• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.147-149
• /
• 1999

This paper deals with the determination of generator/exciter model parameters for a Cheju Hanlim steam turbine unit. Using the recorded data from the generator characteristic tests, the model parameters have been derived and verified by comparing the simulation results and recorded data. In addition to it, the closed-loop performance of voltage control on no-load condition has been assessed in the frequency domain by taking advantage of derived generator/exciter model parameters.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.6
• /
• pp.565-569
• /
• 2001

The spectral correction matrix has been established to study the simultaneous complextions between metals and a ligand, and it eliminated the mutual influence among the complexes. The two sensitive reations between iron(Ⅱ) and 1-(6-bromo-2-benzothiazolylazo)-2-naphthol(BBTAN) and zinc (Ⅱ) and BBTAN have been investigated and applied to the simultaneous determination of Zn and Fe at pH 8.5 in the presence of triton x-100. This method gave the simples determination of the characteristic constants of the complexes. For the analysis of natural water, foods and other samoles, the recoveries of Fe and Zn were between 92 and 109% and between 91 and 104%, and their relative standard deviations were less than 5.5 and 11%, respectively.

• Proceedings of the KIEE Conference
• /
• 1983.07a
• /
• pp.159-161
• /
• 1983

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.256-259
• /
• 1999

A new PWM method for voltage source inverters is described. The switching instants determination of the proposed PWM scheme is simple. Therefore, hardware implementation with a microprocessor system is easy and high frequency operation of an inverter can be obtained. The maximum line-to-line output voltage of 3-phase inverter with the proposed scheme is larger than that of the SPWM inverter under a linear modulation region. Principle of the proposed PWM method is described and harmonic characteristic analysis is carried out.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1629-1638
• /
• 1990

Using a 1/10 scale model pump, which is designed and manufactured to simulate two phase performance of reactor coolant pump of Y.G.N

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2001.10a
• /
• pp.31-34
• /
• 2001

The customer unsatisfaction in the new products exists, though the most of enterprises using QFD. It is mainly caused by the failure of corrective determination of technical importance rating(TIR). To derive the technical importance rating, the impact of the fulfillment of design requirements on the satisfaction of customer requirements must first be quantified. This has been accomplished through the use of a 1-3-9 or a 1-5-9 scale and ignored the peak of the house of quality(HOQ). In this paper we suggested the methodology reflecting effectiveness among engineering characteristics and adjusting the relationship strength between customer attribute(CA) and engineering characteristic (EC), by using limit probability and PCMR(pairwise comparison and median rank). With using this method, the determination of TIR would be more suitable for the voice of customers objectively. Here negative correlation is ignored.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09c
• /
• pp.31-36
• /
• 2010

This paper introduces a practical determination method for soil parameters adopted in the new performance based design code for port and harbour facilities in Japan. In the new port-design code, the depth profile of the derived values is modeled as the profile of the estimated values so as to be either the mean value or the regression line, then the correction factors are multiplied to the estimated value according to the coefficient of variation (if COV > 0.1) and the number of the data entries (if n < 10). The new port-design code is applied to the unconfined compression test results for the Hiroshima Port clay in order to evaluate the undrained shear strengths. From the discussion, it is emphasized that not only the statistic treatment but also the engineering judgment are required in the procedure of the soil parameter determination for the reliability design.

• Journal of Korea Water Resources Association
• /
• v.36 no.4
• /
• pp.533-545
• /
• 2003

This study analyzed several storm events observed in the Seolma-chun basin to derive the characteristic velocity of GIUH (Geomophological Instantaneous Unit Hydrograph) as well as its variability. Especially, this study focused on the variation of characteristic velocity due to the change of rainfall characteristics. The IUH of the Seolma-chun basin was derived using the HEC-1, whose peak discharge and time were then compared with those of the GIUH to derive the characteristic velocities. The characteristics velocities were analyzed by comparing with the GcIUH (Geomorphoclimatic IUH) as well as the characteristics of rainfall. Results are summarized as follows. (1) The characteristic velocity of GIUH was estimated higher with higher variability than the GcIUH, but their trends were found similar (2) Total amount of effective rainfall (or, mean effective rainfall) well explains the characteristic velocity of GIUH. This could be assured by the regression analysis, whose coefficient of determination was estimated about 0.6. (3) The duration and the maximum intensity of rainfall were found not to affect significantly on the characteristic velocity of GIUH. The coefficients of determination were estimated less than 0.3 for all cases considered. (4) For the rainfall events used in this study, the characteristic velocities of GIUH were found to follow the Gaussian distribution with its mean and the standard deviation 0.402 m/s and 0.173 m/s, respectively. Most of the values are within the range of 0.4∼0.5 m/s, and its coefficient of variation was estimated to be 0.43, much less than that of the runoff itself (about 1.0).

• Computers and Concrete
• /
• v.16 no.3
• /
• pp.467-485
• /
• 2015

This paper presents a comprehensive work on determination of yield base shear coefficient and displacement ductility factor of three to eight story actual reinforced concrete buildings, instead of using generic frames. The building data is provided by a walkdown survey in different locations of the pilot areas. Very detailed three dimensional models of the selected buildings are generated by using the data provided in architectural and reinforcement projects. Capacity curves of the buildings are obtained from nonlinear static pushover analyses and each capacity curve is approximated with a bilinear curve. Characteristic points of capacity curve, the yield base shear capacity, the yield displacement and the ultimate displacement capacity, are determined. The calculated values of the yield base shear coefficients and the displacement ductility factors for directions into consideration are compared by those expected values given in different versions of Turkish Seismic Design Code. Although having sufficient lateral strength capacities, the deformation capacities of these typical mid-rise reinforced concrete buildings are found to be considerably low.

• Analytical Science and Technology
• /
• v.34 no.2
• /
• pp.78-86
• /
• 2021

The objective of this study was to investigate urinary cut-off concentrations of quetiapine and risperidone for distinction between normal and abnormal/non-takers who were being placed on probation. Liquid chromatography-tandem mass spectrometric (LC-MS/MS) method was employed for determination of antipsychotic drugs in urine from mentally disordered probationers. The optimal cut-off values of antipsychotic drugs were calculated using receiver operating characteristic (ROC) curve analysis. The sensitivity and specificity of the method for the detection of antipsychotic drugs in urine were subsequently evaluated. The area under the ROC curve (AUC) was 0.927 for norquetiapine and 0.791 for 9-hydroxyrisperidone, respectively. These antipsychotic drugs are classified readily in the ROC curve analysis. The cut-off values for distinguishing regular and irregular/non-takers were 39.1 ng/mL for norquetiapine and 67.9 ng/mL for 9-hydroxyrisperidone, respectively. The results of this study suggest the cut-off values of quetiapine and risperidone were highly useful to distinguish regular takers from irregular/non-takers.