• Journal of Radiation Industry
• /
• v.7 no.2_3
• /
• pp.101-108
• /
• 2013

To develop new varieties of rapeseed (Brassica napus L.), the seeds of three varieties, 'Naehan', 'Tammi', and 'Halla' were irradiated with proton ion beams and gamma rays with 0 to 2,000 Gy. We had selected 9 lines in $M_5$ generation, and their useful characteristics were investigated by progressing from $M_6$ to $M_7$ generation for checking uniformity and stability. The 9 lines selected in $M_5$ generation were maintained their characteristics in terms of flowering date, maturing date, and plant height through $M_6$ to $M_7$ generations. Especially, 2 lines of NP600-1-1-198-2-1 and NP1000-13-2-362-4-1 selected in $M_5$ generation derived from 'Naehan' had characteristics of early maturity and shorter stem than original variety, and they also were maintained characteristic of early maturity such as 10~11 days earlier flowering date and 6~9 days earlier maturing date through $M_6$ to $M_7$ generations. For stem length, they showed characteristics of shorter stem in 2 lines of NP600-1-1-198-2-1 line and NP1000-13-2-362-4-1 line about 16%, 25% shorter stem than original variety respectively through $M_6$ to $M_7$ generations. Furthermore, some characteristics of 2 lines compared to the original variety were similar or higher in weight of 1,000 seeds, number of branches per plant, number of siliqua per panicle, number of seeds per silique, oil contents, and oleic acid contents. The line with large and plump flowers selected in $M_5$ generation also showed large and dark yellow flowers through $M_6$ to $M_7$ generations. The lines with High oleic acid and low saturated fatty acid contents selected in $M_5$ generation were maintained characteristics through $M_6$ to $M_7$ generation and these useful characteristics were expected for developing a new variety for bio diesel uses.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1991.10a
• /
• pp.29-32
• /
• 1991

Non-volatile SNOSFET memory devices using CMOS 1Mbit design rule(1.2$\mu\textrm{m}$), whose channel width and length are 15${\times}$1.5$\mu\textrm{m}$, 15${\times}$1.5$\mu\textrm{m}$, 2.0${\times}$15$\mu\textrm{m}$ and length are 15${\times}$1.7$\mu\textrm{m}$, respectivley, were fabricated. And the transfer, Id-Vd and switching characteristics of the devices were investigated. As a result, the 15${\times}$1.5$\mu\textrm{m}$ device was good in the transfer characteristics and the switching characteristics were favourable, which had $\Delta$V$\sub$TH/=6.3V by appling pulse voltage of V$\sub$w/=+34V, Tw=50msec.

• Electrical & Electronic Materials
• /
• v.8 no.1
• /
• pp.27-34
• /
• 1995

The analysis of nonlinear equivalent circuit and the resonance characteristics of input current and output voltage were simulated, and their electrical properties are discussed in the transverse-type piezoelectric ceramic transformer. The nonlinear resonance characteristics of input current and output voltage showed by the thermal effect due to a higher driving current, the nonlinearity increased greatly as driving current increased. When load resistor was 100[M.ohm.], the nonlinear coefficient was -1.3. The nonlinear resonance curve of input current and output voltage for a variation of input voltage and load resistor agreed with the discussed theory. The output voltage increased nearly proportioned to input voltage when load resistors were below 50[M.ohm.], the voltage step-up ratio decreased when a load resistor was 100[M.ohm.] and their maximum value was 950.

