• 인터넷정보학회논문지
• /
• 제9권5호
• /
• pp.47-58
• /
• 2008

차트는 여러 종류의 정보를 시각적으로 표현하기 때문에 정보 전달력이 높다. 이런 이유로 웹 개발자들도 정보를 표현할 때 차트를 자주 활용한다. 그러나 차트를 활용하기 위해서는 차트를 작성하는 전용 프로그램이 필요하며, 작성된 차트도 일반적으로 래스터 방식의 이미지로 표현되기 때문에 차트정보를 공유하기 어렵다. 이러한 래스터 방식의 이미지는 이미지의 크기가 고정되기 때문에 이미지의 크기를 변경하면 이미지가 왜곡된다는 문제점이 발생한다. 본 논문에서는 차트정보의 호환성과 차트정보의 공유 문제를 해결하기 위해 CML(Chart Markup Language)을 이용한 웹 기반의 차트출력시스템을 제안한다. 본 논문에서 제안한 차트출력시스템은 XML, Text, HTML 문서를 분석하여 차트정보를 추출한 후, 추출한 차트정보를 CML로 변환하고, 변환된 CML문서를 벡터 방식을 이용하여 차트를 웹브라우저에 출력한다. 벡터 방식은 이미지를 표현할 때 벡터를 활용하기 때문에 이미지의 크기가 변경되더라도 이미지가 깨지거나 왜곡되는 현상이 없다는 장점이 있다. 본 논문에서 제안한 CML은 차트정보를 표현하기 위해 정의한 XML 기반의 차트생성언어이다. 웹에서 차트를 표현할 때 CML을 활용하면 차트정보를 쉽게 공유할 수 있으며, 차트정보 변환이 수월하다는 장점이 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.353-357
• /
• 2000

A dimensioning system in a manufacturing process is often complex, especially when a lot of operations are involved in the process. Determination of operational dimensions and tolerances becomes even more complicated if there exist inconsistencies between operational and design relationships among operational dimensions in machining. This chart furnishes a record of the relationships in an easy-to-grasp form, proves that sufficient stock for a cut is available even under adverse conditions, and also proves that separate operations, when taken together, will harmonize as desired. In this paper, various existing roles of the chart have been extended to an operational routing sheet by generating it automatically, providing machining conditions, and verifying operational tolerances.

• 산업경영시스템학회지
• /
• 제17권30호
• /
• pp.153-160
• /
• 1994

In this paper, we present the application of knowledge-based system technique for generating of PLC ladder diagram The developed prototype system receives a time chart as an input and generates a ladder logic as its output This results in the computerization and intellegent processing of PLC programming. The system can be effectively applied to sequence control where the PLC programs need to be frequently changed and generated.

• 한국건설관리학회논문집
• /
• 제24권2호
• /
• pp.13-23
• /
• 2023

도로, 철도 등의 토목시설공사는 제한된 구역에서 공정이 반복적으로 진행되는 건축공사와 달리 수십 km의 수평적 작업공간에서 선형 형태로 공정이 진행되고, 개별 공정은 시점부터 종점까지 거리 단위를 갖는 측점(Station)번호로 관리되고 있다. 이러한 이유로 공정의 작업 위치정보가 주요 관리요소가 되고 있으므로, 일정 정보만을 표현하는 간트공정표기반의 공정관리 체계는 한계점을 가질 수 있다. 본 연구에서는 공정의 시작 및 종료일을 나타내는 일정정보와 시작 및 종료 거리를 나타내는 위치정보를 동시에 표현할 수 있는 선형공정표의 구성 방법론을 제시하고, 이에 근거한 선형공정표 생성 시스템을 개발한다. 연구에서 선형공정표의 좌표축은 X, Y축을 각각 거리와 일정 값으로 구성하였으며, 개별 공정은 작업 내용을 유추할 수 있는 심볼로 표현하여 단순 막대도표 방식 대비 공정표의 시인성을 높였다. 개발된 선형공정표 생성 시스템은 철도시설 교량공사의 실제 공정 데이터를 활용하여 실무적 활용성을 검토하였다.

• 전기학회논문지P
• /
• 제64권3호
• /
• pp.138-142
• /
• 2015

Most of the existing studies on functional safety testing for the railway signaling system software have focused on verifying the functional safety through the monitoring of internal memory embedded railway signaling system. However, the railway signaling system is one of the typical embedded control system in the railway sector, and the embedded software has a characteristic of generating an appropriate outputs through the combination of internal processing in consideration of the current internal status and external input. Therefore, the test approach of using the interface communication channel can be effective way for the functional testing for railway signaling system software in consideration of these characteristic. Since a communication interface specification of the railway signal system has a the properties of the sequence input and output signals, test-case for software testing is the most effective methodology by MSC (Message Sequence Chart) language, one of the graphic language. The MSC-based test-case generating methodology for signaling system software was proposed in this paper.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.114-125
• /
• 1993

