• Restorative Dentistry and Endodontics
• /
• v.46 no.1
• /
• pp.11.1-11.11
• /
• 2021

Objectives: The aim of this study was to compare smear layer removal by conventional application (CA), passive ultrasonic irrigation (PUI), EasyClean (EC), and XP-Endo Finisher (XPF), using 17% ethylenediaminetetraacetic acid (EDTA) after chemomechanical preparation, as evaluated with scanning electron microscopy (SEM). Materials and Methods: Forty-five single-rooted human mandibular premolars were selected for this study. After chemomechanical preparation, the teeth were randomly divided into 5 groups according to the protocol for smear layer removal, as follows: G1 (control): CA of distilled water; G2 (CA): CA of 17% EDTA; G3 (PUI): 17% EDTA activated by PUI; G4 (EC): 17% EDTA activated by EC; and G5 (XPF): 17% EDTA activated by XPF. SEM images (×1,000) were obtained from each root third and scored by 3 examiners. Data were evaluated using the Kruskal-Wallis and Dunn tests (p < 0.05). Results: In the apical third, there were no statistically significant differences among the groups (p > 0.05). In the cervical and middle thirds, the experimental groups performed better than the control group (p < 0.05); however, G2 presented better results than G3, G4, and G5 (p < 0.05), which showed no differences among one another (p > 0.05). Conclusions: No irrigation method was able to completely remove the smear layer, especially in the apical third. Using CA for the chelating solution performed better than any form of activation.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.12
• /
• pp.1409-1412
• /
• 1999

The spectrophotometric determination method of scandium with eriochrome cyanine R (ECR) and the composition ratio of the complex were investigated in the presence of surfactants. A volume of 5 mL of 1.0×$10^{-3}$ M ECR and 10 mL of 2.0×$10^{-4}$ M CTMAB are necessary for the determination of 1.0×$10 ^{-7}$ ~ 3.0×$10^{-6}$ M Sc(III) at pH 6.5. The apparent molar absorption coefficient of the Sc(III)-ECR-CTMAB, ternary complex at 610 nm is 5.6×$10^5$ $mol^{-1}cm{-1}$L and its detection limit is 1.0×$10^{-7}$ M. Separation studies were conducted by the column method. The effect of pH, elution solution and the influence of rare earth elements as interferents was discussed. Their separation was carried out in 0.1 M HCl-50% methanol solution and 1.0 M HCl media. The method was applied for the determination of Sc(III) in monazite.

• Fashion & Textile Research Journal
• /
• v.8 no.4
• /
• pp.458-464
• /
• 2006

The adsorption ability of heavy metal ions from the aqueous solution by chitosan, which it is well known natural biopolymer, has been investigated. The fundamental study in this research is focusing on the physicochemical adsorption utilizing the chitosan as a organic chelating adsorbent, adsorb especially heavy metal ions from the waste liquid solution. The adsorption ability of the chitosan between metal ions, having different characteristics with Mw of 188,600, 297,200, and 504,200 g/mol and degree of deacetylation (DD) of 86.92% and 100% were investigated targeting on the $Ni^{2+}$, $Co^{2+}$, $Zn^{2+}$, and $Pb^{2+}$ ions, respectively. The uptake of heavy metal ions with chitosan was performed by atomic absorption flame emission spectrophotometer (AAS) as conducted residual metal ions. It was found that chitosan has an strong adsorption capacity for some metals under certain conditions. Chitosan, which have 100% degree of deacetylation showed high adsorption recovery ratio and have an affinity for all kinds of heavy metals. In contrast, the molecular weight of chitosan was not completely affected on metal ion adsorption.

• Journal of Environmental Science International
• /
• v.13 no.4
• /
• pp.435-440
• /
• 2004

The thiophene or furan-containing hexadentate ligands 1, 12-bis (2-theophene )-2,5,8,ll-tetraazadodecane(Thiotrien ㆍ 4HCl) and 1,12-bis (2-furan)-2,5,8,11-tetraazadodecane(Furatrienㆍ4HC1) were synthesized as their tetrahydrochloride salt and characterized by EA, IR, NMR, and Mass spectrum. Their protonation constants (logK$_{nH}$) and stability constants (logK$^{M}_{L}$ for Cd$^{2+}$, Pb$^{2+}$, $Zn^{2+}$ and Cu$^{2+}$ ions were determined in aqueous solution by potentiometry and compared with 1, 12-bis(2-pyridyl)-2,5,8, 11-tetra-azadodecane(Pytrien) of pyridyl-containing ligand. The effect stability constants of ligands and metal ion for removal of heavy metals in aqueous solution were described.

