• 분석과학
• /
• 제17권6호
• /
• pp.454-463
• /
• 2004

XAD-16-Chromotropic acid (CTA)형 킬레이트 수지에 대한 몇 가지 금속이온의 흡착특성을 뱃치법과 용리법으로 조사하였다. pH 변화에 따른 금속 이온의 흡착율을 조사한 결과 pH 3.0 ~ 6.0에서 Hf(IV), Zr(IV), Th(IV) 이온이 다른 금속 이온들에 비해 높은 선택성을 보였으며, Zr(IV)의 최대흡착용량은 0.81 mmol/g이었다. 가리움제로서 CDTA, EDTA, NTA 및 $NH_4F$ 등을 사용하여 흡착에 미치는 영향을 조사한 결과 혼합 금속 용액으로부터 몇 가지 희토류 금속 이온들의 분리가 가능함을 알 수 있었다. 킬레이트 수지에 대한 몇 가지 금속 이온들의 흡착거동을 용리법으로 조사 검토한 결과 pH 4에서 돌파점 용량과 총괄 용량으로부터 얻은 금속 이온의 용리 순서는 Zr(IV)>Th(IV)>Hf(IV)>U(VI)>Cu(II)>In(III)>Pb(II) 이었다. 한편 HCl, $HNO_3$, $HClO_4$ 등의 탈착제에 의한 탈착 특성을 조사한 결과 2 M HCl에서 높은 탈착효율을 나타내었다. XAD-16-CTA 킬레이트 수지는 혼합 금속이온 중에 함유된 Th(IV) 이온의 선택적 분리 및 회수에 유용함을 알 수 있었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제11권6호
• /
• pp.69-75
• /
• 2006

지하 저장 탱크로부터의 유류 유출로 인하여 전세계적으로 넓은 지역의 토양 및 지하수가 오염되고 있다. Methyl tert-butyl ether(MTBE)는 대기 오염 감소를 위하여 널리 사용되고 있는 유류 첨가제이지만 토양 및 지하수로 유입되어 섭취 되었을 때 발암 가능성이 있는 유독 물질이다. 본 연구는 고도 산화 처리 기법 중 유기 오염물의 분해에 높은 효율을 나타내는 고전적 Fenton reaction의 최대 단점인 강한 산성(pH 2.5-3) 의존성을 극복한 새로운 산화 처리 기법을 개발하여 고농도의 MTBE를 효과적으로 분해 하는 것을 그 목적으로 하여 자연 친화적인 chelating agents를 사용하여 중성 영역에서 Fenton reaction을 가능하게 하는 기법인 Modified Fenton reaction과 Ultra Violet light(UV)를 이용하여 분해효율을 극대화 하는 Photo-assisted Fenton reaction을 응용한 Modified Photo-Fenton reaction system을 개발하여 최적 반응 조건 및 반응 차수, 반응 메커니즘을 밝혀내었다. 낮은 독성과 높은 생분해성을 나타낸 Citrate ion을 chelating agents로 선정하였으며 최적 반응 조건은 [$Fe^{3+}$] : [Citrate] = 1 mM : 4 mM, 3% $H_2O_2$, 17.4 kWh/L UV dose, 초기 pH 6.0이며 이 조건에서 1000 ppm MTBE를 분해한 결과 6시간 후 86.75%, 16시간 후 99.99%의 높은 분해율을 나타냈으며 최종 pH는 6.02로 안정적이었다. 또한 Modified Photo-Fenton reaction을 이용한 MTBE 분해 반응은 유사 1차 반응을 나타내었으며 methoxy group이 ${\cdot}OH$ radical과 주로 반응하여 tert-butyl formate(TBF)가 주요 분해 산물이 되는 분해 경로를 따른 다는 것이 밝혀졌다. 본 연구로 개발된 Modified Photo-Fenton reaction에서 발생되는 산화제인 ${\cdot}OH$ radical의 비선택적 반응성을 고려할 때 본 system은 다른 종류의 유기 오염물 분해에도 효과적일 것으로 판단된다.

