• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.4
• /
• pp.47-57
• /
• 2018

Purpose and Methods: Currently, Korea has the lowest fertility rate among OECD countries. It is also true that from the aspect of encouraging childbirth policy, as the use of automobiles has increased, the interest in securing parking spaces has also become more important. However, there are efforts and researches on the supplying parking spaces for the general public in society not to the positive discrimination such as elders or pregnant women. On the other hand, there is a growing need for a dedicated parking space for pregnant women due to the changing social environment and increasing number of female drivers. At this point, proper design of the maternity parking spaces is essential. Therefore, this study is analyzing the characteristics of pregnant women such as measurements and certain actions and case studies of domestic and oversea. Through the analysis of these factors, the following results were derived. Results: First, it was determined that the important factor in the planning of the parking-block for pregnant women was the human body size of pregnant women. And the required dimensions of movement of pregnant women were derived. Second, the dimensions of automobile were analyzed and applied from the most used vehicles in the family composition. Third, after the observations, the status of the parking spaces of the pregnant women and observations showed that the drivers not only the pregnant women but others were using the spaces improperly. Fourth, at certain conditions of the parking spaces, in order to improve the efficiency of the parking spaces, it is necessarily considered that the usage of designated accessible parking spaces can be used together by not only the disabled but also to the passengers who are classified as 'transportation weak' such as pregnant women. Implications: In this study, the researcher will propose the shape and size of the parking-block for pregnant women considering the elements derived above.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.551-557
• /
• 2021

Attached parking lots installation criteria is determined by use, total floor area, etc. according to the Parking Lot Act and local government ordinances. However, with traffic demand increase inconvenience about use of culture and assembly facilities have been raised. When planning number of parking lots for cultural and assembly facilities, legal parking lots and unit parking lots are used, but this causes inconvenience and traffic problems on the surrounding roads, because reality and convenience are not considered. Therefore, this study intend to present an realistic number of parking lots calculating equation for movie theater in Gwangju Metropolitan City. After investigating number of parking lots, number of screens, number of seats, total floor area, bus route and illegal parking for a cultural facility in Gwangju Metropolitan City, prediction model for calculating number of parking lots was presented using SPSS regression analysis. As a result of comparing prediction model and unit method, the prediction model was be closer actual cumulative parking space, so prediction model verification was completed. Based on the model verified in this study, Realistic number of parking lots will be installed. However, due to limitations of research on specific areas, research on various facilities should continue in consideration of regional, population, and urban characteristics

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3060-3070
• /
• 2015

Recently, novice driver or weak drivers was difficult to understand the movement characteristics of the car and are immature sense of width and length of the car according to various each driver's sex and age, model. To complement this problem, the use of rear sensor and the camera is increased. And the parking assistance system that improves the convenience of parking the driver is being developed. Accordingly, parking guide system is needed to reflect the difference in the steering angle and correct the error distance. In this study, it is proposed that the turning radius during backward by complementing the existing Ackerman Jentaud type. And it develops more accurate parking guideline to be able to generat algorithm by applying the formula to propose a steering wheel angle sensor value derived through the handle.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.2
• /
• pp.44-53
• /
• 2023

Recently, serious parking problems are occurring due to the difficulty of securing sufficient parking space, and it may lead to other traffic or social problems. In order to solve the parking problem in areas and districts beyond a certain range, a study on-roads and off-street parking lots reflecting regional characteristics is necessary. Therefore, this study establishing a parking demand calculation model for use as a basic study in establishing on-road and off-road characteristics. In order to conduct the study, Dong-fu, Daegu Metropolitan City was divided into dongs, and parking facilities and parking demand were investigated. The survey time was divided into daytime and nighttime on weekdays, and the types of vehicles were divided into three types: passenger car, small trucks and buses, large trucks and buses. As explanatory variables for calculating parking demand, the total floor area of buildings for each of six purposes was used, including detached houses, apartment houses, neighborhood living facilities, cultural and assembly facilities, business facilities, and sales facilities. As a result of the correlation analysis, among the six explanatory variables, the total area of neighborhood living facilities showed a significant correlation with on- and off-street parking demand. A regression analysis model was constructed using the total area of neighborhood living facilities as an explanatory variable, and statistically significant results were obtained.

• Information Systems Review
• /
• v.25 no.4
• /
• pp.113-130
• /
• 2023

Due to economic development and increasing gross national income, the number of automobiles continues to rise, leading to a serious issue of illegal parking due to limited road conditions and insufficient parking facilities. Illegal parking causes significant inconvenience and displeasure to people and can even result in accidents and loss of lives. The severity of accidents and their consequences, related to the growing number of vehicles and illegal parking, is escalating, particularly in the metropolitan areas. Consequently, efforts are being made to address this problem as a cause of social issues and come up with measures to reduce illegal parking. In particular, half of the public complaints in the metropolitan area are related to illegal parking, and the highest physical and human damage occurs in Gyeonggi. Thus, this study aims to use machine learning techniques based on data related to illegal parking in Suwon city, Gyeonggi, to categorize regional characteristics and propose effective measures to crack down on illegal parking. Additionally, practical, social, policy, and legal measures to decrease illegal parking in the metropolitan area are suggested. This study has academic significance in that it solved the problem of illegal parking, which is mentioned as one of the social problems that cause traffic congestion, by classifying regional characteristics using K-prototype, a machine learning algorithm. Furthermore, the results of this study contribute to practical and social aspects by providing measures to decrease illegal parking in the metropolitan area.

