• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.4
• /
• pp.386-391
• /
• 2022

The gas insulation switchgear, which is a device for protecting a power system, cannot be supported by the insulation gas itself in a charge unit stored in a metal container. Therefore, molding technology is required to manufacture a gas insulation switch spacer. The APG method injection molding simulation was performed by applying the variables obtained through the physical properties of an epoxy composite used for manufacturing an insulating spacer to a moldflow software. After varying the temperature conditions of heater in the simulation, the thermal characteristics and the degree of hardening of the spacer were analyzed, based on which the optimum process conditions are presented.

• Journal of Hydrogen and New Energy
• /
• v.34 no.1
• /
• pp.26-31
• /
• 2023

In this study, in order to propose a modular method for type IV high aspect ratio modular hydrogen storage vessel, a numerical analysis was conducted on the heat transfer behavior in series and parallel connection methods, and the differences according to each connection method were reviewed. Computational fluid dynamics software was used to check the internal temperature and pressure values of the hydrogen storage container under charging conditions. In terms of thermal safety when charging hydrogen gas, it was confirmed that the parallel modularization method was superior.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.793-802
• /
• 2024

In the framework of the European project SAMOSAFER, this numerical study focuses on some thermal aspects of the Emergency Draining Tank (EDT) located underneath the core of a Molten Salt Reactor. In case of an emergency, this tank passively receives the liquid fuel salt and is designed to ensure a subcritical state. An important requirement is that the fuel does not overheat to maintain the EDT Hastelloy container integrity. The present EDT is based upon a group of hexagonal cooling assemblies arranged in a hexagonal grid and cooled down thanks to conduction through the inert salt layer up to an air flow in charge of removing the heat. This numerical thermal study relies on a conjugated heat transfer analysis coupling a Finite Element solid thermal code (SYRTHES) and two instances of a Finite Volume CFD codes (Code_Saturne). Calculations on an initial design suggest that a simple center airpipe flow is likely to not sufficiently cool the device. Alternative solutions have been evaluated. Introduction of fins to enhance the heat transfer do not bring a noticeable improvement regarding maximum temperature reached. However, a solution in which the central pipe air flow is replaced by several cooling channels located closer to the fuel is investigated and suggests a better cooling.

• Journal of the Korean Society of Food Culture
• /
• v.12 no.5
• /
• pp.477-493
• /
• 1997

The consumers' purchase experiences of some imported agricultural products (rice, sesame, garlic, onion, jujube, red pepper, oak mushroom, apple, dried persimmon) and their consciousness for the labelling of the country of origin for agricultural products in Youngnam region were examined in this study. The sample consisted of 438 women who lived in Taegu, Pusan and other cities of Kyungpook and Kyungnam, and the self-administered questionnaire for the survey was used. The main reasons to purchase the imported agricultural products were the wide distribution and low price of them. Most of the consumers were concerned about safety of the imported agricultural products but only a few people experienced unsatisfaction of the products. The price, quality, package, container, label, and safety of the examined products were evaluated worse than those of the domestic products. Generally, although they suffered unsatisfaction, the consumers did not complain because they wanted to avoid troublesome work, which means the consumers did not assert their rights. Some people did not know the labelling system for the country of origin and the place to charge the market violating it. Therefore, it will be necessary for the consumers to receive education about the labelling system for the country of origin and the compensation criteria for consumers' grievances and damages. The current labelling method for the country of origin generally met the consumers' preference but the consumers wanted to improve the position and color of the label. Most consumers could not differentiate the imported products from the domestic products. The results obtained from the survey suggest consumer education for the labelling system for the country of origin and the compensation criteria should be activated through various ways such as mass media and consumer organizations.

• Journal of Mechanical Science and Technology
• /
• v.19 no.4
• /
• pp.1044-1051
• /
• 2005

The isothermal characteristics of a rectangular parallelepiped sodium heat pipe were inves­tigated for high-temperature applications. The heat pipes was made of stainless steel of which the dimension was $140\;m\;(L)\;{\times}\;95m\;(W)\;{\times}\;46 m\;(H)$ and the thickness of the container was 5 mm. Both inner surfaces of evaporator and condenser were covered with screen meshes to help spread the liquid state working fluid. To provide additional path for the working fluid, a lattice structure covered with screen mesh wick was inserted in the heat pipe. The bottom surface of the heat pipe was heated by an electric heater and the top surface was cooled by circulating coolant. The concern in this study was to enhance the temperature uniformity at the bottom surface of the heat pipe while an uneven heat source up to 900 W was in contact. The temperature distribution over the bottom surface was monitored at more than twenty six locations. It was found that the operating performance of the sodium heat pipe was critically affected by the inner wall temperature of the condenser region where the working fluid may be changed to a solid phase unless the temperature was higher than its melting point. The maximum temperature difference across the bottom surface was observed to be $114^{\circ}C$ for 850 W thermal load and $100^{\circ}C$ coolant inlet temperature. The effects of fill charge ratio, coolant inlet temperature and operating temperature on thermal performance of heat pipe were analyzed and discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1500-1510
• /
• 2007

