• 제목/요약/키워드: Characteristics Equation

검색결과 4,305건 처리시간 0.032초

대구획 경지정리지구의 배수지거 수리특성 (An Analysis of Hydraulic Characteristics of Drainage Sub-Canal at Large-Sized Paddy Fields)

  • 강민구;박승우
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2001년도 학술발표회 발표논문집
    • /
    • pp.74-79
    • /
    • 2001
  • A one-dimensional flood routing model was formulated to simulate the flood flow of drainage sub-canal using the continuity equation of paddy field and the momentum and continuity equation of drainage sub-canal. The model was applied for evaluating the hydraulic characteristics of drainage sub-canal at large-sized paddy fields. The model applicability was evaluated with field data and the simulated results were in good agreement with the observed data.

  • PDF

선대 평판 전기 집진기의 V-I 특성 계산 (Computation of V-I characteristics in wire-plate electrostatic precipitators)

  • 김길신;심재학;고광철;강형부
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1997년도 하계학술대회 논문집 E
    • /
    • pp.1675-1677
    • /
    • 1997
  • In this paper we study the voltage-current characteristics inside the wire-plate precipitators by numerically solving the Poisson's equation and current continuity equation. The effects of a wire size, wire-wire spacing, wire-plate spacing and effective mobility have been considered.

  • PDF

MOVING MAGNET형 LDM의 설계해석 (Design and Analysis of Moving Magnet Type LDM)

  • 백수현;박영호;이준철;함중걸
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1993년도 하계학술대회 논문집 B
    • /
    • pp.951-953
    • /
    • 1993
  • This study presents a design methods for linear DC motor and the designed motor is analyzed. To design the linear DC motor, magnetic circuit design is introduced and characteristics of LDM is analyzed by using the voltage equation aid dynamic equation. And the thrust characteristics are investigated using MEXWELL 2D.

  • PDF

등가렌즈의 해석적인 변환방법에 대한 연구 (A Study for an Analytic Conversion between Equivalent Lenses)

  • 이종웅
    • 한국광학회지
    • /
    • 제23권1호
    • /
    • pp.17-22
    • /
    • 2012
  • 등가렌즈는 전체굴절능과 주변광선에 대한 근축광학적 특성은 같지만 축상두께가 다른 렌즈이다. 이 연구에서는 두꺼운 렌즈를 등가렌즈로 변환하는 해석적인 방법에 대하여 연구하였고, 변환조건이 2차방정식의 해로서 주어짐을 보였다. 모든 두꺼운 렌즈는 유일해인 경우를 제외하면 이 2차방정식의 두 실근중의 하나이기 때문에 반드시 공액해가 1개 존재한다. 이 공액해는 축성 두께와 근축광학적 특성은 같지만 모양과 수차특성은 다르다. 예제 렌즈의 등가렌즈 변환을 통하여 등가렌즈와 이에 대응하는 공액해의 특성을 살펴보았다.

An Accurate Model of Multi-Type Overcurrent Protective Devices Using Eigensystem Realization Algorithm and Practice Applications

  • Cheng, Chao-Yuan;Wu, Feng-Jih
    • Journal of Electrical Engineering and Technology
    • /
    • 제11권1호
    • /
    • pp.9-19
    • /
    • 2016
  • Accurate models of the characteristics of typical inverse-time overcurrent (OC) protective devices play an important role in the protective coordination schemes. This paper presents a novel approach to determine the OC protective device parameters. The approach is based on the Eigensystem Realization Algorithm which generates a state space model to fit the characteristics of OC protective devices. Instead of the conventional characteristic curves, the dynamic state space model gives a more exact fit of the OC protective device characteristics. This paper demonstrates the feasibility of decomposing the characteristic curve into smooth components and oscillation components. 19 characteristic curves from 13 typical and 6 non-typical OC protective devices are chosen for curve-fitting. The numbers of fitting components required are determined by the maximum absolute values of errors for the fitted equation. All fitted equations are replaced by a versatile equation for the characteristics of OC protective devices which represents the characteristic model of a novel flexible OC relay, which in turn may be applied to improve the OC coordination problems in the sub-transmission and distribution systems.

박막의 열물성 측정 및 광학특성 연구 (A Study on Thermal Conductivity Measurement and Optical Characteristics of Thin Films)

  • 권혁록;이성혁
    • 전기학회논문지
    • /
    • 제56권12호
    • /
    • pp.2202-2207
    • /
    • 2007
  • The present article investigates experimentally and theoretically thermal and optical characteristics of thin film structures through measurement of thermal conductivity of Pyrex 7740 and reflectance in silicon thin film. The $3{\omega}$ method is used to measure thermal conductivity of very thin film with high accuracy and the optical characteristics in thin films are studied to examine the influence of incidence angle of light on reflectance by using the CTM(Characteristics Transmission Method) and the 633 nm He-Ne laser reflectance measurement system. It is found that the estimated reflectance of silicon show good agreement with experimental data. In particular, the present study solves the EPRT(Equation of Phonon Radiative Transport) which is based on Boltzmann transport equation for predicting thermal conductivity of nanoscale film structures. From the results, the measured thermal conductivity is in good agreement with the previous published data. Moreover, thermal conductivities are estimated for different film thickness. It indicates that as film thickness decreases, thermal conductivity decreases substantially due to internal scattering.

