• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.608-611
• /
• 2005

As the optical communication industry is developed, the demand of optical communication part is increasing. $ZrO_2$ ceramic ferrule is very important part which can determines the transmission efficiency and information quality to connect the optical fibers. In general $ZrO_2$ ceramic ferrule is manufactured by grinding process because the demands precision is very high. For the precision grinding machining, it is very important that the error of feeding system is improved. Therefore, we estimated the dynamic characteristics in feeding system of ultra precision co-axial grinding machining system. Then, we performed the machining characteristics experiment.

• 한국기계가공학회지
• /
• 제20권3호
• /
• pp.16-23
• /
• 2021

The fracture characteristic of the bonded interface under the application of a sliding load to a double cantilevered specimen manufactured using lightweight material was examined. Inhomogeneously bonded materials such as Al6061-T6, CFRP, and CFRP-Al were employed. In the experiment, the specimen was loaded on both directions by applying a shearing load to the bonding interface. The experimentally obtained stress, specific strength and energy release rate values were examined. CFRP exhibited excellent specific strength. The experimental results demonstrated that the inhomogeneous bonded material CFRP-Al exhibited an overall high performance in comparison with the single materials.

• 한국정보시스템학회지:정보시스템연구
• /
• 제27권1호
• /
• pp.153-169
• /
• 2018

Purpose Since human brains catch images faster than texts or numbers, infographics has been widely used in business in the form of "information dashboard" to enhance the efficiency of decision-making. Groupware, however, has neglected the adoption and use of infographics, in particular, in the idea generation process. Given that an overall performance of groupware-based idea generation is no better than that of the (paper-and-pencil-based) Nominal Group Technique, Jung et al. (2010) adopted the notion of infographics in the form of performance feedback to solve the productivity paradox. With the consistent results, which demonstrate beneficial effects of infographics on performance enhancement, an interesting observation that groups with the bar chart treatment performed better than groups with the dot chart treatment was made. The main purpose of this study was to find if there were a performance consistency between the outcomes from the previous study and the outcomes from the current study. Design/methodology/approach In experiment 1, we employed the same system used in the previous study (i.e., Jung et al., 2010). As individuals' contributions accumulated, the mechanism visually displayed individuals' performances two-dimensionally in the form of a bar chart or a dot chart. Then, we compared the performance outcomes from this study to the outcomes from previous study (i.e., Jung et al., 2010). In experiment 2, we modified the performance graph to test the effect of "playfulness" on performance by converting dots to car images. Then, we compared the performance outcome from experiment 2 to the outcomes from experiment 1. Findings Just like our interesting (and unexpected) finding in Jung et al.'s study (2010), the outcome confirmed a consistent superior performance of a bar chart. This implies that a bar chart is a better choice when stimulating performance with a visual aid in the context of groupware-based idea generation. Although a bar chart was criticized in a way that errors of length-area judgments are 40 ~ 250% greater than those of positional judgments along a common scale, such illusion turned out to be facilitating upward performance comparison better. Regarding Experiment 2, the outcome showed that the revised-dot graph is as good as the bar graph in terms of quantity and quality score of ideas. We attribute the performance enhancement of the resized-dot to the interaction between the motivational characteristic and the situational characteristic of playfulness because individuals in the revised-dot graph treatment performed better than individuals in the dot graph treatment. Given the order of performance (Bar >= Revised Dot > Dot) that the revised-dot treatment performed the same as (or lower than) the bar treatment, an additional research is warranted to reach to a consistent outcome.

• Archives of Plastic Surgery
• /
• 제43권2호
• /
• pp.160-171
• /
• 2016

Background The objective of this study was to assess the attractive facial features of the Indian population. We tried to evaluate subjective ratings of facial attractiveness and identify which facial aesthetic subunits were important for facial attractiveness. Methods A cross-sectional study was conducted of 150 samples (referred to as candidates). Frontal photographs were analyzed. An orthodontist, a prosthodontist, an oral surgeon, a dentist, an artist, a photographer and two laymen (estimators) subjectively evaluated candidates' faces using visual analog scale (VAS) scores. As an objective method for facial analysis, we used balanced angular proportional analysis (BAPA). Using SAS 10.1 (SAS Institute Inc.), the Turkey's studentized range test and Pearson correlation analysis were performed to detect between-group differences in VAS scores (Experiment 1), to identify correlations between VAS scores and BAPA scores (Experiment 2), and to analyze the characteristic features of facial attractiveness and gender differences (Experiment 3); the significance level was set at P=0.05. Results Experiment 1 revealed some differences in VAS scores according to professional characteristics. In Experiment 2, BAPA scores were found to behave similarly to subjective ratings of facial beauty, but showed a relatively weak correlation coefficient with the VAS scores. Experiment 3 found that the decisive factors for facial attractiveness were different for men and women. Composite images of attractive Indian male and female faces were constructed. Conclusions Our photogrammetric study, statistical analysis, and average composite faces of an Indian population provide valuable information about subjective perceptions of facial beauty and attractive facial structures in the Indian population.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2004년도 The 3rd Annual Conference for The Korean Society for Bioinformatics Association of Asian Societies for Bioinformatics 2004 Symposium
• /
• pp.272-278
• /
• 2004

