• Journal of Biosystems Engineering
• /
• 제32권6호
• /
• pp.448-454
• /
• 2007

This study was conducted to develop a 100 kPa soil tensiometer mainly consisted of a porous ceramic cup, water-holding tube, and a digital vacuum gauge, through theoretical design analysis and experimental performance evaluation. Major findings were as follows. 1. Theoretical analysis showed that air entry value of a porous media decreased as the maximum effective size of the pore increased, and the maximum diameter of the pores was $2.9\;{\mu}m$ for measuring up a 100 kPa of soil-water tension. 2. Property analysis of tensiometer porous cups supplied in Korean domestic market indicated that main components were $SiO_2$ and $Al_2O_3$ with a porosity range of $33.8{\sim}49.3%$. 3. The porous cup selected through sample fabrication and air-permeability tests showed weight ratios of 87% and 11% for $Al_2O_3$ and $SiO_2$. The analysis of SEM (scanning electron microscope) images showed that the sample was sintered at temperatures of about $1150^{\circ}C$, which consisted of pores with sizes of up to 25% of those for commercial porous cups. 4. The prototype soil tensiometer was fabricated using the developed porous cup and a digital vacuum gauge that could measure water tension with a pressure of 85 kPa in air tests. 5. In-soil tests of the prototype conducted during a period of 25-day drying showed that soil-water tension values measured with the prototype and commercial units were not significantly different, and soil-water characteristic curves could be established for different soils, confirming accuracy and stability of the prototype.

• 분석과학
• /
• 제30권6호
• /
• pp.379-389
• /
• 2017

In this study, we set up an analytical method that can be used for rapid and accurate determination of representative isoquinoline alkaloids in medicinal plants using UPLC-ESI-Q-TOF MS (ultra pressure liquid chromatography-electrospray ionization-quadrupole-time-of-flight mass spectrometry). The compounds were eluted on a C18 column with 0.1 % formic acid and acetonitrile, and separated with good resolution within 13 min. Each of the separated components was characterized by precursor ions (generated by ESI-Q-TOF) and fragment ions (produced by collision-induced dissociation, CID), which were used as a reliable database. We also performed method validation: analytes showed excellent linearity ($R^2$, 0.9971-0.9996), LOD (5-25 ng/mL), LOQ (17-82 ng/mL), accuracy (91.6-97.4 %) as well as intra- and inter-day precisions (RSD, 1.8-3.2 %). In the analysis of Chelidonium majus L., magnoflorine, coptisine, sanguinarine, berberine and palmatine were detected by matching retention times and characteristic fragment ion patterns of reference standards. We also confirmed that, among the quantified components, coptisine was present in the highest quantity. Furthermore, alkaloid profiling was carried out by analyzing the fragment ion patterns corresponding to peaks of unknown components. In this manner, protopine, chelidonine, stylopine, dihydroberberine, canadine, and nitidine were tentatively identified. We also proposed the molecular structure of the fragment ions that appear in the mass spectrum. Therefore, we concluded that our suggested method for the determination of major isoquinoline alkaloids by UPLC-Q-TOF can be useful not only for quality control, but also for rapid and accurate investigation of phytochemical constituents of medicinal plants.

• 경영과학
• /
• 제32권2호
• /
• pp.91-109
• /
• 2015

The M&A of firms has been emerged as the effective means of fast diversification and growth in dynamic environment. However, the empirical research about M&A in Korea has not been implemented rich due to the difficulty of obtaining M&A data. In this research, we empirically investigate the relationships among M&A, environment and firms' performance focused on Korean manufacturing firms, understanding the current practice of M&A in Korea. We use the Manufacturing Productivity Panel Survey Data, which are collected by Korea Productivity Center in 2013. The sample size is 575 and the sample is divided into M&A group and non-M&A group. We conduct logit analysis with the independent variables of environment factors (munificence, dynamic, uncertainty), and firms' performance (sales growth, ROS, labor productivity and Inventory turnover), and dependent variable of M&A group or non M&A group. The results show that M&A is closely related to environment feature and firm performance: M&A firms are likely to be the higher munificence and dynamic and the lower sales growth and higher profitability than non-M&A group. In addition, we also examine the characteristics of firms by M&A types (competitors, customer/supplier and firms from unrelated industry). These results imply that if firms confront the pressure of uncertainty (dynamic) and the lower growth, they tend to choose M&A. Futhermore, to profoundly understand the behavior of firms about M&A, it is required to classify the M&A firms by merge types.