중학생들의 이온화식에 대한 지식상태분석 (Knowledge State Analysis of Ionic Equation for Middle School Students)

  • 윤회정;이윤하;김영신
    • 대한화학회지
    • /
    • 제59권6호
    • /
    • pp.499-507
    • /
    • 2015
  • 본 연구의 목적은 이온화식 작성에 대한 중학생들의 이해 정도를 알아보는 것이다. 서울시 소재 중학교 한 곳에 재학중인 3학년 학생 219명이 연구에 참여하였다. 6차시에 걸친 ‘전해질과 이온’ 단원의 수업이 끝난 후, 이온화합물의 이온화 과정을 이온화식으로 표현하도록 구성한 서술형 검사를 실시하였다. 검사 결과를 분석하여 이온화합물의 구성 특성에 따라 이온화식 서술에 대한 정답률을 파악하였으며, 이온화식 표현과 관련된 지식상태를 토대로 이온화식 표현의 위계 관계를 분석하였다. 연구 결과는 다음과 같다. 첫째, 이온화합물을 구성하는 양이온과 음이온의 종류, 전하량과 구성 개수를 바탕으로 이온화합물들을 여섯 집단으로 분류하고 집단의 특성에 따라 학생 응답을 분석한 결과 정답률에 차이가 나타났다. 둘째, 지식 상태 분석 결과 이온화합물을 구성하는 양이온과 음이온의 종류와 전하량, 구성 개수를 알아내어 이온화 과정을 식으로 표현하는 지식상태가 구조화되어 있음을 알 수 있었다. 연구 결과를 바탕으로 효과적인 이온화식 학습 전략의 설계를 위한 시사점을 제안하였다.

컴퓨터 하드 디스크 드라이브 스핀들 모터에 사용되는 곡면 유체 동압 베어링 해석 (Analysis of the Fluid Dynamic Bearings with Curve Surfaces in the Spindle Motor of a Computer Hard Disk Drive)

  • 김학운;장건희
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2008년도 추계학술대회논문집
    • /
    • pp.401-406
    • /
    • 2008
  • This paper proposes a method to calculate the static characteristics of the FDBs with the curved surface. The general Reynolds equations are derived for the curved surfaces in the ${\theta}s$ plane. And the Reynolds equation is transformed to the finite element equations by considering the continuity of pressure and flow at the interface between the curved, journal and the thrust bearings. It also includes the Reynolds boundary condition in the numerical analysis to simulate the cavitation phenomenon. The static characteristics of the coupled journal and conical bearings were investigated due to the variation of conical angle. It shows that the conical angle is one of the important design parameters affecting the static and dynamic characteristics of FBBs.

  • PDF

전자력과 유동방정식을 결합한 전도성 용융금속의 유동특성 해석 및 실험 (Analysis of Flow Characteristics and Experiment of Conductive Liquid Metal Coupling Lorentz Force with Fluid Equation)

  • 전문호;이석원;김창업
    • 전기학회논문지
    • /
    • 제58권7호
    • /
    • pp.1329-1335
    • /
    • 2009
  • This paper presents the flow characteristics in the fluid circulation loop using the tubular type linear induction motor(TLIM) electromagnetic pump. A TLIM pump was designed using the equivalent and genetic algorithm for the flow system of 40[1/min]. The flow characteristics are analyzed by coupling the Maxwell equations with the Navier-Stokes equation. The analysis algorithm also takes account of the effects of the thrust. The flow characteristics are analysed with the proposed method and compared with the commercial program and experiment and discussed.

노즐용삭을 고려한 SF6 가스차단기 노즐의 열적회복특성 해석 (Analysis of Thermal Recovery Characteristics for Nozzle of SF6 GCB Considering Nozzle Ablation)

  • 이병윤;송기동;정진교;박경엽
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제54권2호
    • /
    • pp.76-82
    • /
    • 2005
  • In this paper, a method for analyzing the thermal recovery characteristics of the nozzle of gas circuit breaker was described. In order to obtain thermal recovery characteristics, the transient simulation of SF6 arc plasma within the nozzle was carried out. In particular, the nozzle ablation was taken into account by simultaneously solving the PTFE concentration equation with the governing equations such as continuity, momentum and energy equation. After that, post arc current calculation was performed with the rate of rise of recovery voltage changed. From the calculated post arc current, it was possible to suggest the thermal recovery characteristics of the nozzle of gas circuit breaker.