• 한국세라믹학회지
• /
• 제31권9호
• /
• pp.1060-1068
• /
• 1994

Stable zirconia sol was prepared from zirconium butoxide Zr(OC4O9)4 as a precursor and ethylacetoacetate(EAcAc) or diethylene glycol(DEG) as a chelating agent under ambient agent under ambient atmosphere by Sol-Gel process. The sythesized sol was coated on 304 stainless steel substrate by dip coating, thereafter zirconia film could be obtained by heat-treatment at $600^{\circ}C$. The characteristics of coating film were determined by FT-IR, XRD, and ellipsometion peak represented Zr-O-Zr bonding of tetragonal phase was shown at 470cm-1. Crystallization of zirconia gel and film from amorphous state to tetragonal phase started at 40$0^{\circ}C$, and then transformed into monoclinic phase around $700^{\circ}C$. Zirconia film coated on 304 stainless steel substrate showed relatively low porosity of 16% when it was coated with 0.4M zirconia sol and thereafter heat-treated at 80$0^{\circ}C$ and the film was densified continuously up to 90$0^{\circ}C$. The zirconia film of 10 nm thick acted as a protective layer against oxidation up to $700^{\circ}C$.

• 한국재료학회지
• /
• 제22권10호
• /
• pp.526-530
• /
• 2012

Silica-based ceramic-matrix composites have shown promise as advanced materials for many applications such as chemical catalysts, ceramics, pharmaceuticals, and electronics. $SiO_2$-CuO-$CeO_2$ multi-component powders and their thin film, using an oxalic acid template as a chelating agent, have larger surface areas and more uniform pore size distribution than those of inorganic acid catalysts. $SiO_2$-CuO-$CeO_2$ composite powders were synthesized using tetraethylorthosilicate, copper (II) nitrate hemi (pentahydrate), and cerium (III) nitrate hexahydrate with oxalic acid as template or pore-forming agent. The process of thermal evolution, the phase composition, and the surface morphology of these powders were monitored by thermogravimetry-differential thermal analysis (TG-DTA), X-ray diffractometry (XRD), field-emission scanning electron microscopy (FE-SEM), and energy dispersive X-ray spectrometry (EDXS). The mesoporous property of the powders was observed by Brunner-Emmett-Teller surface (BET) analysis. The improved surface area of this powder template with oxalic acid was $371.4m^2/g$. This multi-component thin film on stainless-steel was prepared by sol-gel dip coating with no cracks.

• 한국환경과학회지
• /
• 제8권3호
• /
• pp.371-377
• /
• 1999

The effects of benzamidoxime concentration, solvents and temperature on the degree of metal extraction were investigated to apply benzamidoxime to heavy metal extraction as chelating agent. Benzamidoxime was synthesized from benzonitrile with hydroxylamine. The chemical structure of benzamidoxime was identified. The degree of heavy metal extraction was increased with increasing the concentration of benzamidoxime and decreasing the extraction temperature. Benzamidoxime was found to be an concentration of benzamidoxime and decreasing the extraction temperature. Benzamidoxime was found to be an effective extractant for Cu-extraction by benzene or chloroform. The relationship between the thermodynamic overall equilibrium constant and absolute temperature was expressed as log K = -5.56 ＋ $855T^{-1}$. Heat of extraction, $$\Delta$H^0$ were calculated from overall equilibrium constants at various temperature and the extraction reactionby benzamidoxime was found to be exthothermic.

