• Journal of Trauma and Injury
• /
• v.27 no.4
• /
• pp.139-144
• /
• 2014

Purpose: Detection and determination of tendon injury in the finger or hand is not easy. Therefore, we aimed to study and evaluate the accuracy and the effectiveness of ultrasonography for the diagnosis of finger tendon injury. Methods: In this study, we enrolled patients, regardless of age and sex, with lacerations on their fingers. Patients with invisible wounds were excluded. We evaluated the accuracy and the effectiveness of ultrasonography and compared the results obtained from ultrasonography and with those obtained by visual observation of the injuries. Results: The sensitivity, the specificity and the accuracy of ultrasonography were found to be 66.7%, 100% and 91.3%, respectively (p<0.001) while those of physical examination were 71.4%, 98.3% and 91.3%, respectively. Small differences were observed between the sensitivities and specificities of the two examinations; however, the accuracies were the same (p<0.001). The area under the receiver operating characteristic (ROC) curve, which was used for diagnosis of tendon rupture using ultrasonography, was found to be 0.985 (95% confidence interval CI: 0.929-0.999),while that of physical examination was 0.938 (95% CI: 0.861-0.980). Conclusion: Ultrasonography can be used an effective diagnostic tool for patients with finger tendon injury.

• Journal of the Society of Disaster Information
• /
• v.8 no.3
• /
• pp.213-222
• /
• 2012

The purpose of this study was to extract the spiritual characteristic factors of the security martial arts qualitatively which are emphasized in guard situation. To get the purpose of this study, 216 people who are students majored in security service, security service professionals, specialists of practical and theoretical security martial arts were selected as participants for this study. The results of this study were as follows. There were divided 4 sub-factors and 20 detailed factors. The spiritual characteristics of the security martial arts were named psychological spirit which was consisted of concentration, self-confidence, self-management, flow, and self-esteem, ethical spirit which was consisted of sacrifice, justice, royalty, peace, and sense of duty, martial arts' spirit which was consisted of courtesy, toughness, defense, balance of mind and body, and bravery, and practical spirit which was consisted of responsibility, cooperation, modesty, determination, and professionalism.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2195-2202
• /
• 2011

Recently, navigation system is used to inform users of vehicle location and driving direction, moving distance and so on. This navigation uses GPS sensor for current location determination. The GPS sensor will determinate current coordinates by using triangulation algorithm. This characteristic bring about that the GPS signal is not available in the shadow region such as tunnel and urban canyon. Moreover, Even though the signal is available, inherent positional error rate of the GPS often results in the dislocation of vehicle. To solve, these problems, a new positioning system is proposed in the paper. The System utilizes geomagnetic sensors of smartphone, speed information of CAN of vehicle though bluetooth and WiFi APs for GPS shadow area. The experimental test shadows that the proposed system using multiple data is able to determine the position of vehicle in GPS shadow areas.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.5
• /
• pp.516-524
• /
• 1997

The propagation properties of various pulse signal types(square pulse, Gaussian pulse, trapezoid pulse, RF pulse) on coupled microstrip lines are investigated. Numerical integration technique which has its accuracy and is easily simulated, is used to obtain the time domain response of pulse signals. Frequency-dependent characteristics of coupled microstrip line is obtained using Jansen's approximate equation. The propagation properties of pulse signal on coupled microstrip lines is analyzed regarding to its geometric structure (relative permittivity ${varepsilon}_r$ substrate height h, strip width w of the microstrip line) and pulse width ${\tau}$ of signal pulse. The simulation results show that space between two lines is very significant parameter in pulse distortion in comparison of any other parameters. The results of this paper are compatible to the trade-off determination of relative permittivity, substrate height, strip width and pulse width of signal pulse when a design of MIC and MMIC is necessary.

• Applied Biological Chemistry
• /
• v.19 no.4
• /
• pp.243-247
• /
• 1976

A potent intracellular-lipid-producing yeast, Rhodotrorular glutinis var. glutinis sw-17 was studied on the production of carotenoids after shaking the cultures for 8 days at $25^{\circ}C$. The pigments were extracted with solvents and chromatographed with columns for its isolation. The carotonoids were identified by their positions on the column, and by their light-absorption curves. Close agreement was obtained between the absorption maxima of the isolated pigments and published literature values. The characteristic wave length maxima and the extinction values used for quantitative determination. The caroteniod pigments produced by the yeast were composed of torularhodin(28.52%), torulene(38.16%), neurosporene(1.49%), ${\gamma}-carotene(9.88%)$, ${\beta}$-zeacarotene(2.0%), ${\beta}-carotene(19.95%)$ and ${\delta}-carotene(trace)$.

• Clinical and Experimental Pediatrics
• /
• v.55 no.1
• /
• pp.11-17
• /
• 2012

Purpose: Early identification of neonatal sepsis is a global issue because of limitations in diagnostic procedures. The objective of this study was to compare the diagnostic accuracy of neutrophil CD64 and C-reactive protein (CRP) as a single test for the early detection of neonatal sepsis. Methods: A prospective study enrolled newborns with documented sepsis (n=11), clinical sepsis (n=12) and control newborns (n=14). CRP, neutrophil CD64, complete blood counts and blood culture were taken at the time of the suspected sepsis for the documented or clinical group and at the time of venipuncture for laboratory tests in control newborns. Neutrophil CD64 was analyzed by flow cytometry. Results: CD64 was significantly elevated in the groups with documented or clinical sepsis, whereas CRP was not significantly increased compared with controls. For documented sepsis, CD64 and CRP had a sensitivity of 91% and 9%, a specificity of 83% and 83%, a positive predictive value of 83% and 33% and a negative predictive value of 91% and 50%, respectively, with a cutoff value of 3.0 mg/dL for CD64 and 1.0 mg/dL for CRP. The area under the receiver-operating characteristic curves for CD64 index and CRP were 0.955 and 0.527 ($P$ <0.01), respectively. Conclusion: These preliminary data show that diagnostic accuracy of CD64 is superior to CRP when measured at the time of suspected sepsis, which implies that CD64 is a more reliable marker for the early identification of neonatal sepsis as a single determination compared with CRP.