• Journal of Information Technology Services
• /
• v.14 no.4
• /
• pp.171-184
• /
• 2015

Nowadays, mobile commerce is having an increasingly profound impact on our daily lives, and offer interesting and advantageous new services. Mobile payment is an emerging and important application of mobile commerce in smart work, enabling users to use their mobile devices (especially mobile phones) for paying goods and services wherever they go. The appearance of m-payment is expected to provide us a convenient and bright future to enjoy. That is the common trend on over the world, but in Vietnam, although the number of smart phone users has been increasing rapidly, the adoption of m-payment system still didn't succeed completely. The research reviewed literature regarding mobile payment services, analyzed the impact of customer characteristics and system characteristics on m-payment adoption in Vietnam. To analyze the adoption behaviors of m-payment users, m-payment research model which consists of three customer-characteristics (m-payment trust, personal innovativeness, m-payment knowledge) and four m-payment system characteristics (mobility, reachability, convenience, compatibility) were studied. The results indicate that perceived usefulness, trust, and compatibility are the important predictors to the intention to use m-payment. This study will assist m-payment services suppliers in implementing appropriate business models and service strategies to successfully attract customer to use m-payment in Vietnam, allowing managers to exert appropriate investment, time, and effort for m-payment system development in designing smart working.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.2
• /
• pp.129-134
• /
• 2012

We analyzed the movement and response time of charged particles according to particle-inserting methods to understand the variation of quantity of q/m of charged particles, which is a very important factor in electrical and optical characteristics of the charged particle type display, such as lifetime, response time, contrast ratio, reflectivity, etc. For our study we used white and black charged particles of which diameter is $20{\mu}m$, prepared pieces of ITO(indium tin oxide) coated glass substrate, and formed ribs on the glass substrates. The width of a rib is $30{\mu}m$ and the cell size is $220{\mu}m{\times}220{\mu}m$. As the particle-inserting methods, the white and black charged particles were respectively inserted into a front and a rear panel with a very small electric field and also the mixture of the white and black charged particles were inserted into a rear panel. As a result of the driving characteristics of charged particles, the factors about variation of quantity of q/m according to the particle inserting method was experimentally demonstrate, showing very different driving voltage, response time, the particle movement, etc.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.92-97
• /
• 2002

By changing the excess air ratio which affects strongly to the combustion characteristics, the flame stability range in the metal fiber burner were found and the range of the blue flame male and radiant mode were distinguished by direct photography. The results in our experiments for the flame stability zone were from a=1.4($354 KW/m^2$) to a=2.06($240 KW/m^2$), and then the blue flame mode zone was form a=1.87($266 KW/m^2$) to a=2.06($240 KW/m^2$) and the radiant mode one was form a=1.4($354 KW/m^2$) to a =1.78($278 KW/m^2$). And the flame was not fired when a is less than the lean condition a=2.45($202 KW/m^2$).

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.2
• /
• pp.175-182
• /
• 1990

In order to investigate the conduction characteistics of the biaxially oriented polypropylene film, several measurements have been carried out in the range of temperature between 5['c] and 25['c] as well as the field intensity between 10[MV/m] and 300[MV/m]. The whole range of the characteristics observed at 15['c] appears to be divided into five regions` the Ohmic conduction region due to ionic carrier below 40[MV/m], the region from 40[MV/m] to 70[MV/m] in which the conduction mechanism is attributed to Poole-Frenkel effect, the region from 70[MV/m] to 82[MV/m] in which the negative resistance characteristics are observed, then the region from 82[MV/m] which is dominated by Schottky effect and finally, the region from 240[MV/m] up to the point where dielectric breakdown occurs in which the mechanism is based on Flowler-Nordheim theory.

• BMB Reports
• /
• v.31 no.6
• /
• pp.548-553
• /
• 1998

A minor anionic isoperoxidase named $A_{3n}$, was isolated from Korean radish (Raphanus sativus L.) root. Purification of the enzyme was accomplished by CMcellulose chromatography, DEAE-Sephacel chromatography, and Sephadex G-75 gel filtration. The enzyme was a glycoprotein with molecular weight of approximately 31,000 as determined by SDS-PAGE and 33,000 by Sepadex G-150 gel filtration, which is by far the smallest among the reported isoperoxidases. The pI value was 3.5. The optimum pH of the enzyme was 6.5 for guaiacol and $H_2O_2$, and the $K_m$ values for guaiacol and $H_2O_2$ were 13.3 mM and 1.5 mM, respectively. Kinetic studies with various substrates revealed that only A3n, unlike other isoperoxidases from radish, did not use scopoletin as a substrate and had very low $K_m$ value of 0.25 mM for ferolic acid among naturally occurring phenolic substrates.