• Analytical Science and Technology
• /
• v.9 no.3
• /
• pp.279-291
• /
• 1996

The new chelating resins, XAD-2, 4, 16-TAC and XAD-2, 4, 16-TAO were synthesized by Amberlite XAD-2, XAD-4, and XAD-16 macroreticular resins with 2-(2-thiazolylazo)-p-cresol(TAC) and 4-(2-thiazolylazo)orcinol(TAO) as functional groups and were characterized by elemental analysis and FT-IR spectrometry. It was found that the content of functional group in chelating resin was 0.60mmol/g in XAD-16-TAC and 0.68mmol/g in XAD-16-TAO respectively. The chelating resins were stable in acidic and alkaline solution and can be reused over 10 times. The sorption behavior of some metalions to two chelating resins was investigated by batch method, which included batch equilibrium, effect of pH, coexisting ions and masking agent. For the optimum condition of sorption, the time required for equilibrium was about 1 hour and optimum pH was 5. In the presence of anions such as ${SO_4}^{2-}$ and $CH_3COO^-$, the sorption of U(VI) ion was slightly reduced but other anions such as $Cl^-$ and $NO{_3}^-$ revealed no interference effect. Also, sorption capacity of U(VI) ion was decreased by addition of $CO{_3}^{2-}$ ion because of complex formation of $[UO_2(CO_3)_3]^{4-}$, but alkali metals and alkali earth metals including Na(I), K(I), Mg(II), and Ca(II) were not affected for the sorption extent. Masking agent, NTA showed better separation efficiency of U(VI) ion from coexisting metal ions such as Th(IV), Zr(IV), Hf(IV), Cu(II), Cd(II), Pb(II), Ni(II), Zn(II) and Mn(II) than EDTA, CDTA.

• Analytical Science and Technology
• /
• v.17 no.3
• /
• pp.199-210
• /
• 2004

A new polystyrene-divinylbenzene chelating resin containing 4,5-dihydroxy-naphthalene-2,7-disulfonic acid (chromotropic acid : CTA) as functional group has been synthesized and characterized. The sorption and desorption properties of this chelating resin for Cr(III) ion and Cr(VI) ion including nine metal bloodstain. As a results, FOB test kit could be effectively applied to identification of human blood at chelating resin was stable in acidic and alkaline solution. The Cr(VI) ion is selectively separated from Cr (III) ion at pH 2 and the maximum sorption capacity of Cr(VI) ion is 1.2 mmol/g. In the presence of anions such as $F^-$, $SO{_4}^{2-}$, $CN^-$, $CH_3COO^-$, $NO{_3}^-$, the sorption of Cr(VI) ion was reduced but anions such as $PO{_4}^{3-}$ and $Cl^-$ revealed no interference effect. The elution order of metal ions obtained from breakthrough capacity and overall capacity at pH 2 was Cr(VI)>Sn(II)>Fe(III)>Cu(II)>Cd(II)${\simeq}Pb(II){\simeq}Cr(III){\simeq}Mn(II){\simeq}Ni(II){\simeq}Al(III)$. Desorption characteristics for Cr(VI) ion was investigated with desorption agents such as $HNO_3$, HCl, and $H_2SO_4$. It was found that the ion showed high desorption efficiency with 3 M HCl. As the result, the chelating resin, XAD-16-CTA was successfully applied to separation and preconcentration of Cr (VI) ion from several metal ions in metal finishing works.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.5
• /
• pp.229-233
• /
• 2002

Nano-sized ZnO particles were successfully synthesized at low temperatures by a polymerized complex method via an organochemical route. The polymeric precursors could be prepared using Zn nitrate hexahydrate and a mixed solution of citric acid and ethylene glycol as a chelating agent and a reaction medium. The polymeric precursors were calcined at temperatures from 300 to $700^{\circ}C$ for 3 h, and evaluated for degree of crystallization process, thermal decomposition, surface morphology and crystallite size. The thermal decomposition and crystallization process were analyzed by TG-DTA, FI-IR and XRD. The morphology and crystallite size of the calcined particles were evaluated by scanning electron microscopy (SEM), transmittance electron microscopy (TEM) and Scherrer's equation. Crystallization of the ZnO particles was detected at $300^{\circ}C$ and entirely completed above $400^{\circ}C$. Particles calcined between 400 and $700^{\circ}C$ showed a uniform size distribution with a round shape. The average particle sizes calcined at $400^{\circ}C$ for 3 hour were 30~40nm showing an ordinary tendency to increase with the temperatures.