• 동의신경정신과학회지
• /
• 제19권2호
• /
• pp.265-278
• /
• 2008

Stress reaction can be shown widely in the systems of psychology, endocrinology, immunology and so on. Stress promotes catecholamine from the autonomic nerve system, and this activates the sympathetic nerve system. As the sympathetic nerve system is activated, high blood pressure, tachycardia, vertigo, anxiety, diaphoresis, myotonic reaction and others can happen. Autonomic imbalance is the syndrome that people suffer from various symptoms accompanying no organic lesions and no psychological disorders by losing the hormonies between the sympathetic and parasympathetic nerve system. We experienced a 55 year-old female who complained of sudden abdominal pain after being frightened at trouble with her husband. Her abdominal pain was very characteristic, "Something is like rising in my abdomen.", that occurred several times a day. We diagnosed 'Bun-Ton Disease' from her abdominal sign. Several oriental medicine books recorded aspects of Bun-Ton disease and treatments, we had given herbal medicine and treated acupuncture be based on those. Results from studies to date suggest the Bun-Ton Disease's main cause is fright or shock, and they stimulate releasing epinephrine or norepinephrine, that result in various symptoms. In this case report, we will present this patient's case and review the Bun-Ton Disease.

• 방사성폐기물학회지
• /
• 제1권1호
• /
• pp.73-79
• /
• 2003

가압경수형 원자력발전소 일차계통에서 발생되는 방사성 부식생성물(크러드)은 원자력발전소 작업종사자 피폭의 주요원인이다. 또한, 최근 원자력발전소의 장주기운전 추세에 따라 장기간 노심에 침적된 방사성 부식생성물은 hideout 현상으로 노심의 출력에 영향을 주는 축방향이상출력 (AOA) 현상의 원인이 되고 있다. 크러드의 주요 성분은 마그네타이트, 니켈 페라이트, 코발트 페라이트가 주를 이루며, 이러한 산화물 형태는 강자성의 자기적 성질을 가지고 있다. 따라서, 전자석과 영구자석의 적절한 배치를 통하여 자기장을 발생시켜 크러드를 제거하는 필터 개발을 위해 개념 설계를 하였다. 기존의 필터와 달리 유체의 흐름을 방해하지 않아 압력저하 현상이 발생하지 않고, 연속적으로 사용할 수 있는 장점이 있다. 크러드 제거 기술의 하나로써 활용될 수 있을 것으로 기대된다.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.65-72
• /
• 1998

The BTA drilling chip is better for deep hole drilling than other self-piloting with pad drilling chips because the large length to diameter ratio allows a unique cutting force dispersion and better supplies the high pressure fluid. Therefore the BTA is useful for many tasks, such as coolant hole drilling of large scale dies, as well as tube seat drilling, which is essential for the heat exchanger, and variable component drilling for automobiles. Deep hole drilling has several significant problems, such as hole deviation, hole over-size, circularity, straightness, and surface roughness. The reasons for these problems, which often result in quality short comings, are an alignment of the BTA drilling system and the unbalance of cutting force by work piece and tool shape. This paper analyzes the properties through an experiment which com¬pared single-edge BTA drills with multiple-edge BTA drills, as well as the shapes of the tools to cause an unbalance of cutting force, and its effect on the precision of the worked hole. Conclusions are as follows. 1) In SMSSC drilling, 60m/min of BTA with single and multi-edged tools proved the best cutting condition and the lowest wear character. 2) The roundness got a little worse as cutting speed was increased, but surface roughness was hot affected. 3) It was proved that the burnishing torque of both drills approached 26%. which is almost the same as the 24% insisted on by Griffiths, and the dispersion characteristic of the multi-edged BTA drill proved better than the single-edge BTA drill.