• Journal of Korean Academy of Nursing Administration
• /
• v.4 no.1
• /
• pp.5-17
• /
• 1998

The Purpose of this study is to find out differences among the leader's traits on the hierarchy of Nurse managers in Nurse system of the hospital. In this study 152 managers over head nurse working in 6 University hospitals and 5 general hospitals were selected and the questionary paper answered by them was collected from 1st to 30th in September in 1997. The measuring instrument used in this study is the one integrated and classified by Stogdill (1981), which nurse professor and 2 students of the master's course translated and modified with myself. And its validity was verified through making a test on 130 nurses. The measuring instrument used in this study is made up of 4 items about physical characteristics, 3 items about social background, 4 items about intelligence and ability, 17 items about personaity, 6 items about task-related characteristics, 9 items about social characteristics and 8 items about general background in the triats of leader. And this instrument is made to be marked using five point Likert type. It's reliability is Cronbach's Alpha =.93. The data for study were analyzed through SPSS/PC+ The result of this study are as follows: 1. The order in importantly perceptible degree of the leader's traits showed like these: the intelligence and ability (M=4.683), the task-related characteristics (M=4.605), the personality (M=4.39), the social characteristics (M=4.327), the social back-ground (M=4.056), the physical characteristics (M=3.601). 2. The order in degree to percept the importance of 44 detailed items of the leader's traits showed like these: the judgement and decisiveness (M=4.967), the sense of responsibility (M=4.904), the activity and energy (M=4.796), the self-confidence (M=4.776), the creativity (M=4.748), the intelligence (M=4.743), the responsibility in the pursuit of objectives (M=4.743), the enthusiasm (M=4.717), the objectivity (M=4.704), the moral sense and ethical conduct (M=4.704), the ability to enlist cooperation (M=4.694), the strength of conviction (M =4.678), the enterprise (M=4.691), the administrative ability (M=4.678) and the cooperativeness (M=4.638) 3. As the result of analyzing the leader's trait differences on the hierarchy of nurse managers in six factors of the leader's traits, the social background showed the meaningful differences(F=4.983, P=0.008). 4. As the result of analyzing the leader's traits defferences made from the upper first to 15th rank among the detailed items of the leader's trait factors on the heirarchy of nurse managers, the meaningful defferences appeared in the following items: the objectivity(F=3.413, P=0.033), the creativity (F=3.550, P=0.031), the sense of responsibility(F=3.345, P=0.049), and the administrative ability (F=3.363, P=0.037). 5. As the result of analyzing the leader's trait factors in general background, only the social background of 6 leader's trait factors showed the meaningful differences according to the working place (F=4.057, P=0.008). The study shows that we should consider the above leader's trait factors in selecting nurse managers and that we should develop the educational program for hierarchy of nurse managers urgently.

• Korean Chemical Engineering Research
• /
• v.55 no.5
• /
• pp.698-703
• /
• 2017

Bubble flow characteristics in fluidized beds were analyzed by CPFD simulation. A fluidized bed, which had the size of $0.3m-ID{\times}2.4m-high$, was modeled by commercial CPFD $Barracuda^{(R)}$. Properties of bed material were $d_p=150{\mu}m$, ${\rho}_p=2,330kg/m^3$, and $U_{mf}=0.02m/s$. Gas was uniformly distributed and the range of superficial gas velocity was 0.07 to 0.16 m/s. Two other geometries were modeled. The first was a three-dimensional model, and the other was a two-dimensional model of $0.01m{\times}0.3m{\times}2.4m$. Bubble size and rising velocity were simulated by axial and radial position according to superficial gas velocity. In the case of three-dimensional model, simulated bubble rising velocity was different from correlations, because there was zigzag motion in bubble flow, and bubble detection was duplicated. To exclude zigzag motion of bubble flow, bubble rising velocity was simulated in the two-dimensional model and compared to the result from three-dimensional model.