• Applied Biological Chemistry
• /
• v.29 no.3
• /
• pp.248-254
• /
• 1986

The product specificity of Bacillus ${\alpha}-amylase$ on raw rice starch has teen studied by using HPLC and scanning electron microscopy (SEM). Analysis of starch degradation products digested by ${\alpha}-amylase$ showed considerable differences between raw and gelatinized rice. The hydrolysis of raw rice starch resulted in formation of more glucose and maltose than those of gelatinized starch. SEM revealed characteristic enzyme degradation patterns. Hollow curvatures were observed in gelatinized starch, indicating the substrate is hydrolyzed in the interior of the starch chain by Bacillus ${\alpha}-amylase$. In contrast, raw starch were hydrolyzed from the end of the substrate, resulting in pinholes over the surface of the starch granules.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.3
• /
• pp.95-100
• /
• 2020

Machines and facilities are physically or chemically degenerated by continuous usage. One of the results of this degeneration is the process mean shift. The representative type of the degeneration is wear of tool or machine. According to the increasing wear level, non-conforming products cost and quality loss cost are increasing simultaneously. Therefore a periodic preventive resetting the process is necessary. The total cost consists of three items: adjustment cost (or replacement cost), non-conforming cost due to product out of upper or lower limit specification, and quality loss cost due to difference from the process target value and the product characteristic value among the conforming products. In this case, the problem of determining the adjustment period or wear limit that minimizes the total cost is called the 'process mean shift' problem. It is assumed that both specifications are set and the wear level can be observed directly. In this study, we propose a new model integrating the quality loss cost, process variance, and production volume, which has been conducted in different fields in previous studies. In particular, for the change in production volume according to the increasing in wear level, we propose a generalized production quantity function g(w). This function can be applied to most processes and we fitted the g(w) to the model. The objective equation of this model is the total cost per unit wear, and the determining variables are the wear limit and initial process setting position that minimize the objective equation.

• Journal of Environmental Science International
• /
• v.19 no.7
• /
• pp.861-869
• /
• 2010

The present study aims to evaluate the characteristics of atmospheric polycyclic aromatic hydrocarbons (PAHs) pollution in roadside and residential areas of two Korean metropolitan cities (Seoul and Incheon) and a background area (Seokmolee). This purpose was established by analyzing temporal and spacial concentration distribution of total and 7 individual PAHs, which were extracted from ambient particulate matters, and by utilizing a multivariate statistical method (principal component analysis, PCA) for the qualitative determination of potential PAH sources. Target PAHs included benzo(a)anthracene (BaA), benzo(a)pyrene (BaP), benzo(b)fluoranthene (BbF), benzo(k)fluoranthene (BkF), chrysene (Chr), dibenzo(a,h)anthracene (DahA), and indeno(1,2,3-cd)pyrene (IcdP). For all surveyed sites, the concentrations of total PAHs were higher in winter season than in other seasons. However, the concentrations of individual PAHs varied with surveyed sites. In both residential and roadside sites of Seoul and Incheon, BbF revealed the highest atmospheric levels. For all 7 target PAHs, the ambient concentrations were higher in Seoul and Incheon than in a background area (Seokmolee). In both residential and roadside areas, the concentrations of 4 target PAHs (BaA, BbF, BkF, DahA) were higher in Incheon than in Seoul. However, both the residential and roadside Chr concentrations were comparable in Seoul and Incheon. In addition, the residential IcdP concentrations were higher in Incheon than in Seoul, whereas the roadside concentrations were higher in Seoul. The roadside and residential BaP concentrations exhibited the reverse result to the IcdP concentrations. An PCA analysis suggested that atmospheric PAHs in both residential and roadside areas would be due to combined effects of several potential sources such as gasoline- and diesel-fueled vehicles, coal/oil combustion, and waste incineration.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.4
• /
• pp.35-43
• /
• 2013

Most of the nuclear power plants(NPPs) adopts pressure difference type flow meters such as venturi and orifice meters for the measurement of feedwater flow rates to calculate reactor thermal power. However, corrosion products in the feedwater deposits on the flow meter by fouling as operating time goes. These effects lead to severe errors in the flow indication and then determination of reactor thermal power. The averaging BDFT, which has developed by Yun et al., has a potentiality to minimize this problem thanks to its inherent measurement principle. Therefore, it is expected that the averaging BDFT can replace the venturi meter for the feedwater pipe of steam generator of NPPs. The present work compares the amplification factor, K, based on CFD calculation against the K obtained from experiments in order to confirm whether a commercial CFD code can be applicable to the evaluation of characteristic for the averaging BDFT. In addition to this, the simulations to take into account of fouling effect are also carried out by rough wall option. The results show that the averaging BDFT is a promising flow meter for the accurate measurement of flow rates in the fouling condition of the NPPs.