• Journal of Magnetics
• /
• 제21권3호
• /
• pp.413-420
• /
• 2016

The permanent magnet synchronous motor has high efficiency driving performance and high power density output characteristics compared with other motors. In addition, it has good regenerative operation characteristics during braking and deceleration driving condition. For this reason, permanent magnet synchronous motor is generally applied as a power train motor for electrical vehicle. In permanent magnet synchronous motor, the most probable causes of fault are demagnetization of rotor's permanent magnet and short of stator winding turn. Therefore, the demagnetization fault of permanent magnet and turn fault of stator winding should be detected quickly to reduce the risk of accident and to prevent the progress of breakdown of power train system. In this paper, the fault diagnosis method using high frequency low voltage injection was suggested to diagnose the demagnetization fault of rotor permanent magnet and the turn fault of stator winding. The proposed fault diagnosis method can be used to check the faults of permanent magnet synchronous motor during system check-up process at vehicle starting and idling stop mode. The feasibility and usefulness of the proposed method were verified by the finite element analysis.

• Applied Microscopy
• /
• 제25권2호
• /
• pp.80-87
• /
• 1995

An analytical electron microscope system has been widely used in biology, medicine, veterinary medicine, agriculture, and materials, etc. nowadays in Korea Market since mid of 1980's. How to install and to choose the equipments? The answers are which prerequisites are needed to us. The purpose is going to introduce the prerequisites of the pre-installation and installation of Philips analytical electron microscope(CM 12/STEM and SEM 515, Philips, The Netherlands) in the National Institute of Safety Research, Seoul and to discuss the check-subjects. The check-subjects in the pre-installation and installation are more than 24. The influence of magnetic fields, mechanical vibrations, earth is crucial factor for decision of installation site. The areas of our electron microscope center are $105.6m^2$ and have the Automatic Image Analyzer System(IBAS, Kontron Co., Germany) connecting to the SEM mode. Water temperature was controlled by the NESLAB recirculatory chillers(NESLAB Co., U.S.A.).

• 한국지능시스템학회논문지
• /
• 제14권4호
• /
• pp.468-472
• /
• 2004

본 논문은 품질 검사, 홍채 위치 측정, 특징 추출, 검증으로 구성된 지능형 홍채 인식 시스템을 소개한다. 품질 검사를 위하여 동공 경계에 관한 국부적 통계를 사용한다. 홍채 영역을 분리하고 찾기 위하여 잘 알려진 가우시안 혼합 모형(Gaussian mixture model)을 사용한다. 특징 추출 방법은 최적화된 파형 단순화를 기초로 한다. 검증을 위해서 지능형 가변임계값을 사용한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2215-2222
• /
• 2010

Advanced EMU have been enhanced in terms of safe transport and maintainability. It is a new urban railway technology that enables an operation institution to cut repair and maintenance costs and customers to use convenient service at lower costs based on IT technology. If a development vehicle of Advanced EMU is completed, it will be used to test the entire advanced EMU system through sufficient performance check and reliability check prior to operation in commercial line. It will also verify efficiency, safety, punctuality and energy efficiency of transport. Accordingly, it is necessary to figure how to repair and maintain vehicles to enhance safety of Advanced EMU system in cooperation with operation during the period of comprehensive evaluation on the operation of a development vehicle in a test line. In this paper, we investigated the maintenance program of Advanced EMU on test operation in Dabul line. The test condition and operation environment of Advanced EMU in Daebul line was analyzed.

• 한국멀티미디어학회논문지
• /
• 제9권6호
• /
• pp.728-734
• /
• 2006

Carrier interferometry code is considered as a promising scheme that provides significant performance improvement via frequency diversity effect. Space-time coding is commonly employed to achieve a performance gain through space diversity. The combination of these techniques and forward error correction coding will lead to enhanced system capacity and performance. This paper presents a low-density parity check (LDPC) coded space-time orthogonal frequency division multiplexing (OFDM) transmission scheme with carrier interferometry code for high-capacity and high-performance mobile multimedia communications. Computer simulations demonstrate that the proposed mobile multimedia transmission system offers a considerable performance improvement of approximately 9dB in terms of Eb/No in the Rayleigh fading channel with relatively low delay spread, in comparison with space-time OFDM. Performance gains are further increased, comparing with traditional OFDM systems.

• 항공우주시스템공학회지
• /
• 제8권1호
• /
• pp.1-6
• /
• 2014

The conventional hydraulic circuits for electro-hydrostatic actuators equipped with a single-rod cylinder can oscillate under overrunning load conditions. In this paper the oscillation problem encountered in the conventional hydraulic circuits for EHAs is analyzed and it is shown by simulation results that this problem can be solved by employing a counter balance valve instead of a pilot-operated check valve generally used in the conventional hydraulic circuits.

• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.119-125
• /
• 2008

A new type of swivel unit is suggested in order to complement weak points of the existing. This new type of Swivel unit is developed by adopting a spring type cable which has elasticity and restoring force. To minimize the troubles in the process of manufacturing during operating the new type system, strength analysis and the check of interference between parts are accomplished with CATIA. The check of rotating performance is also carried out to determine the diameter and length of spring type cable by SimDesigner motion analysis. Swivel unit used in the robot spot welding is developed with spring type cable and its usefulness in the industrial field is verified through experiments. This system has been registered for patent.

• 통합자연과학논문집
• /
• 제9권3호
• /
• pp.199-205
• /
• 2016

In this paper, we established ZIGBEE home network and combined smart-grid and u-Healthcare system. We assisted for amount of electricity management of household by interlocking home devices of wireless sensor, PLC modem, DCU and realized smart grid and u-Healthcare at the same time by verifying body heat, pulse, blood pressure change and proceeded living body signal by using SVM algorithm and variety of ZIGBEE network channel and enabled it to check real-time through IHD which is developed by user interface. In addition, we minimized the rate of energy consumption of each sensor node when living body signal is processed and realized Query Processor which is able to optimize accuracy and speed of query. We were able to check the result that is accuracy of classification 0.848 which is less accounting for average 17.9% of storage more than the real input data by using Mjoin, multiple query process and SVM algorithm.

• 전자공학회논문지B
• /
• 제29B권1호
• /
• pp.18-25
• /
• 1992

In this paper, a rule checker which aids in composing a consistent knowledge base by checking redundancies and inconsistencies in a knowledge base is proposed. The proposed algorithm checks the rules by representing the rule connections as a network . The standard model of the rules adapted in this algorithm is in the Conjunctive Normal Form which includes NOT's, and rules of conventional expert system can be checked by converting them into the standard form by a rule form at converter. When compared with Ginsberg's KB-reducer which is conceptually most similar to the proposed algorithm among existing methods,it is shown by a computer simulation that with 360 rules, the checking time is three times faster and the rate increased as the number of rules increased, but the total memory requirement of the proposed agorithm is 1.2 times larger. The proposed algorithm has further advantages in that it can check circular rule chains and can find the paths of the redundant and inconsistent rules.

• 전기학회논문지
• /
• 제66권6호
• /
• pp.988-994
• /
• 2017

The risk of facilities in catenary is increasing because the railway section extension and high-speed train service. And visual check of workforce is not enough time to maintain the extensive railway facilities. Accordingly, The technical development trend of maintenance of railway facilities can be seen by automation and application of IT technology, especially the mechanization work and the information technology are spreading in the maintenance work of the train line solved by manpower. In this paper, we describe the method by obtaining the cantilever image using acquisition device and pole inspection system in high speed vehicle, to check the variation of the cantilever component using image processing.