• 산업경영시스템학회지
• /
• 제18권34호
• /
• pp.185-191
• /
• 1995

In this research, a mathematical programming model is developed for the economic modeling of sampling plans based on two evaluation criteria : the outgoing quality and the average total inspection cost A fuzzy goal programming model and its solution procedure are proposed for the managers whose management objectives on the two evaluation criteria are not rigorous. To study the sensitivity of quality characteristic dependence on the resulting inspection plans, a numerical example is solved several times for a dependent model.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.332-337
• /
• 2005

In order to investigate performance changes, the acceleration, vibration, and braking performance tests were carried out on the electric multiple units (EMUs) with over 20 years operation. According to the testing results, in vibration and braking performance, the similar performance results were obtained as compared with newly manufactured EMUs. However, in terms of acceleration performance, below reference value (3.0 km/h/s) has been obtained. This is mainly due to performance deterioration including traction motor. The precision diagnosis evaluation of deteriorated EMUs will be provided through the overall evaluation of corrosion testing and structural performance of car body.

• 정보보호학회논문지
• /
• 제24권1호
• /
• pp.229-240
• /
• 2014

암호 알고리즘에 대한 부채널 검증 필요성 증가로 인하여 이를 수행할 수 있는 부채널 검증 시스템이 여러 국내외 연구소에서 개발되고 있으며, 보안 제품의 인증 평가 수단을 목적으로 한 상용 제품도 판매되고 있다. 하지만, 스마트 카드와 같은 특정 보안 디바이스가 아닌 경우, 다양한 구동 환경으로 인하여 보안 디바이스에 대한 부채널 검증 보드 구현에 어려움이 있다. 본 논문에서는 국내 부채널 분석 시스템 개발을 목표로 진행된 KLA-SCARF 프로젝트의 부채널 검증 보드들의 구현과 특징에 대하여 기술하고자 한다. 이는 다양한 보안 디바이스 환경에서 부채널 분석 장비를 개발하고자 하는 연구자에게 방향을 제시할 수 있으리라 본다.

• 한국환경복원기술학회지
• /
• 제7권5호
• /
• pp.1-11
• /
• 2004

The purposes of this study are to revise an site-based environmental education(EE) Program evaluation chart and to evaluate site-based EE programs using the chart. For revising the evaluation chart, several elements in the former chart were changed, infused, deleted, integrated, or split. The points of some elements in the former chart were also changed. The revised chart consist of 38 elements in 6 areas: purpose and goal, teaching and learning plan, teaching and learning process, educational effect and programs evaluation, Program characteristic, and program operation. Using the revised chart, the researchers evaluated 159 site-based EE programs, funded by the Korean Ministry of Environment in 2002. The result indicated that the mark of 'teaching and learning plan' area is higher than other areas, while the mark of 'educational effect and programs evaluation' is the lowest. On the basis of evaluation, the researchers offered some recommendations for the Korean site-based EE programs.

• 대한가정학회지
• /
• 제49권1호
• /
• pp.121-133
• /
• 2011

This research was designed to compare the subjective evaluation of texture image and preference between offline and online by structural characteristics of women' jacket fabrics for spring and summer. 78 participants evaluated the sensibility image and preference of various fabrics. The data were analysed by factor analysis, t-test, Pearson's productive correlation, regression, and multi dimensional scale. The results were as follows: Sensibility image factors of women' jacket fabrics were 'classic' 'sophisticated' 'natural' 'characteristic' and 'practical'. Between offline and online, sensibility images showed no differences. In sensibility images, 'classic'-'sophisticated', 'natural'-'practical', and 'practical'-'characteristic' images showed significant correlation. By analyzing the contribution of fabric structure on sensibility images, density affected on the 'classic' image offline and online. By the results of regression analysis, thickness, density and weave affected on the tactile preference. In sensibility images, 'classic', 'sophisticated' 'characteristic' images were the influencing factor. 'Sophisticated', 'natural', 'characteristic' and 'practical' images affected on the purchase preference.