• Journal of Microbiology and Biotechnology
• /
• 제6권6호
• /
• pp.407-413
• /
• 1996

A novel type of extracellular phospholipase $A_1$ was isolated from Serratia sp. MK1 and purified to homogeneity by ammonium sulfate precipitation, anion exchange and gel filtration chromatography. The purified enzyme was a monomer with a molecular mass of about 43, 000 Da. This enzyme showed the highest lipolytic activity toward phosphatidylserine among the phosphoglycerides tested, and preferentially catalyzed the hydrolysis of the ester bond in phosphatidic acid to lyso-phosphatidic acid. Enzyme activity was completely inhibited by the addition of a chelating agent such as EDTA, and inhibited enzyme activity was fully recovered by the presence of $Ca^{2+}$. This implies that the enzyme requires $Ca^{2+}$ for activity. The enzyme was stable up to $70^{\circ}C$ when incubated for 1 h at pH 8.5, and the optimal pH and temperature were 8.5 and $50^{\circ}C$, respectively.

• Progress in Superconductivity
• /
• 제5권1호
• /
• pp.80-83
• /
• 2003

Superconducting YBCO thin films are fabricated on single-crystalline substrates by Metallo-organic Depostion process employing Trifluoroacetic acid as a chelating agent (MOD-TFA). (100)-oriented single crystalline LaAlO$_3$ substrates were employed to grow superconducting film with high crystallinity. The fully processed YBCO thin films were characterized with XRD, SEM, EDS, etc. The microstructures of YBCO thin films show labyrinth-like patterns. The origin of this microstructure was delineated by compositional inhomogeneity during the MOD process and it was shown that the microstructure may be modified by additives. In this work, effects of additives on the microstructures and electrical properties of YBCO thin films have been investigated.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 1986년도 추계학술대회
• /
• pp.532.2-532
• /
• 1986

Alkaline protease which is an important enzyme used in detergents, leather tanning and food industry was produced by alkalophilic bacterium, Bacillus sp. KCTC 1723 isolated from soil. The maximum productivity of the enzyme in alkaline medium containing 1% sodium bicarbonate was obtained by incubating for 3 days at 37$^{\circ}C$. The optimum pH of the enzyme was 11.5 and calcium ion was effective on stabilization of the enzyme at high temperature. The enzyme was not inhibited by metal chelating agent such as El)TA but inhibited by diisopropyl fluorophosphate. Purification of the enzyme was carried out DEAE- and CM-cellulose column chromatographies and molecular weight of the purified enzyme was determined

• Journal of Applied Biological Chemistry
• /
• 제59권1호
• /
• pp.57-62
• /
• 2016

In this study, we optimized fermentation conditions for the solid state fermentation of rice bran with Monascus pilosus KCCM60084, and the antioxidant activities were investigated. Optimal fermentation conditions were determined by the production of Monacolin K, a functional secondary metabolites with cholesterol lowering activity. The highest Monacolin K production were 2.88 mg/g observed on day 10 with 45% moisture content in the substrate when inoculated with 5% inoculum (w/w). Reducing power, iron chelating activity and $ABTS^+$ radical scavenging activity were significantly enhanced after fermentation by 60, 80, and 38% respectively. Furthermore, the content of total flavonoid were found to be increased by 4.58 fold. Based on these results, Monascus-fermented rice bran showed strong possibility to be used as a natural antioxidant agent due to its enhanced antioxidant activity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.821-825
• /
• 2002

ZnO thick films by Sol-Gel processing were investigated electrics, optics and the sensing characteristics of CO gas. Using the znic acetate dihydrate and acetylaceton (AcAc) as a chelating agent, stable ZnO sol was synthesized. ZnO phase was crystallized through the heat-treatment at $70^{\circ}C$ for 4hrs and influenced the sensing characteristics of the electrics and CO gas by uniform particle distributions not related particle size. The samples on the alumina substrate by thick films were investigated the properties of electrics and the effect of sensing. The sensitivity was so excellent in the sample of the heat-treatment at $600^{\circ}C$ for 12hrs and good in the heat-treatment for 1hrs generally. Crystallization and volatilization of organic materials according to the change of heating treatment temperature of thick films were analyzed by TG-DTA, XRD and mirostructure of thick films were observed by SEM.