• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.367-367
• /
• 2019

최근 기후변화로 인해 국지성 호우 및 태풍의 빈도가 빈발하고 및 규모가 커지고 있으며 그로 인한 홍수피해규모는 증가하고 있다. 본 논문에서는 도시 지역의 호우로 인한 침수유발 강우량을 산정하는 기법의 정확도를 산정하는데 목적이 있으며 이를 위해 ROC(Receiver Operation Characteristic Curve) 분석을 이용하였다. 본 논문에서는 분포형 홍수해석 모형인 S-RAT 모형과 2차원 침수해석 모형 FLO-2D을 커플링하여 호우로 인한 침수해석을 실시하였으며 강우시나리오는 설계 강우 200mm의 강우를 10% 간격으로 증가시켜 강우량 대비 침수심 자료를 모의하였다. 모의한 침수심 자료를 이용하여 유역 격자를 $1km{\times}1km$ 별 강우량-침수심 관계곡선식을 제시하였으며 개발된 곡선식을 이용하여 특정 침수심(20cm)을 유발시키는 강우량(한계강우량)을 산정하였다. 정확도 산정은 ROC(Receiver Operation Characteristic Curve) 분석 방법을 이용하여 침수 유무의 적중률에 따른 민감도와 특이도를 이용하여 AUC(Area Under the Curve)의 점수로 정확도를 판단하였다. 본 논문에서는 본 논문에서 제시한 한계강우량의 정확도를 판단하기 위하여 2011년 7월의 사당역 일대 침수사례를 이용하였다. 실제 침수정보가 없어 실제 호우사상과 실제 하수관망을 고려할 수 있는 SWMM 모형을 이용하여 침수분석을 실시하였다. 분석 결과 평균 ROC는 약 0.7로 나타났으며 5 단계의 구분에서 Fair 단계로 적정 수준의 정확도를 확보한 것으로 나타났다.

• 대한예방의학회:학술대회논문집
• /
• 대한예방의학회 1994년도 교수 연수회(역학)
• /
• pp.150-153
• /
• 1994

Receiver operating characteristic (ROC) curves have been frequently used to compare probability models applied to medical problems. Though the curves are a measure of the discriminatory power of a model. they do not reflect the model's accuracy. A supplementary accuracy curve is derived which will be coincident with the ROC curve if the model is reliable. will be above the ROC curve if the model's probabilities are too high or below if they are too low. A clinical example of this new graphical presentation is given.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 추계학술대회
• /
• pp.505-515
• /
• 2008

This paper introduces six single and sequential acceptance sampling plans based on OC( Operating Characteristic) curve. Revised KS standards for acceptance sampling by attribute and by variable such as KSA 3102 : 1996, 3103 : 2005, KSA ISO 14560 : 2006, 8422 : 2001, 8423 : 2001 are presented.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1997년도 특별강연 및 춘계학술발표 개요집
• /
• pp.91-98
• /
• 1997

This research is to evaluate of the J-R curve characteristic in 5083 aluminum alloy weldment by utilizing the load ratio analysis. This analysis method can be evaluated the J-R curve only with load-displacement curve without any particular precision instrument equipment in CT specimen. For validity, the results of the load ratio analysis are compared with the those of the J-R curve, which are obtained by the ASTM standard unloading compliance method. The calculated crack length of the load ratio analysis is well appropriate that the measured final crack length. And the J-R curve slope estimated by the load ratio analysis is slightly smaller than that by the ASTM unloading compliance method.

• Communications for Statistical Applications and Methods
• /
• 제29권5호
• /
• pp.533-545
• /
• 2022

Collection of data on several variables, especially in the field of medicine, results in the problem of measurement errors. The presence of such measurement errors may influence the outcomes or estimates of the parameter in the model. In classification scenario, the presence of measurement errors will affect the intrinsic cum summary measures of Receiver Operating Characteristic (ROC) curve. In the context of ROC curve, only a few researchers have attempted to study the problem of measurement errors in estimating the area under their respective ROC curves in the framework of univariate setup. In this paper, we work on the estimation of area under the multivariate ROC curve in the presence of measurement errors. The proposed work is supported with a real dataset and simulation studies. Results show that the proposed bias-corrected estimator helps in correcting the AUC with minimum bias and minimum mean square error.