• Tribology and Lubricants
• /
• 제23권5호
• /
• pp.219-227
• /
• 2007

The dynamic performance of air foil bearings relies on a coupling between a thin air film and an elastic foil structure. A number of successful analytical techniques to predict dynamic performance have been developed. However, the evaluation of its dynamic characteristic is still not enough because of the mechanical complexity of the foil structure and strong nonlinear behavior of friction force. This work presents a nonlinear transient analysis method to predict dynamic performance of foil bearings. In this method, time dependent Reynolds equation is used to calculate pressure distribution and a finite element method is used to model the bump foil structure. The analysis is treated with a direct implicit integration technique that can handle nonlinear problems and the stick-slip algorithm is used to consider friction force. Using this method the response to the mass unbalance excitation is investigated for various design parameters and operating conditions. The results of analysis show that foil bearing is very effective on the restriction of vibration at the resonance frequency compared to the rigid surface bearings and the effectiveness depends on the operating conditions, static load and a amount of mass unbalance. In addition, there exist optimum values of friction coefficient, bump foil stiffness and number of circumferential slit with regards to minimizing dynamic response at the resonance frequency. These optimum values are system dependent.

• 한국측량학회지
• /
• 제27권5호
• /
• pp.565-574
• /
• 2009

본 연구에서는 GPS 관측 데이터로부터 가강수량을 복원하는 과정에 있어서 한국의 계절별 특성을 고려한 가중 평균 기온 모델(Tm)을 개발하고 4개소의 GPS 상시관측소에 대하여 이를 적용하였다. 가중 평균 기온은 지역의 수증기 압력과 기온 프로파일에 관계하기 때문에, GPS 대류권 습윤 지연으로부터 추정한 수증기 정보의 정확도는 가중 평균 기온 추정 정확도에 비례하게 된다. 다른 국가에서 제시한 모델들과 비교하여 한국의 계절별 가중 평균 기온 모델의 적용이 GPS 가강수량 추정 정확도를 개선시킬 수 있다는 결과를 제공하였다. 따라서 실제 습윤 지연량을 가강수량으로 환산하는 단계에서 계절적으로 적합한 가중 평균 기온 모델은 다른 모델들에 비하여 대류권에서의 GPS 신호 지연으로부터 가강수량 추정의 상대적 편의 제거 효과가 크기 때문에 고정확도 수증기량 추정에 유용하다고 판단된다.

• 한국재료학회지
• /
• 제25권11호
• /
• pp.616-621
• /
• 2015

Atmospheric pressure plasma is used in the biological and medical fields. Miniaturization and safety are important in the application of apply atmospheric plasma to bio devices. In this study, we made a small, pocket-sized inverter for the discharge of atmospheric plasma. We used pulse power to control the neutral gas temperature at which the, when plasma was discharged. We used direct current of 5 V of bias(voltage). The output voltage is about 1 to 2 kilo volts the frequency is about 80 kilo hertz. We analyzsed the characteristics of the atmospheric plasma using OES(Optical emission spectroscopy) and the Current-Voltage characteristic of pulse power. By calculating of the current voltage characteristics, we were able to determine that, when the duty ratio increased, the power that actually effects the plasma discharge also increased. To apply atmospheric plasma to human organisms, the temperature is the most important factor, we were able to control the temperature by modulating the pulse power duty ratio. This means we can use atmospheric plasma on the human body or in other areas of the medical field.

• Journal of Biosystems Engineering
• /
• 제27권6호
• /
• pp.501-512
• /
• 2002

Traction performance of off-road vehicles is estimated using slip-traction relationships Two zero condition accepted by ASAE have been used widely to obtain the slip-traction relationships of off-road vehicles. This study was carried out using the soil bin systems to investigate the characteristic of slip-traction curves obtained using two zero conditions defined by ASAE. which are driving and driven zero condition, and to present disadvantage of slip-traction relationship based on two zero conditions of ASAE. The results of this study are summarized as follows : 1. For the driving zero condition, the curve of slip-traction relationship shows some issues. The first question is that the slip is zero when the traction is zero. The second question is that the value of slip is smaller than that of corresponding real slip, as the rolling radius decreased f3r the setting zero condition with driving wheel. 2. For the driven zero condition. slip occurs when the traction is zero, which is more realistic results than driving zero condition. But when a zero condition is set, skid occurs and this result increased the rolling radius of tire and increased slip value f3r the specific traction value of whole slip range. This kind of trend was getting bigger as the soil is softer, or the tire inflation pressure is higher. 3. From the results of this study, it was found that slip-traction relationship obtained by two zero conditions of ASAE is not realistic in estimating the traction performance of off-road vehicles. And also slip-traction relationship obtained for the same experimental condition showed different result in accordance with chosen zero condition,