• Journal of the Korean GEO-environmental Society
• /
• v.25 no.3
• /
• pp.5-11
• /
• 2024

Promising geological structures for carbon dioxide capture and subsurface storage include aquifers, depleted reservoirs, and gas fields. Among these, aquifers are gaining attention due to their potential for storing significant amounts of carbon dioxide compared to other geological structures. Therefore, there is a growing interest in enhancing carbon dioxide storage efficiency by understanding the characteristics of aquifers and developing technologies tailored to their properties. In this study, the storage efficiency of carbon dioxide injection following surfactant pre-injection into porous micro-models was evaluated. The results indicate that as the concentration of the surfactant solution injected prior to carbon dioxide injection increases, storage efficiency improves. Conversely, lower concentrations require more surfactant injection to enhance storage efficiency. Furthermore, under identical surfactant concentration conditions, the storage efficiency from surfactant pre-injection prior to supercritical carbon dioxide injection is approximately 30% lower compared to surfactant-co-solvent substitution as observed in previous studies. However, under the maximum concentration conditions investigated in this study, similar storage efficiencies to those of previous studies were achieved. These findings are expected to guide concentration determinations for surfactant application aimed at enhancing carbon dioxide storage efficiency in aquifers in future studies.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.255-255
• /
• 2016

Resistive random access memory (ReRAM)는 낮은 동작 전압, 빠른 동작 속도, 고집적화 등의 장점으로 인해 차세대 비휘발성 메모리 소자로써 많은 관심을 받고 있다. 최근에 ReRAM 절연막으로 NiOx, TiOx, AlOx TaOx, HfOx와 같은 binary metal oxide 물질들을 적용하는 연구가 활발히 진행되고 있다. 특히, HfOx는 안정적인 동작 특성을 나타낸다는 점에서 ReRAM 절연막 물질로 적합하다고 보고되고 있다. ReRAM 절연막을 형성할 때, 물리 기상 증착 방법 (PVD)이나 화학 기상 증착법 (CVD)과 같은 방법이 많이 이용된다. 이러한 증착 방법들은 고품질의 박막을 형성시킬 수 있는 장점이 있다. 하지만, 높은 온도에서의 공정과 고가의 진공 장비가 이용되기 때문에 경제적인 문제가 있으며, 기판 또는 금속에 플라즈마 손상으로 인한 문제가 발생할 수 있다. 따라서 이러한 문제점들을 개선하기 위해 용액 공정이 많은 관심을 받고 있다. 용액 공정은 공정과정이 간단할 뿐만 아니라 소자의 대면적화가 가능하고 공정온도가 낮으며 고가의 진공장비가 필요하지 않은 장점을 가진다. 따라서 본 연구에서는, 용액공정을 이용하여 HfOx 기반의 ReRAM 제작하였고 $25^{\circ}C$와 $85^{\circ}C$에서 ReRAM의 동작특성에 미치는 compliance current의 영향을 평가하였다. 실험 방법으로는, hafnium chloride (0.1 M)를 2-methoxyethanol에 충분히 용해시켜서 precursor를 제작하였다. 이후, p-type Si 기판 위에 습식산화를 통하여 300 nm 두께의 SiO2 절연층을 성장시킨 후, 하부전극을 형성하기 위해 electron beam evaporation을 이용하여 10/100 nm 두께의 Ti/Pt 전극을 증착하였다. 순차적으로, 제작된 산화물 precursor를 이용하여 Pt 위에 spin coating 방법으로 1000 rpm 10 초, 6000 rpm 30초의 조건으로 두께 35 nm의 HfOx 막을 증착하였다. 최종적으로, solvent 및 불순물을 제거하기 위해 $180^{\circ}C$의 온도에서 10 분 동안 열처리를 진행하였으며, 상부 전극을 형성하기 위해 electron beam evaporation을 이용하여 Ti와 Al을 각각 50 nm, 100 nm의 두께로 증착하였다. ReRAM 동작에서 compliance current가 미치는 영향을 평가하기 위하여 compliance current를 10mA에서 1mA까지 변화시키면서 측정한 결과, $25^{\circ}C$에서는 compliance current의 크기와 상관없이 일정한 메모리 윈도우와 우수한 endurance 특성을 얻는 것을 확인하였다. 한편, $85^{\circ}C$의 고온에서 측정한 경우에는 1mA의 compliance current를 적용하였을 때, $25^{\circ}C$에서 측정된 메모리 윈도우 크기를 비슷하게 유지하면서 더 우수한 endurance 특성을 얻는 것을 확인하였다. 결과적으로, 용액공정 방법으로 제작된 ReRAM을 측정하는데 있어서 compliance current를 줄이면 보다 우수한 endurance 특성을 얻을 수 있으며, ReRAM 소자의 전력소비감소에 효과적이라고 기대된다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.3
• /
• pp.225-233
• /
• 2019

