• Food Science and Biotechnology
• /
• 제14권6호
• /
• pp.836-840
• /
• 2005

Extraction characteristics of Bonus species of Brassica oleracea var. capita and functional properties of corresponding extract were monitored by response surface methodology (RSM). Maximum extraction yield of 44.07% was obtained at ratio of solvent to sample of 27.94 mL/g, ethanol concentration of 24.35%, and extraction temperature of $55.21^{\circ}C$. At ratio of solvent to sample, ethanol concentration, and extraction temperature of 21.11 mL/g, 58.53%, and $68.83^{\circ}C$, respectively, maximum electron-donating ability was 48.44%. Maximum inhibitory effect on tyrosinase was 68.94% at ratio of solvent to sample, ethanol concentration, and extraction temperature of 24.08 mL/g, 10.49%, and $78.71^{\circ}C$, respectively. Superoxide dismutase (SOD) showed maximum pseudo-activity of 24.78% at ratio of solvent to sample of 22.66 mL/g, ethanol concentration of 45.69%, and extraction temperature of $93.81^{\circ}C$. Based on superimposition of four-dimensional RSM with respect to extraction yield, electron-donating ability, and pseudo-activity of SOD, optimum ranges of extraction conditions were ratio of solvent to sample of 20-30 mL/g, ethanol concentration of 35-65%, and extraction temperature of $50-80^{\circ}C$.

• Korean Chemical Engineering Research
• /
• 제57권1호
• /
• pp.5-10
• /
• 2019

본 연구에서는 리튬이온전지 음극활물질로 용매를 사용하여 석유계 피치로 코팅된 인조 흑연의 전기화학적 특성을 조사하였다. 용매로는 n-hexane, toluene, tetrahydrofuran (THF), quinoline이 사용되었다. 제조된 음극소재는 SEM, TEM을 사용하여 코팅 특성을 확인하였으며, 1.0 M $LiPF_6$ (EC:DEC=1:1 vol%) 전해액에서 리튬이차전지의 초기 충 방전, 사이클, 순환전압전류 및 임피던스 테스트를 통해 전기화학적 성능을 조사하였다. 합성된 인조 흑연의 코팅 두께는 약 100-500 nm이며, THF 용매를 사용하여 코팅된 흑연은 다른 용매를 사용하였을 때보다 매끄러운 표면을 가짐을 알 수 있었으며, 또한 낮은 초기 비가역용량(51 mAh/g), 높은 방전용량(360 mAh/g)과 높은 쿨롱 효율(99%)을 확인할 수 있었다.

• Journal of Ceramic Processing Research
• /
• 제18권11호
• /
• pp.810-814
• /
• 2017

Proton exchange membrane fuel cells (PEMFCs) are some of the most efficient electrochemical energy sources for transportation applications because of their clean, green, and high efficiency characteristics. The optimization of catalyst layer morphology is considered a feasible approach to achieve high performance of PEMFC membrane electrode assembly (MEA). In this work, we studied the effect of the solvent on the catalyst layer of PEMFC MEAs fabricated using the electrostatic spray deposition method. The catalyst ink comprised of Pt/C, a Nafion ionomer, and a solvent. Two types of solvent were used: isopropyl alcohol (IPA) and dimethylformamide (DMF). Compared with the catalyst layer prepared using IPA-based ink, the catalyst layer prepared with DMF-based ink had a dense structure because the DMF dispersed the Pt/C-Nafion agglomerates smaller and more homogeneously. The size distribution of the agglomerates in catalyst ink was confirmed through Dynamic Light Scattering (DLS) and the microstructure of the catalyst layer was compared using field emission scanning electron microscopy (FE-SEM). In addition, the electrochemical investigation was performed to evaluate the solvent effect on the fuel cell performance. The catalyst layer prepared with DMF-based ink significantly enhanced the cell performance (1.2 A cm-2 at 0.5 V) compared with that fabricated using IPA-based ink (0.5 A cm-2 at 0.5 V) due to the better dispersion and uniform agglomeration on the catalyst layer.

• 환경위생공학
• /
• 제17권3호
• /
• pp.99-109
• /
• 2002

Charcoal $tube/CS_2$ method are more popularly used than any other in the measurement of the working environment for the exposure evaluation of organic solvent, but it is some weak points that the lower accuracy can be obtained on the polar materials and within the range of the low concentration. Thus solvent desorption method has been developed to make accuracy higher and to overcome some weak points. However, because of high price of adsorption tube for thermal desorption and the short of study on its application to the working environment, it is not popularly used in the domestic industrial hygiene fields. This dissertation aims to develop thermal desorption and adsorption tubes for measuring organic solvents in the working environment, by comparing and analyzing breakthrough condition and adsorption capacity with ACF. Specific surface area of ACF used in this study is wider than the one of AC and micropore of ACF related with adsorption has been developed, and adsorption velocity and adsorption amount are very excellent by linking a pore of surface and an inside well into micropore. 1. Result of analysis on physical characteristics of adsorbent, the specific surface area of ACF was 1.3 times higher than that of AC. Distribution ratio of micropore related to adsorption was 94% on ACF and AC. Result of SEM, micropore of the AC is opened to the surface. In contrast, ACF shows that extremely fast adsorption speed. Because of micropore are exposed on the surface and penetrate through each other. 2. Breakthrough characteristics of adsorbents was not different from slop of breakthrough curve. The effluent concentration reaches 10% of initial concentration($C_{out}/C_{in}=0.1$, break point) of ACF was 30~316min longer than that of AC. Therefore, the adsorption capacities of ACF was 1.1~4.6 times higher than that of AC. ACF can be used as a proper adsorbent for measurement of organic solvent.

