sup)-1, which was ca. 4 times higher than that with the addition of 200 ppm of methanol. The phosphorus and nitrogen concentrations were both maintained within 1.5ppm by the addition of an appropriate amount of a carbon source during a long-term operation of the SBR. The mathematical modeling was performed using Monod kinetics, other microbial kinetics, mass balances, and stoichiometry. The modeling was found to be useful for predicting the SBR operation and optimizing the HRT.

• Macromolecular Research
• /
• v.15 no.4
• /
• pp.308-314
• /
• 2007

The effects of a compatibilizer on polypropylene (PP)/poly(acrylonitrile-butadiene-styrene) (ABS) blends were studied. Blends of the PP/ABS, with PP-g-SAN copolymer as a compatibilizer, were prepared using a twin screw extruder. The flexural and impact strength of the PP/ABS blends with the PP-g-SAN copolymer increased significantly with PP-rich compositions on the addition of the PP-g-SAN copolymer at 3 phr. The increase in the mechanical properties of the PP/ABS/PP-g-SAN blend may have been due to the toughening effects of the ABS in the PP-rich compositions. In the morphology study of the PP/ABS/PP-g-SAN (80/20) blend with the PP-g-SAN copolymer, the minimum droplet size, $5.1{\mu}m$, was observed with the addition on phr of the PP-g-SAN copolymer. The complex viscosity of the PP/ABS/PP-g-SAN (80/20) blends increased with the addition of3 phr of the PP-g-SAN copolymer. From the above mechanical properties, morphology and complex viscosity results for the PP/ABS blends, it is suggested that the compatibility is more increased with the PP-rich composition (PP:ABS=80/20 wt%) of the PP/ABS blend on the addition of 3 phr of the PP-g-SAN copolymer.

• Korean Journal of Materials Research
• /
• v.30 no.1
• /
• pp.31-37
• /
• 2020

In this study, the effects of Sm addition (0, 0.05, 0.2, 0.5 wt%) on the microstructure, hardness, and electrical and thermal conductivity of Al-11Si-1.5Cu aluminum alloy were investigated. As a result of Sm addition, increment in the amount of α-Al and refinement of primary Si from 70 to 10 ㎛ were observed due to eutectic temperature depression. On the other hand, Sm was less effective at refining eutectic Si because of insufficient addition. The phase analysis results indicated that Sm-rich intermetallic phases such as Al-Fe-Mg-Si and Al-Si-Cu formed and led to decrements in the amount of primary Si and eutectic Si. These microstructure changes affected not only the hardness but also the electrical and thermal conductivity. When 0.5 wt% Sm was added to the alloy, hardness increased from 84.4 to 91.3 Hv, and electric conductivity increased from 15.14 to 16.97 MS/m. Thermal conductivity greatly increased from 133 to 157 W/m·K.

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.720-725
• /
• 2011

Gold catalysts supported on metal-oxides were prepared by co-precipitation using the various metal nitrates and chloroauric acid as precursors, and effect of water addition on the catalytic activity in CO oxidation was investigated. Among the various supported gold catalysts, Au/$Co_{3}O_{4}$ and Au/ZnO catalysts showed the excellent activity for CO oxidation. Water in the reactant gas had a negative effect on the oxidation activity over Au/$Co_{3}O_{4}$ catalysts and a positive effect on that over Au/ZnO, which means the activity depends strongly on the nature of support. It was also confirmed that no significant change in the particle size of gold was observed after reaction both in dry and wet conditions. This fact suggested that the deactivated catalyst due to a carbonate species could be regenerated by water addition in the reactant gas.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.1
• /
• pp.93-97
• /
• 2002

Poly(ethylene glycol)-phosphatidylethanolamine conjugate (PEG-PE) has been used in preparing longcirculating liposomes. As a substitute for PEG-PE which can also be used in the long-circulating liposome formualtions, but can be prepared more readily with a lower cost, PEG-Phe-Chol was synthesized from PEG, phenylalanine, and cholesterol. The addition of the PEG derivative to distearoylphosphatidylcholine (DSPC) led to the formation of mixed micelles as well as liposomes when the derivative content was 10 mol% or greater. On the other hand, the addition of just 5 mol% PEG-Phe-Chol to dioleoylphosphatidylethanolamine (DOPE) generated mixed micelles as well as liposomes, but the formation of mixed micelles was completely inhibited by the addition of cholesterol. The leakage of entrapped calcein out of DOPE/cholesterol (7/3) liposomes containing 5 mol% PEG-Phe-Chol was about 45% during the incubation time for 24 h in 50% rabbit plasma, which was similar to that of the same liposomes containing 5 mol% PEG-dipalmitoylphosphatidylethanolamine (DPPE) under the identical conditions.