This study was conduct to investigate the effect of mixed seed sowing and flour blending on the uniformity of flour quality of Korean domestic wheat. Two wheat varieties (Keumkang and Baegjoong) were selected for sowing mixed seeds, and their growth characteristics and flour quality were analyzed. Quality of flour blending with the same varieties was also evaluated. The ratios for mixed seed sowing and flour blending were from 0 to 100% with a 10% increase of interval for each treatment. On increasing the portion of Baegjoong in mixed seed sowing, the heading time was a little delayed, however, yield increased. The results of the flour quality showed lower damaged starch content and sodium carbonate SRC (solvent retention capacity) value for Keumkang than for Baegjoong. Protein quantity by protein content and quality by SDSS (Sodium Dodecyle Sulfate-Sedimentation) volume, lactic acid SRC, and mixograph pattern of Keumkang were superior to those of Baegjoong. Compared with mixed seed sowing, overall quality characteristics of flours with different ratios showed predictable and proportional change by flour blending. This demonstrated the successful application of flour blending, compared with mixed seed sowing, for improving the uniformity of flour quality.

• Weed & Turfgrass Science
• /
• v.3 no.4
• /
• pp.253-261
• /
• 2014

In this study, we investigated several chemical and physical characteristics of 4 weed seed fibers; Hemistepta lyrata (HEMLY), Imperata cylindrica var. koenigii (IMPCK), Metaplexis japonica (METJA) and Typha latifolia (TYPLA). In chemical composition, there were 74 (TYPLA)-88.5% (METJA) of holocellulose, 17 (IMPCK)-24% (METJA) of lignin, 0.22 (METJA)-4.2% (IMPCK) of ash, 2.2 (HEMLY)-7.8% (IMPCK) of hot water extractives and 0.4 (IMPCK)-6.3% (TYPLA) of solvent extractives. Alpha-cellulose proportion to holocellulose was similar among weed seed fibers as 45-48%. The crystallinity index (CI) of raw seed fibers was 53.2 (TYPLA)-65.9% (HEMLY). However, CI of the chemical treated fibers (EDA fibers) was a little increased and showed 61.1 (IMPCK)-71.8% (METJA). The maximum thermal decomposition temperature (MTDT) of the raw seed fibers were 312, 321.8, 331.5 and $341.6^{\circ}C$ in METJA, TYPLA, HEMLY and IMPCK, respectively. But the MTDT of the EDA fibers were 327, 327, 341.7 and $360.0^{\circ}C$ in HEMLY, TYPLA, METJA and IMPCK, respectively. Taken together, they showed a similar or better characteristics compared to the reported or commercial natural fiber resourses. Accordingly, they seem to be practically applicable as renewable resources for a new natural fibers.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.3
• /
• pp.439-445
• /
• 2014