• 공업화학
• /
• 제33권4호
• /
• pp.367-372
• /
• 2022

폴리염화비닐(polyvinylchloride, PVC)-tetrahydrofuran (THF) 용액에 PVC 비용매의 첨가와 박막 건조 공정이 PVC 박막에 미치는 영향을 분석하였다. 사용된 비용매는 알코올과 비알코올계로 구성되었으며, 첨가에 따른 PVC 박막의 표면 거칠기와 표면 형상의 차별성에 따른 소수성 성질을 비교하였다. PVC-THF 용액 제조과정에 발생하는 용액 내 기포 함유가 박막의 표면 구조에 미치는 영향이 큼을 확인하였다. 상대적인 고농도 PVC-THF 용액에서 코팅 박막의 정상적 표면 물성을 구현하기 위하여 적절한 박막 건조법의 선택이 요구된다. 알코올계 비용매를 첨가할 경우 과립형 형상의 다공성 표면을 갖는 PVC 박막이 얻어져 초소수성 특성을 보인다. 비용매에 대한 PVC-THF 용액의 부피 비는 코팅 박막의 표면 형상에 영향을 주며, 비용매 첨가량이 많을수록 초소수성 PVC 박막을 형성하는 데 유리하다.

• 한국세라믹학회지
• /
• 제28권1호
• /
• pp.60-66
• /
• 1991

The polymeric alumina sol was prepared by partial hydrolysis of aluminum sec-butoxide reacted with acetylacetone and its characteristics was investigated. The effects of alcohol solvent, acetylacetone, and acid concentration to the sol were investigated. FT-IR and Al27-MASNMR were used to study hydrolysis and polymerization reaction of aluminum complex. Synthesized sol showed the characteristics of polymeric alumina sol. To make a clear polymeric alumina sol, the optimum contents of acetylacetone, H2O and alcohol solvent were 0.4-0.6 mole, 0.25-1.25 mole, 3-5 mole per one mole alkoxide respectively. As a result of the Al27-MASNMR analysis, it was noted that hexa-penta-coordinated Al were main structure.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.95-95
• /
• 2003

In this study, the influences of organic solvent viscosity on absorption properties of split-type micro fiber fabrics is examined with real time absorption measurement device built by our research group recently. And the absorption behavior of these fabrics is analyzed by material, fineness, construction, weight, thickness, and density of fabrics.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2010년도 제3회 국제학회
• /
• pp.79-79
• /
• 2010

In this work a PMTA(poly m-phenylene terephthal amide) polymer was synthesized by using new solvent to produce film composite. This Film composite membrane based on PMTA were prepared with 1,3-phenylenediamine(MPD), terephthaloyl chloride (TPC) and Co-solvent (NMP with added $CaCl_2$) was adopted for synthesize PMTA polymer. A series of synthetic experiments were done, aimed to find the optimum condition of polymerization.

• 한국의류학회지
• /
• 제20권3호
• /
• pp.467-480
• /
• 1996

Interactions between PET POY and solvents were estimated by the changes in microstructure and surface morphology. Changes in microstructure and surface morphology by the solvent treatments were: an increase in crystallite size, a decrease in interplanar spacing, a change in degree of orientation of crystalline region, a change in surface characteristics.

• 멤브레인
• /
• 제10권1호
• /
• pp.30-38
• /
• 2000

투과증발공정에서 polydimethylsiloxane(PDMS)막에 대한 용매의 수착특성과 투과 플럭스를 예측하는 방법을 제시하였다. 이 방법을 이용하여 chloroform, toluene, methoanol, n-butanol의 수착량과 투과 플럭스를 계산하였으며, 계산값과 실험값을 비교하였다. 팽윤을 촉진시키는 정용매(good solvent)인 toluene과 chloroform의 경우 계산된 수착량과 투과 플럭스는 실험값과 잘 일치하였다. 막의 밀도가 작을수록 수착량과 투과 플럭스는 증가하였다. 팽윤을 억제시키는 부용매(poor solvent)인 methanol, n-butanol의 경우는 실험값과 상당한 오차가 있었다. 따라서, 본 미케니즘에 의해 PDMS막에 대한 정용매의 수착량과 투과 플럭스는 실험에 의하지 않고도 이론적으로 예측할 수 있는 가능성을 보여주었다.