• 한국자동차공학회논문집
• /
• 제21권4호
• /
• pp.153-158
• /
• 2013

The purpose of this study is to investigate the performance characteristics of the counterflow exhaust heat recovery device for the applied gasoline engines. The EHRS device is installed behind the catalyst. This study investigates the engine warm-up characteristic, the exhaust noise characteristic, the back-pressure characteristic. The engine warm-up characteristics is (load 0%, load 10%, load 20%) in (idle, 1000rpm, 1500rpm, 2000rpm, 2500rpm) conditions by measuring the time it warmed up, coolant temperature ($25^{\circ}C{\sim}80^{\circ}C$) until the performance evaluation is performed. The wide open throttle and the coast down the exhaust noise and the back-pressure characteristic experiment repeated twice. The test conditions is 950rpm~6,050rpm proceed experiment repeated 3-5 times. Load 0% idle conditions except the results improved engine warm-up characteristics. The exhaust noise obtain similar results the BASE+EHRS W/O_FRT_MUFF with BASE and back-pressure to obtain similar results BASE+EHRS W/O_FRT_ MUFF with BASE+EHRS.

• 한국정밀공학회지
• /
• 제28권9호
• /
• pp.1103-1109
• /
• 2011

This research quantitatively confirmed an acoustical anisotropy that exists in a pure titanium plate from the signal of ultrasonic flow detection and suggested a new way to evaluate the acoustical anisotropy by inputting acquired characteristic of ultrasound signal into the neutral network. Using the fact with the suggested method that the characteristic of ultrasound signal is shown differently depending on the pure titanium plate's rolling direction, the neural network was constructed by extracting the characteristic that can decide each direction of $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ with waveform analysis program. As a result of inputting the characteristic of ultrasound signal acquired from a random rolling direction into the neural network that was built like this, it showed a pattern recognition rate higher than 95% on directions of $0^{\circ}$, $45^{\circ}$, $90^{\circ}$.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권4호
• /
• pp.175-182
• /
• 2002

This paper proposes an analytic method for measuring the accurate fundamental frequency component of a fault current signal distorted with a DC-offset, a characteristic frequency component, and harmonics. The proposed algorithm is composed of four stages: sine filer, linear filter, Prony's method, and measurement. The sine filter and the linear filter eliminate harmonics and the fundamental frequency component, respectively. Then Prony's method is used to estimate the parameters of the DC-offset and the characteristic frequency component. Finally, the fundamental frequency component is measured by compensating the sine-filtered signal with the estimated parameters. The performance evaluation of the proposed method is presented for a-phase to around faults on a 345 kV 200 km overhead transmission line. The EMTP is used to generate fault current signals under different fault locations and fault inception angles. It is shown that the analytic method accurately measures the fundamental frequency component regardless of the characteristic frequency component as well as the DC-offset.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.288-297
• /
• 1994

The sewing machine is one of the oldest machine that has ever used, which is related with clothes' life. Modern sewing machines are divided into three groups by the sititch character, which are the lock stitch sewing machine group, the over lock sewing machine group and the specical sewing machine group. The lock stitch sewing machine have being used more than any others, which is also good model to study. This work is part of the improvement of an industrial lock stitch(ILS) sewing machine's design. The research objectives are the kinematic analysis and evaluations of stitch performance. The feed dog and the needle extreme's motion, which are important two part's motion in the sewing machine, are characterized by the stitch process and the needle trace. The needle trace is formulated as the stitch spacing, the stitch spacing's ratio(the static characteristic), and the stitch's phase difference(the dynamic characteristic). The tested ILS sewing machine is evaluated as a good static characteristic and a bad dynamic characteristic. Namely, a stitch spacing's ratio is 0.01~0.063(mm/mm) and a stitch's phase difference ratio is 0.06~0.13(mm/mm).

• 한국임상수의학회지
• /
• 제33권2호
• /
• pp.97-101
• /
• 2016

In the field of clinical medicine, diagnostic accuracy studies refer to the degree of agreement between the index test and the reference standard for the discriminatory ability to identify a target disorder of interest in a patient. The receiver operating characteristic (ROC) curve offers a graphical display the trade-off between sensitivity and specificity at each cutoff for a diagnostic test and is useful in assigning the best cutoff for clinical use. In this end, the ROC curve analysis is a useful tool for estimating and comparing the accuracy of competing diagnostic tests. This paper reviews briefly the measures of diagnostic accuracy such as sensitivity, specificity, and area under the ROC curve (AUC) that is a summary measure for diagnostic accuracy across the spectrum of test results. In addition, the methods of creating an ROC curve in single diagnostic test with five-category discrete scale for disease classification from healthy individuals, meaningful interpretation of the AUC, and the applications of ROC methodology in clinical medicine to determine the optimal cutoff values have been discussed using a hypothetical example as an illustration.