• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.379-384
• /
• 2014

In case of sunken tankers, remaining-oil recovery operation should be conducted due to possible oil spill accident. However, the deep sea operation make difficulties in checking the completion of remaining oil recovery process, therefore the work termination procedure is very important. In this paper, a reasonable work termination procedure through the comparison and analysis of two cases(Youil No.1 and Osung No.3, Kyung-Shin) which were performed in different method, using disparate equipment. By investigating previously applied methods and techniques, work speed, safety and expenses were compared. The proposed ending procedure of the remaining-oil recovery project is to recover the remaining oil from each cargo tanks and to clean up such tanks whilst an independent surveyor proceeds to a confirmation procedure whereby said surveyor checks out whether any remaining oil exists by putting a stick in each cleaned up tanks and opening up the hatch cover of the tanks or the top place of the tanks to confirm the cleanness of oil. Such procedure shall be done through discussion by the ordering party, contractor and the independent surveyor all together with a flexible application.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.15 no.3
• /
• pp.371-379
• /
• 2008

Purpose: The objective of the present study was to develop and evaluate a legal communicable diseases (LCDs) electronic system for infection control. Method: The system was developed through the procedure of analysis, design, implementation, application and evaluation, and was applied within an OCS (order communication system). Results: As indicated by the main menu, the present system is composed of an improved perception system for enhancing perception of LCDs, LCDs identification system, and improved efficiency in the report system. Detailed items included in the main menu are introduction and log-in screen, pop-up window for checking the outbreaks of LCDs, decision making icon, electronic signature icon, electronic report form, email system, etc. The total number of reports was greater after the application of the system (n=99) than before (n=80), and the adequacy of report time was statistically significantly higher after application of the system (P<0.05) Conclusion: The present system suggests a new method for LCDs report and infection control, and is expected to be adopted by other medical institutions in the future.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.181-186
• /
• 2005

In collaborative environment, it is necessary that the participants in collaboration should share the same understanding about the semantics of terms. For example, they should know that 'Part' and 'Item' are different word-expressions for the same meaning. In this paper, we consider sharing between CAD and PDM data. In order to handle such problems in information sharing, an information system needs to automatically recognize that the terms have the same semantics. Serving this purpose, the semantic mapping logic and the ontology based mapper system is described in this paper. In the semantic mapping logic topic, we introduce our logic that consists of four modules: Character Matching, Instance Reasoning, definition comparing and Similarity Checking. In the ontology based mapper, we introduce the system architecture and the mapping procedure.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.453-456
• /
• 2007

The purpose of this study is to explain the importance of Vibration Monitoring Device by introducing an example of Predictive Maintenance System using Condition Monitoring System of Hydro-turbine generator. Confirming vibration of generation equipment is commissioning procedure during equipment completion for checking guaranteed items. Data from Generator output range are used to determine output band to continue the performance of equipment. The Vibration Monitoring System is not absolute method of maintenance, but if it is used well with expert, it will be visible, data-analyzed, scientific maintenance more than others. And also, Condition Monitoring System is very important for remote controlled small hydro-power plant although most of it is installed in Large hydro-power plant.

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.4
• /
• pp.76-84
• /
• 1991

The off-road tractive performance of tracked vehicles can be evaluated in terms of soil thrust, motion resistance and drawbar pull. The ability to predict accurately ground pressure distribution under track is of importance since the vehicle sinkage and motion resistance are closely related to it. While the formulation of the method for predicting ground pressure distribution follows closely in spirit the ideas outlined for the terrain with linear pressure- sinkage relation case by Garber and Wong, the analysis of various terrain stiffness is magnified by numerical implementation procedure. The effects of soil parameters on tractive forces can be introduced through the terrain-track interaction such as pressure-sinkage and shearing characteristics. It is illustrated by determining the drawber pull-slip relation and corresponding ground pressure distribution for the terrains typically chosen and by comparing the results with the conventional ones based on normal ground pressure. The factorial experiment method is finally adopted for checking the sensitivity of the values of soil parameters on the drawbar pull.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.57-60
• /
• 2006

The purpose of this study is to explain the importance of Vibration Monitoring Device by introducing an example of Predictive Maintenance System using Condition Monitoring System of Hydro-turbine generator. Confirming vibration of generation equipment is commissioning procedure during equipment completion for checking guaranteed items. Data from Generator output range are used to determine output band to continue the performance of equipment. The Vibration Monitoring System is not absolute method of maintenance, but if it is used well with expert, it will be visible, data-analyzed, scientific maintenance more than others. And also, Condition Monitoring System is very important for remote controlled small hydro-power plant although most of it is installed in Large hydro-power plant.

• Interaction and multiscale mechanics
• /
• v.2 no.3
• /
• pp.263-276
• /
• 2009

This paper is intended to investigate interaction response of a train running over a suspension bridge undergoing support settlements. The suspension bridge is modeled as a single-span suspended beam with hinged ends and the train as successive moving oscillators with identical properties. To conduct this dynamic problem with non-homogeneous boundary conditions, this study first divides the total response of the suspended beam into two parts: the static and dynamic responses. Then, the coupled equations of motion for the suspended beam carrying multiple moving oscillators are transformed into a set of nonlinearly coupled generalized equations by Galerkin's method, and solved using the Newmark method with an incremental-iterative procedure including the three phases: predictor, corrector, and equilibrium-checking. Numerical investigations demonstrate that the present iterative technique is available in dealing with the dynamic interaction problem of vehicle/bridge coupling system and that the differential movements of bridge supports will significantly affect the dynamic response of the running vehicles but insignificant influence on the bridge response.

• IE interfaces
• /
• v.18 no.3
• /
• pp.297-307
• /
• 2005

PCB assembly is a complicated and difficult process to optimize due to the necessity of simultaneous consideration of component’s rack assignment and board mounting sequencing. An efficient PCB assembly method is developed by using neighboring positioned identical components information as well as quantity and size of the components. It is found that same type of components are located closely each other by checking real PCBs and interviewing with PCB designers in practice. Better performance of the developed procedure is obtained along with more number of total components and more number of neighboring positioned identical components cases. Simulation models are developed using Visual C++ for performance evaluation purposes of the suggested heuristic.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.579-584
• /
• 1999

The purpose of the present paper are not to develope machine tools of new concepts and advanced mechanisms but to introduce and apply new methods and concepts in the design procedure by using and changing the previously existing technologies. In this paper 3D modeller was proposed for designing machine tools and the design and the better manufacturability checking than 2D one so that design error was dramatically reduced. As designer may easily understand the real shape of a part and assembly object, it's easy to draw the drawings not only in a conceptual design but also in a detailed design. Also, design automation software enabled designer to consider the real important design parameters by reducing time to spend in estimating and calculating the strength of the model by the computer aided automatic calculation instead of a tedious and complex calculation by manual method and help him to easily make the decision for selecting the stocks and design the structure of part or unit of machine tools.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.786-791
• /
• 2003

We have studied on the main causes of pressure drop in the paint hose under the spraying with airless spray pump and suggest calculation method for selecting the optimum pressure drop during the spraying. Among many factors contributing the pressure drop during the airless spraying procedure of paint, some of the key factors and the correct method for checking pressure loss between airless pump and spray gun are addressed. We have developed pressure loss calculation method which depending on hose length and diameter, viscosity and flow rate in the painting hose during the spraying. also we have developed calculation equation for the expected spray tip flow rate which depending on pressure and specific gravity and tip size.