• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.997-1006
• /
• 2010

For manufacturing modern cars, so-called multi-materials, such as aluminum alloy with high-strength steels, are used. For obtaining such materials, a new joining method is required to achieve the multi-material design. Mechanical clinching is one of joining methods used to join the dissimilar materials. The objective of this study is to investigate the characteristics of mechanical clinching of Al5052 alloy to high-strength steels (SPFC440, 590, 780). Using FE-analysis and clinching experiment, the joinability of Al5052 alloy to high-strength steel is evaluated by geometrical shape of mechanical clinched joint, such as neck-thickness and undercut. Further, the joint strength is evaluated by performing a single-lap shear test. The upper high-strength steel SPFC780 was not clinched because of the necking of the upper sheet. The joint strength increased with increasing strength of the upper sheet. For the lower high-strength steel sheet, the joinability and joint strength decreased with increasing strength of the lower sheet.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.113-128
• /
• 1990

In recent years, various types of coastal protection scheme have been studied around the coastal region. Among them, so-called zonal protection systems are being watched with interest from various points of view. In this paper, wave overtopping rate from overflowing the vertical seawall is investigated by conducting two dimensional model on the horizontal bed experiment. Hereafter this system is referred to as a artificial reef system. One is the foundation to control wave height near the surfzone and the other is function to prevent coastal disaster by suppressing net overtopping rate. The main results obtained in this study are summarized as follows. 1) Wave attenuation taken place on the artificial reef can be predicted numerically by using energy dispersion model due to wave breaking proposed by Battjes. 2) To evaluate the wave overtopping rate from a vertical seadike on various coastal constructions by weir model, a numerical procedure for prediction of overtopping is confirmed.

• Journal of Plant Biotechnology
• /
• v.34 no.1
• /
• pp.11-17
• /
• 2007

Previously developed transgenic watermelon rootstocks (gongdae) inserted by CGMMV-CP were examined to test the virus tolerance levels. In the restricted plastic house, the $T_{3}$ watermelon rootstock showed tolerance to CGMMV until 70 days after inoculation on the leaves while the non-transformed watermelon rootstock became susceptible at 20 days after inoculation. In the field, tolerance efficiency of transgenic rootstocks maintained up to 40% at 71 days after contamination with CGMMV in the soil while all of the non-transformed rootstocks became susceptible at 37 days with the same condition. In the same field, transgenic rootstocks showed more tolerance to CGMMV than the non-transformed rootstocks as those were inoculated on the leaves, but it showed only 10 days delay before being susceptible. Therefore, transgenic rootstocks have a characteristic of delay effect against CGMMV susceptibility, rather than resistance character. From $T_{3}$ rootstocks homozygous for the CGMMV-CP horticulturally favorable individuals were selected for further breeding and a transgenic line was finally obtained at the $BC_{1}T_{5}$. A material transfer experiment was conducted to find out if the DNA, RNA or expressed protein in the transgenic rootstocks could move to the grafted scion (non-transformed watermelon, Super-Kumcheon). PCR, northern, and western blot analysis were performed and no evidence of transferring of those materials from rootstock to scion was ever found.

• The Plant Pathology Journal
• /
• v.34 no.5
• /
• pp.381-392
• /
• 2018

Clavibacter michiganensis subsp. michiganesis (Cmm) is a quarantine-worthy pest in $M{\acute{e}}xico$. The implementation and validation of new technologies is necessary to reduce the time for bacterial detection in laboratory conditions and Raman spectroscopy is an ambitious technology that has all of the features needed to characterize and identify bacteria. Under controlled conditions a contagion process was induced with Cmm, the disease epidemiology was monitored. Micro-Raman spectroscopy ($532nm\;{\lambda}$ laser) technique was evaluated its performance at assisting on Cmm detection through its characteristic Raman spectrum fingerprint. Our experiment was conducted with tomato plants in a completely randomized block experimental design (13 plants ${\times}$ 4 rows). The Cmm infection was confirmed by 16S rDNA and plants showed symptoms from 48 to 72 h after inoculation, the evolution of the incidence and severity on plant population varied over time and it kept an aggregated spatial pattern. The contagion process reached 79% just 24 days after the epidemic was induced. Micro-Raman spectroscopy proved its speed, efficiency and usefulness as a non-destructive method for the preliminary detection of Cmm. Carotenoid specific bands with wavelengths at 1146 and $1510cm^{-1}$ were the distinguishable markers. Chemometric analyses showed the best performance by the implementation of PCA-LDA supervised classification algorithms applied over Raman spectrum data with 100% of performance in metrics of classifiers (sensitivity, specificity, accuracy, negative and positive predictive value) that allowed us to differentiate Cmm from other endophytic bacteria (Bacillus and Pantoea). The unsupervised KMeans algorithm showed good performance (100, 96, 98, 91 y 100%, respectively).