This study aimed to determine the quality characteristics of ginseng seed oil as well as evaluate the efficacy of ginseng seed oil as a food resource. Ginseng seed oil was obtained by different extraction methods; from solvent extraction oil, supercritical fluid extraction oil, and screw pressed extraction oil. Total unsaturated fatty acids were present at 97.72~97.92%. Oleic acid (80.13~81.16%) was the highest, followed by linoleic acid (14.98~15.69%). The total phenol content (mg gallic acid equivalent/100 g oil) was higher in screw pressed extraction oil ($56.32{\pm}1.47$) compared to others. ${\gamma}$-Tocopherol was only present in ginseng seed oil and screw pressed extraction oil showed the highest levels of ${\gamma}$-tocopherol ($5.95{\pm}0.25$ mg/100g oil) among the tested samples. Screw pressed extraction oil showed the greatest oxidative stability with an induction time of 16.58 hours. Acid values and peroxide values of ginseng seed oil increased with increasing storage period. The total phenol and ${\gamma}$-tocopherol contents were higher in screw pressed extraction oil than in other ginseng seed oils, which suggests that screw pressed extraction oil has the greatest oxidative stability.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.1008-1012
• /
• 2008

Nanoscale zero-valent iron(nZVI) is famous for its high reactivity originated from its high surface area and it has received considerable attentions as one of the latest innovative technologies for treating contaminated groundwater. Due to its fine powdery form, nZVI has limited filed applications. The efforts to overcome this shortcoming by immobilizing nZVI on a supporting material have been made. This study investigated the differences of resin-supported nZVI's characteristics by changing the preparation methods and evaluated its reactivity. The borohydride reduction of an iron salt was proceeded in ethanol/water solvent containing a dispersant and the synthesis was conducted in the presence of ion-exchange resin. The resulting material was compared to that prepared in a conventional way of using de-ionized water by measuring the phyrical and chemical characteristics. BET surface area and Fe content of nZVI-attached resin was increased from $31.63m^2/g$ and 18.19 mg Fe/g to $38.10m^2/g$ and 22.44 mg Fe/g, respectively, by switching the solution medium from water to ethanol/water with a dispersant. The reactivity of each material was tested using nitrate solution without pH control. The pseudo first-order constant of $0.462h^{-1}$ suggested the reactivity of resin-supported nZVI prepared in ethanol/water was increased 61 % compared to that of the conventional type of supported nZVI. The specific reaction rate constant based on surface area was also increased. The results suggest that this new supported nZVI can be used successfully in on-site remediation for contaminated groundwater.

• Journal of the Korean Society of Radiology
• /
• v.14 no.2
• /
• pp.85-95
• /
• 2020

The filtration characteristics of H₂O-C₆H₁₂O₆ solution at cell membrane model in renal tubule which irradiated by high energy x-ray(linac 6MV) was investigated. The cell membrane model used in this experiment was a polysulfonated copolymerized membrane of m-phenylene-diamine(MPD) and trimesoyl chloride(TMC)-hexane. They were used to two cell membrane models(CM-1, CM-2). The cell membrane model composed of 0.5 wt% TMC-hexane solution(CM-2) had higher permeate flux(Jv) and rejection coefficient(R) than composed of 0.1 wt% TMC-hexane solution(CM-1). The permeate flux(Jv) and rejection coefficient(R) of H₂O-C₆H₁₂O₆ solution in two cell membrane models(CM-1, CM-2) were increased with increase of pressure drop and effective pressure difference. In this experiment range(pressure 1.5-4 MPa, temperature 36.5 ℃), permeate flux(Jv) of H₂O solvent in irradiated membrane was found to be decreased about 20-30 times than non-irradiated membrane, permeate flux(Jv) and rejection coefficient(R) of H₂O-C₆H₁₂O₆ solution in irradiated membrane was found to be decreased about 2-13 times, about 4-6 times than non-irradiated membrane, respectively. The concentration increase of H₂O-C₆H₁₂O₆ solution at cell membrane model significantly was increased at rejection coefficient(R), was decreased at permeate flux(Jv). As the filtration of H₂O-C₆H₁₂O₆ solution in cell membrane model were abnormal, cell damages were appeared at cell.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.3
• /
• pp.168-173
• /
• 2008