In the present study the newly developed CAD/CAM system is applied to the process of the molding design, machining for mini-sized and precise processive die, and the production of press-stamped parts. When the design of a die was completed by means of CAD, wire cut NC data were generated with the aid of a design drawing in the CAD system and then inputed into the wire cut machine, and with the aid of a hole chart which had been made for this purpose, all the data were classified into the categories of CNC milling, jig boring, jig grinding, and machine center, and then developing a program of generating NC data, errors in process were reduced and programming time was shortened. The program was developed by using Autolisp language which was built-in the CAD, and realizing the intergation of designing a die, generating and processing NC data directly by a designer, designing time and machinery processing time were shorted. And the traditionally required working time for design. NC program required 6 days of work becomes 4 days of work by using the developed CAD/CAM system so that the efficiency shows 150% of the reduction working time. The prpgram of the design of the automation a progressive die mold was developed in the PC-Class Autocad system, therefore development expense could be reduced, and the integration of the CAD/CAM of the progressive die mold with the standard DB being built could be realized.

• 산업경영시스템학회지
• /
• 제24권63호
• /
• pp.65-77
• /
• 2001

A more technical perspective is needed in estimating the effect of the Manufacturing Process for improving the Productivity, there are many statistical evaluation methods, convenience sampling, frequencies, histogram, QC seven tools, control chart etc. It is more important for the companies to use six sigma to reduce defective and improve the process control than the technical definition as a disciplined quantitative approach for improvement of process control and a new way of quality innovation. Process network analysis is a technique which has the potentiality for a wide use to improve the manufacturing process which other techniques can't be used to analyze effectively. It has some problems to analyze the process with feedback loops. The branch probabilities during quality inspections depend upon the number of times the product has been rejected. This paper presents how to improve the manufacturing process by statistical process control using branch probabilities, Moment Generating Function(MGF) and Sensitivity Equation.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.127-131
• /
• 1999

Typhoons were known by contributing to transporting plus heat or kinetic energy from equatorial region to midlatitude region. Due to the strong damage from typhoon, we acknowledged the theoretical study and the importance of accurate forecast about typhoon. In this study, typhoon forecasting system was developed to search the tracks of past typhoons or to display similar track of past typhoon in comparison with the path of current forecasting typhoon. It was programmed using Interactive Data Language(IDL), which was a complete computing environment for the interactive analysis and visualization of data. Typhoon forecasting system was also included satellite image and auxiliary chart. IR, Water Vapor, Visible satellite images helped users analyze an accurate forecast of typhoon. They were further refined the procedures for generating water vapor winds and gave an initial indication of their utility for numerical weather prediction(NWP), in particular for typhoon track forecasting where they could provide important information. They were also available for its utility in typhoon tracer or intensity.

• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.1008-1016
• /
• 2019

In the SG (steam generator) of PWR (pressurized water reactor) for a nuclear plant, hundreds of U-shaped tubes are used for the heat exchanger system. They interact with primary pressurized cooling water flow, generating flow-induced vibration in the secondary flow region. A simplified U-tube model is proposed in this study to apply for experiment and its counterpart computation. Using the commercial code, ANSYS-CFX, we first verified the Moody chart, comparing the straight pipe theory with the results derived from CFD (computational fluid dynamics) analysis. Considering the virtual mass of fluid, we computed the major modes with the low natural frequencies through the comparison with impact hammer test, and then investigated the effect of pump flow in the frequency domain using FFT (fast Fourier transform) analysis of the experimental data. Using two-way fluid-structure interaction module in the CFD code, we studied the influence on mean flow rate to generate the displacement data. A feasible CFD method has been setup in this research that could be applied potentially in the field of nuclear thermal-hydraulics.

• 방송공학회논문지
• /
• 제25권4호
• /
• pp.598-608
• /
• 2020

본 논문에서는 실사 3차원 모델 생성용 다시점 카메라 시스템을 통해 획득된 영상에 대한 조명 보상 기법을 제안하고자 한다. 3차원 체적에 대한 촬영은 실내에서 이루어지고 시간에 따른 조명의 위치와 강도는 일정하다고 가정한다. 다시점 카메라는 총 8대를 사용하고, 공간의 중심을 향해서 수렴하는 형태이므로 조명이 일정하다고 할지라도 각 카메라에 입사되는 빛의 강도 및 각도는 다르다. 따라서 모든 카메라는 색상 보정 차트를 촬영하고, 색상 최적화 함수를 이용하여 획득된 8개의 영상 사이의 관계를 정의하는 색상 변환 매트릭스를 획득한다. 이것을 이용하여 색상 보정 차트를 기준으로 모든 카메라로부터 입력되는 영상을 보정한다. 본 논문은 3차원 객체를 8대의 카메라를 이용해 영상 취득할 시 카메라 간의 색차를 최소화하기 위한 컬러 보정 방법을 제안한 것으로 3차원 영상으로 복원 시 영상 간의 색차가 줄어드는 것을 실험적으로 증명하였다.