• Korean Journal of Organic Agriculture
• /
• v.8 no.3
• /
• pp.131-146
• /
• 2000

This experiment was focused on finding out the potential problems in organic farming system, which is recently emphasized on the produce of horticultural crops due to the serious environmental deterioration. Thus, in this study, the effect of the application of organic farming materials in soil on plant growth and components of chinese cabbage and the soil Physicochemistry property were compared with conventional culture. The results were summarized as follows : 1. The effect of soil chemical properties after application of organic farming materials, The amounts of pH and O.,M. in N, P, K treated plot were few of change, To the contray, fermentation compost and microorganisms fermentation compost treated plot were some increase, Amount of P$_2$O$_{5}$ , Ca and increase in comparison with the N, P, K treated plot, Specially chicken manure+ microorganisms fermentation compost treated plot was the highest. 2. Change of soil microbial after application of organic farming materials, The number of bacteria and actinomycetes in N, P, K treated plot were appeared definite direction, to the fermentation compost and microorganisms fermentation compost treated plot showed the increased tendency, specially, chicken manure+ microorganisms fermentation compost treated plot was the highest, 3. The growth characteristic of chinese cabbage after application of organic farming materials was superior in order of chemical fertilizers plot> microorganisms fermentation compost plot> fermentation compost plot. It shows the NO$_3$$^{[-10]}$ accumulation in chinese cabbage was higher in the outer leaves than in the inner leavess. It was some lower in the microorganisms fermentation compost plot, it was the highest at chemical fertilizers plot , all inner and outer leaves.

• Food Science of Animal Resources
• /
• v.24 no.1
• /
• pp.37-43
• /
• 2004

The "Ginseng Pork" produced by feeding ginseng by-products can be a compatible product in the sense of increasing pork consumption and developing functional food in the international pork market. This experiment was conducted to produce "Ginseng Pork" with emphasis on growth performance and meat quality. Experiments were conducted in which 30 Landrace heads were fed with bark of ginseng root(BGR) or heating extracts ginseng leaves and stem(HEG). WB-shear force was not different among the treatment groups until 15 days of ageing, but pork fed with the 6% BGR showed a higher shear force at 20 day of storage at 4$^{\circ}C$. Cooking loss showed lower value for the 9% BGR group compared with the control group. At 15 day, the 3% and 9% BGR groups showed lower cooking losses than control. Pork groups fed HEG showed a significantly(p<0.05) lower TBARS values after 5 days of storage. As for VBN analysis, the feeding groups of 9% BGR and 5.5% HEG had significantly lower values at 5 and 20 days when compared to the other treatment groups. It might be concluded that the accumulation of ginseng saponin in the pork resulted in retarding the ageing and inhibiting the oxidation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.4
• /
• pp.65-73
• /
• 2003

This paper presents the implementation of an analog signal-processing ASIS to detect an angular velocity signal from a vibrator angular velocity detection sensor. The output of the sensor to be charge appeared as the variation of the capacitance value in the structure of the sensor was detected using charge amplifiers and a self oscillation circuit for driving the sensor was implemented with a sinusoidal self oscillation circuit using the resonance characteristics of the sensor. Specially an automatic gain control circuit was utilized to prevent the deterioration of self-oscillation characteristics due to the external elements such as the characteristic variation of the sensor process and the temperature variation. The angular velocity signal, amplitude-mod)Hated in the operation characteristics of the sensor, was demodulated using a synchronous detection circuit. A switching multiplication circuit was used in the synchronous detection circuit to prevent the magnitude variation of detected signal caused by the amplitude variation of the carrier signal. The ASIC was designed and implemented using 0.5${\mu}{\textrm}{m}$ CMOS process. The chip size was 1.2mm x 1mm. In the experiment under the supply voltage of 3V, the ASIC consumed the supply current of 3.6mA and noise spectrum density from dc to 50Hz was in the range of -95 dBrms/√Hz and -100 dBrms/√Hz when the ASIC, coupled with the sensor, was in normal operation.