This study was conducted to determine biological characteristics of Acorus calamus L. angustatus by using aqueous, ethanol and methanol extracts from the leaves and the rhizomes of Acorus calamus L. angustatus plants. The highest total phenol contents were found in the extracts from the leaves of Acorus calamus L. angustatus ($68.4mg{\cdot}L^{-1}$) followed by rhizome ($49.3mg{\cdot}L^{-1}$). At $1,000mg{\cdot}L^{-1}$ the free radical scavenging activity of 1, 1-Diphenyl-2-picrylhydrazyl showed the highest activity in the extracts of the leaves and the rhizomes by 86.3% and 86.1%, respectively. Total flavonoid contents at $2,000mg{\cdot}L^{-1}$ extracts showed the greatest amount in the aqueous leaf extracts ($61.1mg{\cdot}L^{-1}$), and the ethanol rhizome extracts ($15.4mg{\cdot}L^{-1}$). Nitrite radical scavenging activity at $2,000mg{\cdot}L^{-1}$ was highest in the methanol extracts from leaves and rhizomes by 75.7% and 77.9%, respectively. Mushroom tyrosinase inhibition activity of leaves and rhizome from the Acorus calamus L. angustatus was very low, showing less than 1.3% regardless of the extract solvent, plant part, and concentration. These results indicated that methanol extracts from leaves exhibited higher biological activities than other extracts from rhizomes.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.297-303
• /
• 2018

With the changing trend of the building construction to high rising and large scaling, the underground structure has been increased, and its usage also increased and variety. Hence, to protect the underground structure against underground water, various water proofing methods has been developed. Among the many water proofing methods, the combined water proofing method using both asphalt seal and sheet has been widely used to secure the sufficient performance and decrease the construction failure. However, during the summer period of extremely high temperature conditions, the asphalt sealing materials were separated and leaked into the structure. Therefore, the aim of the research is to provide the quality standard of asphalt sealing material based on the various temperature changes depending on seasons. According to the experimental results, the temperature of the sealing materials applied on the slab was increased up to $54^{\circ}C$ which was $3^{\circ}C$ higher than the structure temperature of $51^{\circ}C$. Based on the melting test for asphalt sealing materials applied on the outside wall of the structure, in the case of water-dispersing typed materials showed significant melting down due to its slow evaporation and low viscosity. Furthermore, from the accelerated test conducted indoor conditions, a solvent-type and water-dispersing typed materials showed significant melting down due to their low viscosity and melting point in ambient conditions. Based on these results, viscosity and melting point are found as the important factors on asphalt sealing materials' quality, and it is necessary to designate the quantitative level of the viscosity and melting point for quality control.

• Food Science and Preservation
• /
• v.21 no.1
• /
• pp.62-68
• /
• 2014

This study was performed in order to investigate the functional components of 5 kinds of marine algae. We have collected 5 samples of marine algae, such as the sea mustard (Undaria pinnatifida), sea tangle (Laminaria iaponice), sea weed fusiforme (Hizikia fusiforme), green laver (Entetomotpha), laver (Phophyratenera), which have been harvested in Jeollanam-do. In order to examine the functional effects, 5 kinds of marine algae were extracted with hot water ($80^{\circ}C$, 4 hr), ethanol and methanol (R.T., 4 hr), and subcritical water extract (SWE, 3 MPa, $90^{\circ}C$, $150^{\circ}C$, $210^{\circ}C$). A higher yield of extract was obtained through SWE method (3 MPa, $210^{\circ}C$) in all of the samples obtained. The highest total sugar content was 427.4 mg/g in green laver extracted with SWE (3 MPa, $210^{\circ}C$). The content of the SWE total phenolic compounds was higher than that of the water and solvent (methanol, ethanol) extracts. The anti-oxidative activities of the extracts from 5 kinds of marine algae were examined through the DPPH radical scavenging activity test. The SWE (3 MPa, $150^{\circ}C$ and $210^{\circ}C$) of the marine algae was the highest among all of the extracts. As per the results, the SWE of the marine algae contained more functional components and it had a higher antioxidant activity than those of the other extracts. The $IC_{50}$ value of tyrosinase in seaweed fusiforme and laver were higher than those of the other samples. These results strongly support the possible use of marine algae as functional materials.