• 대한한방부인과학회지
• /
• 제26권3호
• /
• pp.85-92
• /
• 2013

Objectives: The purpose of this study is to find diagnostic points and define the cut off values of hot flashes by using digital infrared thermographic imaging. Methods: Thermographic images of 75 patients with hot flashes (HF, n=35) and non-hot flashes (NHF, n=40) were retrospectively reviewed. We used the temperature difference between Ex-HN3 and CV17, LU4, CV12, CV4 for diagnosing hot flashes. The temperature differences of between two groups were analysed using independent samples t-tests. The cut off values were calculated by received operating characteristic curve analysis. Analyses were undertaken using SPSS version 17.0. and p-value of <0.05 was considered significant. Results: The temperature difference Ex-HN3 and LU4 were the most significantly different between groups (p<0.001). Using receiver operating characteristic curve analysis, the sensitivity, specificity, and area under the curve were 65.7%, 72.5%, 0.729, respectively. The optimum cut off value was defined as $1.00^{\circ}C$. Conclusions: These results suggest that the digital infrared thermographic imaging is a reliable instrument for estimating hot flashes.

• 대한전자공학회논문지
• /
• 제12권6호
• /
• pp.5-8
• /
• 1975

Hall효과의 이용으로, 자계의 세기 또는 자속을 계측할 수 있는 자속계의 제조 및 특성조사를 시도하였다. Hall계수가 큰 InSb의 단결품을 Bridgemann법에 의하여 제작하고, 자장내에서 자계의 세기와 기전력 또는 전류를 계측한 결과, 만족할만한 감도와 직선적인 특성곡선을 얻었으며, 유사한 연구결과와 비교할때, 좋은 결과임을 알게 되었다. An Insb magnetic fluxmeter was made of InSb Single Crystal that was grown by Bridgemannmethods and then purified by vapor cone refining method. We investigated some properties of the InSb magneto fluxmeter. It was found that the resistivity and the Hall Coefficient of this single Crystal Were 4.4X10-2Ω and 4.5cm3/Coul, respectively, at room temperature. The Characteristic Curve of the InSb magnetic fluxmeter between the magnetic field the Hall voltage, with the Current flowing through the element a Parameter, had good lineanty i.e., We obtained a linear Calibration Curve of the flwmeter. The fluxmeter erved the purpose well enough up to 5 k-gaus.

• 한국농공학회논문집
• /
• 제46권6호
• /
• pp.61-69
• /
• 2004

The aim of the work described in this paper was to confirm the application of the equation of the soil-water characteristic curves on an unsaturated soil. A series of suction test for unsaturated soils was conducted on the selected 4 kinds of soil using modified pressure extractor apparatus. And it was carried out to analyse The experimental parameters which can be describe the soil-water characteristics, were determined by using the data obtained from the experiment. From the results, it was found that The matric suction varied according to the grain size distribution, amount of fine grain particles and void ratio. Also it was found that the residual degree of saturation was decreased with in crease of the void ratio, but the pore size distribution index and air entry value were increased with in crease of the void ratio. And The application of the soil-water characteristic curve equation was confirmed for the various conditions and the various state by the comparison between the measured degree of saturation and the predicted degree of saturation.

• Imaging Science in Dentistry
• /
• 제30권3호
• /
• pp.183-188
• /
• 2000

Purpose: This study was to evaluate the beam quality of intraoral X-ray equipments used at Yonsei University Dental Hospital (YUDH) using the half value layer (HVL) and the characteristic curve of intraoral standard X-ray film. Materials and Methods : The study was done using the intraoral X -ray equipments used at each clinical department at YUDH. Aluminum filter was used to determine the HVL. Intraoral standard film was used to get the characteristic curve of each intraoral X-ray equipment. Results: Most of the HVLs of intraoral X-ray equipments were higher than the least recommended thickness, but the REX 601 model used at the operative dentistry department and the X-707 model used at the pediatric dentistry department had HVLs lower than the recommended thickness. The slopes of the characteristic curves of films taken using the PANP AS 601 model and REX 601 model at operative dentistry department, the X-70S model of prosthodontic dentistry department, and the REX 601 model at the student clinic were relatively low. Conclusion: HVL and the characteristic curve of X-ray film can be used to evaluate the beam quality of intraoral X-ray equipment. In order to get the best X-ray films with the least radiation exposure to patients and best diagnostic information in clinical dentistry, X -ray equipment should be managed in the planned and organized fashion.

• 한국지반공학회논문집
• /
• 제33권4호
• /
• pp.25-34
• /
• 2017

불포화상태 지반의 흡수력과 응력변화를 반영한 토사사면의 전체 안정성 평가에서 매우 중요한 상태평가 입력변수로 함수특성곡선이 활용되고 있다. 함수특성의 경로의존성은 일반적으로 건조와 습윤과정으로 이력현상을 내포하는데 현장계측결과는 주로 실내실험의 습윤과정에 가깝게 나타난다. 본 연구에서는 이를 비정상류 해석에 적용하여 해석과 현장 계측된 결과들을 비교 검토하였다. 또한 심도가 증가할수록 강우의 영향이 작고 습윤과정을 적용해 산정된 값에 근접하였다. 따라서 불포화 토사사면 해석 시에 경로의존 함수특성곡선을 적용하여 안정성을 판단하는 것이 보다 합리적인 결과로 판단된다.