In recent, rapid and accurate processing for logistics have been required, according as logistics has grown dramatically. Especially, identifying, locating, or tracking objects in ports are important, because ports are gateways to extended markets. In this paper, we describe the design and implementation of a smart tag system for ubiquitous port logistics. Our solution consists of three parts: an active RFID to identify objects, an electronic container seal to charge with security of containers, and a RTLS system to locate objects. Because identification technology for logistics can be read by heterogenous systems, compliance with the international standard is one of the most critical issues. This paper introduces the method to maintain compliance with ISO, and conducts some verifications. In addition, we analyze the system performance such as lifetime, identification rate, and time for multiple tag identification.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.4
• /
• pp.36-48
• /
• 2018

This study surveyed 599 elementary schools in Seoul to provide measures for the quantitative expansion and sustainable operation of environmentally-friendly school garden. Of all schools, 161 schools had formed and were operating school gardens. The total area of school gardens was $166,901m^2$ and the mean area was $131.2m^2$ in elementary, junior high and high schools in Seoul. Meanwhile, the total area of school gardens was $65,493m^2$ and the mean area was $363m^2$ in 161 schools that participated in the survey, indicating $1.15m^2$ per student. Of these schools, 11.8% were operating gardens themselves, while 50.3% were operating gardens that had been newly renovated or environmentally improved by institutional support projects after initially managing gardens themselves. According to the locations of school gardens, mixed-type gardening (a combination of school gardening and container vegetable gardening) accounted for 34.8%, followed by school gardening at 32.9%, container vegetable gardening at 29.2%, and suburb community gardening at 3.1%. Those in charge of garden operations were teachers at 51.6%, comprising the largest percentage. Facilities built when forming the garden included storage facilities for small-scale greenhouses and farming equipment at 26.1%, accounting for the largest percentage. No additional facilities constructed accounted for 21.7%. The greatest difficulty in operating gardens was garden management at 34.2%. The most needed elements for the sustainable operation of gardens were improvement in physical environment and the need for hiring a paid garden, each accounting for 32%. The most important purpose for school gardening was creating educational environments (81.6%). The major source for gaining information on garden management was consultation from acquaintances (67.8%). Schools that utilize plant waste from gardens as natural fertilizers accounted for 45.8% of all schools. Responses to the impact of operating school gardens for educational purpose were positive in all schools as 'very effective' in 63.2% and 'effective' in 36.8%. This study was meaningful in that it intended to identify the current status of the operation of school gardens in elementary schools in Seoul, support the formation of school gardens appropriate for each school with sustainable operation measures, implement a high-quality education program, develop teaching materials, expand job training opportunities for teachers in charge, devise measures to support specialized instructors, and propose the need for a garden management organization.

• Horticultural Science & Technology
• /
• v.32 no.2
• /
• pp.157-164
• /
• 2014

Objective of this research was to develop root media containing expanded rice hull (ERH) and carbonized rice hull (CRH). To achieve this, the physico chemical properties of two materials were analysed and blended with peatmoss (PM) or coir dust (CD) with various ratio. Based on the physical properties of the blended materials, 4 root media were selected for future experiment. After the analysis of pH and EC of the selected root media, the kinds and amount of pre-planting nutrient charge fertilizers (PNCF) incorporated into each root medium were varied, and then, final chemical properties of the root media were analysed. The total porosity (TP), container capacity (CC), and air-filled porosity (AFP) were 81.3%. 39.9%, and 41.4% in ERH and 77.6%, 64.1%, and 13.5% in CRH, respectively. The percentage of easily available water (EAW, from CC to 4.90 kPa tension) and buffering water (BW, 4.91-9.81 kPa tension) were 11.37% and 5.27%, in ERH and 17.26% and 14.28% in CRH, respectively. The pH of ERH was 7.1, but it was extremely high in CRH such as 11.2. The EC and CEC were $1.31dS{\cdot}m^{-1}$ and $12.1meq{\cdot}100g^{-1}$ in ERH and $6.53dS{\cdot}m^{-1}$ and CEC 7.79 $meq{\cdot}100g^{-1}$ in CRH, respectively. The ranges of TP, CC and AFP in 4 selected media (PM + ERH, 6:4, v/v; CD + ERH, 8:2; PM + CRH, 7:3; CD+CRH 6:4) were 89.2-90.3%, 67.3-81.8%, and 8.3-21.9%, respectively. The pHs and ECs in root media containing peatmoss such as PM + ERH (6:4) and PM + CRH (7:3) were 4.0-4.3 and $0.33-0.365dS{\cdot}m^{-1}$, whereas those of CD + CRH were 7.4-7.9 and $1.282dS{\cdot}m^{-1}$. The pHs and ECs, however, analysed before and after the incorporation of PNCF in each root medium were not significant different. This result indicated that the incorporated fertilizers in PNCF to adjust medium pH did not dissolve enough to influence medium pH, but it is very normal in root media containing dolomitic lime and sulfur powder in adjusting pH. The Information obtained in this study may facilitate an effective formulation of root media containing rice hulls.