• Journal of the Korean Chemical Society
• /
• v.53 no.2
• /
• pp.152-158
• /
• 2009

Spectrophotometric investigation of the interaction of Cefpodoxime proxetil (CFP) with $Ca^{2+},\;Mg^{2+},\;Mn^{2+},\;Fe^{3+},\;Co^{2+},\;Ni^{2+},\;Cu^{2+}$ and $Zn^{2+}$ in acidic medium showed the formation of 1:1 complex. The absorption spectrum of pure drug exhibits two prominent peaks at 270 and 345 nm. Its spectra scanned at several pH exhibited two isosbestic points (305 and 330 nm) indicating the presence of zwitterionic condition of drug in solution phase. The fluorescence emission spectra of CFP in presence of different concentrations of metal ions showed enhancement in fluorescence intensity which is ascribed to chelating enhancement fluorescence effect (CHEF). The stoichiometry of the complexes was determined by Job’s and Benesi-Hildebrand method. The stability of the complexes follow the order $Ca^{2+}\;<\;Mg^{2+}\;<\;Co^{2+}\;<\;Ni^{2+}\;<\;Zn^{2+}\;<\;Mn^{2+}\;<\;Cu^{2+}\;<\;Fe^{3+}$.

• Journal of Ecology and Environment
• /
• v.30 no.3
• /
• pp.271-276
• /
• 2007

A simple and efficient protocol was developed for culturing Cu-tolerant and Cu-accumulating plants via pre-adaptation to Cu during plant tissue culture. We induced multiple shoots from begonia (Begonia evansiana Andr.) leaf explants on MS medium supplemented with naphtaieneacetic acid and benzyladenine. After 3 months, small plantlets were transferred to MS medium supplemented with $100{\mu}M\;CuCl_2$ for pre-adaptation to Cu and cultured for 5 months. Then, these plantlets were individually planted in pots containing artificial soil. An additional 500 mg of Cu dissolved in 1/4 strength MS solution was applied to each pot during irrigation over the course of 2 months. We planted pre-adapted and control begonias in soil from the II-Kwang Mine, an abandoned Cu mine in Pusan, Korea, to examine their ability to tolerate and accumulate Cu for phytore-mediation. Pre-adapted begonias accumulated $1,200{\mu}g$ Cu/g dry root tissue over the course of 45 days. On the other hand, non-Cu-adapted controls accumulated only $85{\mu}g$ Cu/g dry root tissue. To enhance Cu extraction, chelating agents, ethylenediamine tetraacetic acid (EDTA)-dipotassiun and pyridine-2,6-dicarboxylic acid (PDA), were applied. While the chelating agents did not enhance accumulation of Cu in the roots of control begonias, EDTA application increased the level of Cu in the roots of pre-adapted begonias twofold (to $2,500{\mu}g$ Cu/g dry root tissue). Because pre-adapted begonias accumulated a large amount of Cu, mainly in their roots, they could be used for phytostabilization of Cu-contaminated soils. In addition, as a flowering plant, begonias can be used to create aesthetically pleasing remediation sites.

• Restorative Dentistry and Endodontics
• /
• v.42 no.2
• /
• pp.105-110
• /
• 2017

Objectives: This study investigated the cleaning ability of ultrasonically activated irrigation (UAI) and a novel activation system with reciprocating motion (EC, EasyClean, Easy Equipamentos $Odontol\acute{o}gicos$) when used with a relatively new chelating agent (QMix, Dentsply). In addition, the effect of QMix solution when used for a shorter (1 minute) and a longer application time (3 minutes) was investigated. Materials and Methods: Fifty permanent human teeth were prepared with K3 rotary system and 6% sodium hypochlorite. Samples were randomly assigned to five groups (n = 10) according to the final irrigation protocol: G1, negative control (distilled water); G2, positive control (QMix 1 minute); G3, QMix 1 minute/UAI; G4, QMix 1 minute/EC; G5, QMix 3 minutes. Subsequently the teeth were prepared and three photomicrographs were obtained in each root third of root walls, by scanning electron microscopy. Two blinded and pre-calibrated examiners evaluated the images using a four-category scoring system. Data were statistically analyzed using Kruskal-Wallis and Dunn tests (p < 0.05). Results: There were differences among groups (p < 0.05). UAI showed better cleaning ability than EC (p < 0.05). There were improvements when QMix was used with auxiliary devices in comparison with conventional irrigation (p < 0.05). Conventional irrigation for 3 minutes presented significantly better results than its use for 1 minute (p < 0.05). Conclusions: QMix should be used for 1 minute when it is used with UAI, since this final irrigation protocol showed the best performance and also allowed clinical optimization of this procedure.