• Journal of Power System Engineering
• /
• v.16 no.2
• /
• pp.5-10
• /
• 2012

The parking brake is one of the essential units embedded in track driving motor for forward and backward motion of an excavator. It is composed of multi-friction discs. When the hydraulic motor stops, the multi-friction discs closely stick to the facing discs by acting of multi-spring forces. So, the friction forces generate the braking force by compressing the cylinder barrel of hydraulic motor. In this study, we combined the multi-friction discs to two kinds of spring which have different spring force, and the maximum torque measured at the rotational starting point of hydraulic motor through gradually increasing the rotational torque of load side hydraulic motor by use of 1 and 2 sheets of friction plates. And, under this experimental condition, the maximum coefficient of static friction and the characteristics of paper friction sheet were analyzed. The obtained experimental results will be applied to the design of parking brake system for producing large size excavator in the 85-ton weight class.

• Journal of the Korean Society of Safety
• /
• v.37 no.5
• /
• pp.33-41
• /
• 2022

As the number of automobile registrations increases yearly, parking spaces that are located in downtown areas are increasing, and mechanical parking facilities are also increasing. Therefore, there is a high risk of accidents when installing and repairing a mechanical parking facility. In the preceding six years (from 2012 to 2018), the statistics that pertain to accidental disasters indicated that a total of 137 disaster victims were generated by the construction sector, 33 accidents occurred, and 10 people died. However, only the safety management items pertaining to accidents that occur during maintenance work and the use of the installed mechanical parking facilities are being studied; furthermore, there is no ongoing research with respect to the risk management that is conducted at the construction site. In 2017, the Korea Occupational Safety and Health Agency (KOSHA) announced the "Guidelines for Safe Installation and Maintenance of Mechanical Parking Equipment"; however, it is a safety guideline that is limited to the installation of basic protective equipment and to facility installation. There is no model for mechanical parking facilities that is indicated in the "Risk Assessment Model by Construction Industry Type", which is issued by the Safety and Health Corporation and is widely utilized for risk assessment in the construction industry; moreover, elevator installation work CODE N0: 22 is the only major example of a disaster. In this study, "risk assessment through a focus group interview" was performed, and data was derived from the "risk assessment of Article 41 (2) of the Industrial Safety and Health Act", which reflects the characteristics of the construction industry based on AHP analysis. The results of this study can be utilized for the risk assessment that is conducted during the construction stage of mechanical parking facilities.

• Journal of Power System Engineering
• /
• v.16 no.6
• /
• pp.66-72
• /
• 2012

The parking brake embedded in track driving motor for driving an excavator is composed of wet type multi-friction discs. This type parking brake can be designed more compact because the combination of some sheets of friction discs generate great braking power, and also it has good braking characteristic and long life time because it works in the oil. In this study, we analyzed torque characteristic of the parking brake through simulations and performed experiments by use of 3-kinds of paper friction sheet manufactured by different pressing methods. And, we compared the maximum static friction coefficient and torque characteristic with the simulation results and confirmed the optimal manufacturing process through this result.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.549-559
• /
• 2014

The rapid expansion of cities led to the shortage of housing in urban areas. The government compensated for this shortage through large scale residential developments that increased the housing supply. The supply of condominium apartments remains above 83% of the entire housing supply, and the proportion of apartments are at a steady increase, at about 50%. Due to the increase, illegally parked cars resulting from the shortage of parking spaces within the apartment complex have become increasingly problematic as they block the transit of emergency vehicles, and heighten the tension among neighboring residents in obtaining a parking space. Especially, the future residents are considered to plan the parking based on the estimated demand for parking. However, the parking unit method utilized to estimate the parking demand accounts for the exclusive use of space, which is believed to be far from the parking demands in reality. The reason for this discrepancy is that, as the number of households decrease, and area of exclusive space is expanded, the planned parking increases. On the other hand, when the number of households increase, and the area of exclusive space is reduced, the planned parking decreases, thus methods to recalculate the parking units based on estimated parking demand is an urgent concern. To estimate the parking units based on condominium apartments, this study first examined the existing research literature, and appointed the field of investigation to collect the necessary data. In addition, field study data and surveys collected and analyzed, in order to identify the problems underlying parking units, and problems regarding the current traffic impact assessment parking unit calculation method were deduced. Through identifying the influential factors on parking demand estimates, and performing a factorial analysis based on the collected data, the variables were selected in relation to the parking demand estimates, to develop the parking unit estimate model. Finally, through comparing and verifying the existing traffic impact assessment parking unit estimate against the newly developed model using collected data, a far more realistic parking unite estimate was suggested, reflecting the characteristics of the residents. The parking unit estimate model developed in this study is anticipated to serve as the guidelines for future parking lot legislature, as wel as the basis to provide a more realistic estimate of parking demands based on the resident characteristics of an apartment complex.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.326-328
• /
• 2021

The use of shared electric kickboards that can move quickly within a short distance at a relatively low price is increasing significantly. In this paper, we propose a system for recognizing incorrect parking of an abandoned shared kickboard by applying deep learning-based object recognition technology. In this paper, a model similar to CNN was created separately considering the characteristics of the experimental data, and it was shown that a recognition rate of 60% was obtained through the experiment.