• The Journal of Society for e-Business Studies
• /
• v.13 no.3
• /
• pp.121-135
• /
• 2008

Railroad logistics transporting freight by train takes charge of 10 or 20 percent of domestic cargos. Railroad logistics users such as transport companies including shippers or Inland Container Depot(ICD) use electronic document(EDI or XML) or input data through WEB to process railroad logistics business. However, as business environments evolving into e-business, it is required to upgrade the legacy railroad logistics process. As the increase of using ebXML-based schema format, it is also needed to improve the electronic documents based on DTD format into those of XML schema format. This study deals with information standard for railroad logistics to improve the railroad logistics business. To this purpose railroad business processes were re-defined through the standard business process modeling methodology. Information model was also derived by defining railroad logistics activities from business process model. And Business Information Entities(BIEs) were defined to design new electronic documents according to the extracted information model. An improved system architecture for railroad logistics was proposed as well. The results of this study will provide an effective and flexible business flow to railroad logistics business.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.499-506
• /
• 2014

This research was conducted to develop root media containing ground and aged pine bark (GAPB) and ground and raw pine bark (GRPB). After analysis of physico chemical properties, the pine barks were blended with peat moss (PM) or coir dust (CD) in various ratios to formulate 12 root media. Then, two out of 12 root media were chosen based on the physical properties for further experiments. The pre-planting nutrient charge fertilizers (PNCF) were incorporated into two root media and chemical properties were analysed again. The total porosity (TP), container capacity (CC), and air-filled porosity (AFP) of GAPB were 78.7%. 39.4%, and 38.3%, respectively, while those of GRPB were 74.7%, 41.2%, and 33.4%, respectively. The percentage of easily available water (EAW, from CC to 4.90 kPa tension) and buffering water (BW, 4.91-9.81 kPa tension) in GAPB were 12.7% and 8.5%, respectively, which were a little lower than the 13.5% and 8.8% in GRPB. The pH and EC were not different significantly, but cation exchange capacity was different between the two pine barks (GAPB: pH 5.26, EC $0.61dS{\cdot}m^{-1}$, CEC $15.7meq{\cdot}100g^{-1}$; GRPB: pH 5.19, EC $0.32dS{\cdot}m^{-1}$, CEC $9.32meq{\cdot}100g^{-1}$). The concentrations of exchangeable cations in GAPB were Ca 0.32, K 0.05, Mg 0.27 and $0.12cmol+{\cdot}kg^{-1}$, whereas those in GRPB were Ca 0.28, K 0.08, Mg 0.25 and $0.09cmol+{\cdot}kg^{-1}$. The concentrations of $PO_4$-P, $NH_4$-N and $NO_3$-N were 485.8, 0.62 and $0.91mg{\cdot}L^{-1}$ in GAPB and 578, 1.00 and $0.82mg{\cdot}L^{-1}$ in GRPB, respectively, when those were analyzed in the solution of the saturated paste. The TP, CC and AFP in the two selected media were 89.3 and 76.3, and 13.0% in PM+GAPB (8:2, v/v) and 88.2, 68.2 and 20.0% in CD+GRPB (8:2), respectively. The pHs and ECs were 3.8 and $0.24dS{\cdot}m^{-1}$ in PM+GAPB which were a little lower than 5.8 and $0.65dS{\cdot}m^{-1}$ in CD+GRPB. However, the pHs analysed before and after incorporation of PNCF in the two root media did not show large differences. This is because the solubility of dolomitic lime is very low, and the pH it is expected to rise gradually when crops are cultivated int he root media. The information obtained in this study should facilitate effective formulation of root media containing pine bark.