• Development and Reproduction
• /
• v.16 no.2
• /
• pp.101-106
• /
• 2012

Importance of behavior factors or environmental factors in visual organization and visual function of fish is treated with great care in visual ecology, and there is no study about initial ocular growth and development on the dark banded rockfish, Sebastes inermis. Thus, this study was performed. The total length, head length, head depth, eye diameter and lens diameter of the dark banded rockfish showed positive allometric relationship between parturition stage and 60 days post-parturition (dpp). The increase in total length relative to head length and head depth, head length growth relative to eye diameter and lens diameter, and head depth growth relative to eye and lens diameter were nearly isometric. The eyes were formed completely at parturtion stage. At this age, the eye has an optic nerve fiber layer, a ganglion cell layer, an inner plexiform layer, an inner nuclear layer, an outer plexiform layer, an outer nuclear layer, an outer limiting membrane, a rod and cone layer and an epithelial layer. Thickness of retina at 60 dpp was higher than that of at parturition stage. During this experiment, the proportion of the rod and cone layer, outer nuclear layer, and optic nerve fiber layer of retina were significantly increased, while the proportion of the outer plexiform layer, inner nuclear layer and ganglion cell layer of retina were significantly decreased (P<0.05). The essential demands that must be met by the retina in this species pertain to light sensitivity and spatial resolution.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.276-276
• /
• 2017

This study was examined to establish a conditions for producing Tteokbokki using dry-milling rice flour which can save manpower and labor time. Since the cost of producing rice flour milled in a wet condition is 500 to 700 won/kg, which is more than twice as much as that of 300 won wheat flour, it is necessary to directly make rice flour from raw rice. The dry-milling rice flour used in the experiment was produced by Air mill (Nara machinary co. ltd., Tokyo, Japan) from 5 rice cultivars (Samkwang, Dasan-1, Boramchan, Seolgaeng, Hanareum-2), which were cultivated in A-san in 2015 year. Their particle sizes were 50, 100 and $150{\mu}m$ for each cultivar, respectively. A control was a wet-milled rice flour milled with a roll mill after the rice was soaked in water for 4 hours. The moisture content of dry-milling rice flour based on cultivars was 11 ~ 12%, and added water up to 50~55% of dry-milling rice flour weight. The RVA characteristic of peak viscosity was the highest in Dasan-1 and Hanareum-2, the lowest in Seolgaeng. The setback value used as an indicator of aging was the highest in Dasan-1, therefore Dasan-1 was expected to be quick solidification, resulting in the low tendency of sensory evaluation. The damaged starch was high in Dasan-1 and Boramchan (p<0.05) compared to others. The Hunter color L were no significant among cultivars and b value increased in all cultivars of dry-milling rice flour compared with control. The hardness of dry-milling rice flour was higher than that of the control, especially Dasan-1 and Hanareum-2 were the highest. Based on the sensory evaluation, the best cultivars were Boramchan, Hanareum-2 and Samkwang. The overall preference of dry-milling rice flour was good in particle size of 50~100um.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.227-227
• /
• 2017

This study was conducted to analyze the reduction of quality and ripening rate of rice due to submergence during ripening stage and identify the physiological cause. Korean japonica type rice cultivars, Nampyeong was used in the experiment. The following 7, 14 day after heading, they were then moved into submergence treatment facility and we conducted the tests under three different submergence conditions - T1(clear water and overhead submergence), T2(Muddy water and exposure of Flag leaf end ), T3(Muddy water and overhead submergence), and the treatment lasted for 4days. The decrease of ripening rate was most severe in T3 treatment at 7days after heading, and the decrease of head rice ratio was most severe in T3 treatment at 14days after heading. Meanwhile the starch synthesis was inhibited, as the supply of assimilation products was inhibited in grain during the submergence treatment. And in stem, sucrose content was increased because the soluble carbohydrates accumulated before heading were decomposed. These changes may be due to the consumption of respiratory substrate in anaerobic conditions and the inhibition of the production of photosynthetic products by light interception. In order to see what kind of reaction occurs at the molecular level, we examined the degree of RNA expression in grain, stem and leaf. First, the expression of rna associated with starch synthesis in grain was decreased in all submergence treatment. and especially Ospul(DBE) was more decreased in 14days after heading treatment than 7days after heading treatment. This difference can explain the result that the decrease of head rice ratio was more severe at 14days after heading. And in stem, the expression of rna associated with the supply of assimilation products was decreased in submergence treatment. Finally in leaf, the expression of rna(ADH, ALDH) associated with anaerobic respiration was increased, while the expression of rna associated with photosynthesis was decreased. These results of physiological analysis can used to develop the cultivation technique and to offer the information for breeding the cultivars with tolerant characteristics to submergence stress during ripening stage in rice.