• 건축사
• /
• 통권655호
• /
• pp.90-95
• /
• 2023

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.139-142
• /
• 2012

2D 콘텐츠 상품의 가치를 반영하기 어렵다. 3D 홀로그램 DID를 이용하면 상품의 매력도, 구매력, 인지도 등 DID영상 시스템이 필요하다. 본 연구에서는 3D 홀로그램, DID영상 시스템, 터치스크린, CMS를 설계하고 3D 홀로그램 콘텐츠 DID 영상시스템을 구현한다. 또한 2D 콘텐츠와 3D 콘텐츠와 3D 홀로그램 DID에 대해 매력도, 구매력, 인지도, 만족도 등을 비교분석한다.

• 한국식품위생안전성학회지
• /
• 제12권1호
• /
• pp.71-77
• /
• 1997

Sulfonamides, a therapeutically important group of antimicrobial drugs, are widely used to treat and prevent the acute systemic and skin infections in dairy cattle. They also pose an economic hazard through inhibition of growth of dairy starter cultures. This study was carried out to compare four screening methods for detection of sulfamethazine in milk and determine the positive milk sample by HPLC method. Sulfamethazine was used to spike at five levels of sulfamethazine. The Lac-Tek test and CharmII test were also consistent better than TTCII test and Delvo SP test in sulfamethazine detection. Analysis probabilities of obtaining a positive response with TTCII test and Delvo SP test assay at 50 ppb sulfamethazine level in milk samples were only 14%, 42% each. Whereas using the Lac-Tek test and CharmII test would have resulted in 100% identification of the five levels. Determination of sufamethazine using the HPLC method in the spiked milk were 10.64, 19.30, 30.76,38.83 and 50.23 ppb, respectively.

• 한국영양학회:학술대회논문집
• /
• 한국영양학회 2000년도 추계학술대회 초록
• /
• pp.52-52
• /
• 2000

• 한국화재소방학회논문지
• /
• 제32권2호
• /
• pp.118-129
• /
• 2018

본 연구는 산업재해예방기관인 안전보건공단(KOSHA)에서 실시한 소화약제 중독 질식 재해사례분석을 통해 소화 약제를 포함한 화학물질의 안전한 취급방안을 제안하기 위함이다. 산업재해통계에 따르면 2011~2016년 산업현장에서 발생한 화학물질 중독 질식재해는 해마다 증가 및 다 변화 양상을 보여주고 있다. 일반 사고성재해와 달리 화학물질 재해는 재해강도가 크고 화학물질 위험성 정보 확인이 어려운 특징이 있다. 화학물질 재해의 예방을 위해서는 화학물질 취급 전 위험성을 평가하는 것이 무엇보다 중요하다. 본 논문은 유해위험성인지와 위험성평가가 어려운 화학물질의 안전한 사용을 위해 안전보건공단에서 개발한 화학물질 필수정보 확인 프로세스(CHEM-i)와 화학물질위험성평가기법(CHARM)의 활용방안을 제시하고자 한다.

• 한국자원식물학회지
• /
• 제29권5호
• /
• pp.588-597
• /
• 2016

Little attention has been paid to the functional aspect of the flower petal of Paeonia lactiflora, compared to that of its root. To determine the components of flower petal of Paeonia lactiflora, we conducted the Fourier transform ion cyclotron resonance (FT-ICR) MASS spectrophotometric analysis. We detected the 24 different types of ingredients from the 70% ethanol extracts of flower petal of peonia lactiflora cv. ‘Red Charm’. The main compounds were quercetin glucopyranosides, methyl gallate, paonioflolol and kaemperol glucopyranosides. We further tested its functional activity. The 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity of the extracts was 87.9-90.4% at 0.1mg/ml. This result showed that these flower extracts have approximately 5-fold stronger antioxidant potential than a previous report with root extracts (Bang et al. 1999). The result of tyrosinase inhibition assay of Paeonia lactflora extract was almost similar to that of arbutin except significantly higher effect in the coral sunset extract at 0.1% concentration. Hyaluronidase inhibition assay showed 76.5% inhibition at 5% concentration of this flower extract, indicating that Peaonia lactiflora flower extracts have the major anti-inflammatory, anti-oxidant and brightening effects. Taken together, these results suggest these three Paeonia lactiflora species extracts might provide the basis to develop a new natural brightening agent.