Recently, Pepe et al. (2003) employed the receiver operating characteristic (ROC) approach to rank candidate genes from a microarray experiment that can be used for the biomarker development with the ultimate purpose of the population screening of a cancer, In the cancer microarray experiment based on n patients the researcher often wants to compare the tumor tissue with the normal tissue within the same individual using a common reference RNA. This design is referred to as a reference design or an indirect design. Ideally, this experiment produces n pairs of microarray data, where each pair consists of two sets of microarray data resulting from reference versus normal tissue and reference versus tumor tissue hybridizations. However, for certain individuals either normal tissue or tumor tissue is not large enough for the experimenter to extract enough RNA for conducting the microarray experiment, hence there are missing values either in the normal or tumor tissue data. Practically, we have $n_1$ pairs of complete observations, $n_2$ 'normal only' and $n_3$ 'tumor only' data for the microarray experiment with n patients, where n=$n_1$+$n_2$+$n_3$. We refer to this data set as a mixed data set, as it contains a mix of fully observed and partially observed pair data. This mixed data set was actually observed in the microarray experiment based on human tissues, where human tissues were obtained during the surgical operations of cancer patients. Pepe et al. (2003) provide the rationale of using ROC approach based on two independent samples for ranking candidate gene instead of using t or Mann -Whitney statistics. We first modify ROC approach of ranking genes to a paired data set and further extend it to a mixed data set by taking a weighted average of two ROC values obtained by the paired data set and two independent data sets.

• 한국작물학회지
• /
• 제48권5호
• /
• pp.397-401
• /
• 2003

This experiment was conducted to know the characteristics of kernel growth as affected by various temperature regimes during grain filling using the varieties Hwaseongbyeo, Ilpumbyeo and Chucheongbyeo. The rice plants tested were grown in the natural condition at 1/5000a Wagner pots until flowering. After flowering, the rice plants were moved to controlled temperature conditions in a phytotron. The minimum/maximum daily temperature in the phytotron was controlled by 12/18, 15/21, 18/24, 21/27, and 24/$30^{\circ}C$, respectively. The grain weights were measured every three days after treatment. The mean daily kernel growth rate during active grain filling period showed different responses among varieties under various temperature regimes. The kernel growth rate of Chucheongbyeo was seriously reduced as temperature regimes were decreased. However, that of Ilpumbyeo was not influenced so critically. Ilpumbyeo showed some advantages in grain filling under low temperature regimes compared to Chucheongbyeo. The lag phase in grain filling of Chucheongbyeo was the longest among tested varieties, followed by Hwaseongbyeo under daily mean temperature regime of $15^{\circ}C$. Kernel weight of Ilpumbyeo increased fast in early grain filling phase under low temperature. This characteristic may be favorable for grain filling in temperate zone where the daily mean temperature is drastically dropped during grain filling period. Regression analysis with kernel growth rate and temperature showed the estimated critical low temperature for grain filling among varieties were $9^{\circ}C$, $12^{\circ}C$, $13^{\circ}C$ in Ilpumbyeo, Hwaseongbyeo and Chucheongbyeo, respectively. Under moderate temperature the duration of grain filling of Ilpumbyeo was longer than that of Chucheongbyeo. However, Under low temperature that of Ilpumbyeo was more favorable than Chucheongbyeo.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.42-45
• /
• 2008

Recently, aluminum is widely used to reduce the vehicle weight. Aluminum curved extruded products are used for the design of automotive frame parts. This study focuses on the determination of process condition fur automotive bumper beam with various curvatures. In this study, a curvature prediction model has been proposed considering the geometric relationship and the characteristic of the curvature extrusion equipment. Using the proposed model and FE analysis, the appropriated process condition was determined to produce the bumper beam. Finally, curvature extrusion experiment was carried out to verify the effectiveness of the proposed curvature prediction model and the process condition.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2188-2193
• /
• 2007

Since the use of CFCs and HCFCs refrigerants are to be restricted due to the depletion of ozone layer, this experiment applies the R134a gas to study the performance characteristic from the superheat control for improving the energy efficiency. The experiments are carried out for the condensing pressure of refrigeration system from 1.5 MPa to 1.6 MPa by 0.05 MPa and for superheat temperature from 0$^{\circ}C$ to 5$^{\circ}C$ by 1$^{\circ}C$ at each condensing pressure. As a result of experiment, when the superheat temperature is 1$^{\circ}C$ at each condensing pressure, the refrigeration system has the highest performance.

• Tribology and Lubricants
• /
• 제1권1호
• /
• pp.88-101
• /
• 1985

함유베어링의 성능특징과 다공율사이에는 어떤 관계가 있다. 그 관계를 뚜렷하게 하기 위하여 이 논문에서는 수치해석과 실험을 통하여 그 관계를 규명하였다. 수치해석과 실험결과는 잘 일치되며 다공율의 증가에 따라 姿勢角과 마찰인자가 증가하는데 다공율의 증가에 따라 負荷容量은 감소한다는 것을 보여 주고 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.205-207
• /
• 2001

This study is characteristic analysis to optimize triggering of a high-power trigatron by FEM which is used to analyse electric field distribution in the trigatron. Triggering characteristics of a trigatron depends on arrangement of voltage polarity applied on electrodes and configuration of electrodes. This study is the preliminary stage for an experiment and make it possible to experiment effectively by finding optimal triggering characteristics though 3-dimensional node-based FEM which can practically model the complex structured electrode system.