• 한국동물위생학회지
• /
• 제27권1호
• /
• pp.17-29
• /
• 2004

A multiresidual analysis was performed to determine 12 sulfonamides(sulfacetamide, sulfadiazine, sulfisomidine, sulfathiazole, sulfapyridine, sulfamerazine, sulfamethazine, sulfamonomethoxine, sulfisoxazole, sulfamethoxazole, sulfaquinoxaline, and sulfadimethoxine) in beef and pork simultaneously. The multiresidual analysis for the sulfonamides currently used was able to analyze 5 kinds of sulfonamides at the same time. The method of this 12 sulfonamides multiresidual analysis in this study was matrix solid-phase dispersion(MSPD) by high performance liquid chromatography (HPLC) and liquid chromatography mass spectrometry (LC/MS). The recovery rate of the materials was measured by MSPD method with 3 different extraction solvents; Dichloromethane, DCM: Ethylacetate(3:1), DCM:EA(9:1). Also, samples (84 beef and 205 pork samples) which were positive by EEC-4 plate test from 2001 to 2003 were tested to investigate the kinds of sulfonamides using HPLC. The results from the study were as follows; 1. The recovery rate of the materials was measured by MSPD method with 3 different extraction solvents; Dichloromethane, DCM:Ethylacetate(3:1), DCM:EA(9:1). The method of extraction solvent with DCM:ethyl acetate(9:1) was the most excellent(87.7∼99.3%) in separation and reappearance. 2. In the LC/MS analysis. of sulfonamides, signal to noise ratio was showed relatively high in the positive mode and special ion in the quality analysis was determined via [M+H]$\^$+/ and m/z 156. A spectrum of sulfonamides was showed from all 12 sulfonamides. 3. The samples positive by the EEC-4 plate, a screening test method, were categorized by sulfonamides through Charm II and confirmed the kinds of sulfonamides through HPLC. 1) Among 84 beef samples positive by EEC-4 plate, 20 samples were positive by Charm II and identified as 7 sulfamethazine, 9 sulfadimethoxine, 1 sulfamonomethoxine and 3 unknown status. 2) Among 205 pork samples positive by EEC-4 plate, 42 samples were positive by Charm II and identified as 19 sulfamethazine, 1 sulfadimethoxine, 4 sulfamonomethoxine and 5 unknown status.

• Ocean Systems Engineering
• /
• 제5권3호
• /
• pp.139-160
• /
• 2015

The global performance of the 5MW OC4 semisubmersible floating wind turbine in random waves was numerically simulated by using the turbine-floater-mooring fully coupled and time-domain dynamic analysis program FAST-CHARM3D. There have been many papers regarding floating offshore wind turbines but the effects of second-order wave-body interactions on their global performance have rarely been studied. The second-order wave forces are actually small compared to the first-order wave forces, but its effect cannot be ignored when the natural frequencies of a floating system are outside the wave-frequency range. In the case of semi-submersible platform, second-order difference-frequency wave-diffraction forces and moments become important since surge/sway and pitch/roll natural frequencies are lower than those of typical incident waves. The computational effort related to the full second-order diffraction calculation is typically very heavy, so in many cases, the simplified approach called Newman's approximation or first-order-wave-force-only are used. However, it needs to be justified against more complete solutions with full QTF (quadratic transfer function), which is a main subject of the present study. The numerically simulated results for the 5MW OC4 semisubmersible floating wind turbine by FAST-CHARM3D are also extensively compared with the DeepCWind model test results by Technip/NREL/UMaine. The predicted motions and mooring tensions for two white-noise input-wave spectra agree well against the measure values. In this paper, the numerical static-offset and free-decay tests are also conducted to verify the system stiffness, damping, and natural frequencies against the experimental results. They also agree well to verify that the dynamic system modeling is correct to the details. The performance of the simplified approaches instead of using the full QTF are also tested.

• 한국컴퓨터정보학회논문지
• /
• 제15권9호
• /
• pp.1-8
• /
• 2010

하드웨어-소프트웨어 통합설계에서 다양한 설계제약 조건을 만족하는 임베디드 시스템 개발을 효율적으로 완료하기 위하여 하드웨어와 소프트웨어의 최적분할을 빠른 시간 안에 탐색하는 핵심기술이 필요하다. 본 논문에서는 다양한 하드웨어-소프트웨어 분할에 따른 매핑 조합 중 최적분할에 해당할 수 없는 조합들은 미리 선별하여 탐색대상에서 제외하는 것을 가능하게 하는 맞춤형 매핑 휴리스틱, CHARMS을 제시한다. CHARMS은 응용프로그램의 여러 태스크를 하드웨어 또는 소프트웨어로 매핑하면서, 단위시간 안에 처리되는 태스크의 수인 Parallelism과 일의 양인 Workload 로 Throughput을 예측하고 최적의 분할대상을 선별하는 기존의 휴리스틱보다 향상된 방법으로, 태스크들의 계산 복잡도를 고려하였으며, 설계제약 조건의 중요도를 다양하게 표현할 수 있는 weighted combo-metric을 활용한다. H.263 인코더 설계에서 CHARMS을 이용할 경우 매핑조합의 95.17%를 탐색 대상에서 제외할 수 있었음을 실험을 통하여 보였다.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.845-853
• /
• 2023

The Ministry of Employment and Labor announced a roadmap for reducing serious accidents to create a "safe and healthy workplace, happy Korea" and ordered a risk assessment for all work processes in all workplaces on November 30, 2022. Accordingly, even workplaces that handle new chemicals must conduct risk assessment when introducing new chemicals, but the risk assessment techniques currently proposed by the government focus on preventing conventional accidents such as falls, getting caught, and bumping. Currently, there is a Chemical Hazard Risk Management (CHARM) technique that is most commonly used for chemical risk assessment, but in small and medium-sized businesses that lack professional manpower related to chemical substances, there are many technical terms in the technique and it is difficult to interpret, so its utilization is very low. Therefore, the purpose of this study is to present a method that can make risk assessment easier and simpler before handling new chemicals so that it can be used well in small and medium-sized businesses that lack professional manpower related to chemical substances. Through actual cases, the method of using CHARM was confirmed step by step, and based on this, risk reduction establishment and execution methods were derived. Based on the results of this study, it is expected that it will be used as the best tool for preventing accidents such as acute poisoning when handling chemicals in small and medium-sized workplaces that lack professional manpower related to chemical substances and make every effort to protect workers' health.