• 분석과학
• /
• 제13권4호
• /
• pp.474-483
• /
• 2000

사용후핵연료에 함유되어 있는 핵분열생성물을 분석하기 위하여 여러 원소를 동시에 분석할 수 있고, 분석감도가 커서 시료의 방사능과 폐기물의 양을 감소시킬 수 있는 유도 결합 플라스마 원자방출분광기/차폐 시스템을 구성하였다. 방사성 물질이 직접 접촉되는 플라스마 들뜸원과 시료용액 도입부를 스테인리스 스틸 재질의 글로브박스 내부에 설치하였으며, 고주파 들뜸전원, 분광기, 검출기 그리고 전기, 전자 및 아르곤 가스 공급 제어장치는 외부에 설치하였다. 분석능과 방사선 안전의 관점에서 시스템의 특성을 검증하였으며, 사용후핵연료 용해용액과 원자력발전소의 일차냉각수를 대상으로 핵분열생성물과 방사성 부식생성물 분석에 대한 적용성을 평가한 결과 $0.01-0.1mgL^{-1}$ 농도범위에서 상대표준편차는 5% 이하였다.

• 방사선산업학회지
• /
• 제8권2호
• /
• pp.111-121
• /
• 2014

This study was aimed to select useful mutants of rapeseed (Brassica napus L.) and leaf mustard (Brassica juncea L.), the seeds of three lines S-14, S-27, and S-28 were treated with gamma-ray and EMS. The optimum ranges of gamma-ray dose and EMS concentration to enlarge the characteristic morphological variations were also separately investigated. The survival rates of S-28 only linearly decreased with increasing the gamma-ray dose. The overall growth parameters decreased of gamma-ray dose in all three lines of S-14, S-27, and S-28. The reduction dosage 50 of gamma-ray was identified as 1,200 Gy for S-14 leaf mustard, while those of S-27 and S-28 rapeseed lines were appeared as same 1,000 Gy. The emergence rates of S-14 and S-27 showed no significant differences by EMS treatment, while the growth of all three lines were significantly decreased. The reduction concentration 50 in S-14 could not be determined, demonstrating that this leaf mustard line is presumably insensitive to mutagenic EMS, while those in S-27 and S-28 were identified as 3.0 and 2.5%, respectively, showing that these rapeseed lines possess higher sensitivity to EMS than S-14. Various morphological characteristics of $M_1$ generation obtained from mutagen treatment were elaborately investigated for further maintenance of $M_2$ generation. In $M_2$ generation variants showing short stem, yellow color in seed coat, chlorophyll deficiencies in leaf or pod, abnormal flower color were selected as potentially useful mutants for breeding.

• 대한방사선기술학회지:방사선기술과학
• /
• 제46권3호
• /
• pp.219-229
• /
• 2023

In this study, basic characteristics such as reproducibility, linearity, and directionality of RPL glass dosimeters were evaluated to improve the reliability of dose evaluation through RPL glass dosimeters, and uncertainty elements such as sensitivity by glass element and magazine slot sensitivity were evaluated. Using a mathematical model to calibrate the measured values of the RPL glass dosimeter, the measurement uncertainty was calculated assuming an example. As a result of the characteristic evaluation, the RPL glass dosimeter showed excellent performance with a standard deviation of ±1% (1 SD) for the reproducibility of the reading process, a coefficient of determination for linearity of 0.99997. And the read-out of the RPL glass dosimeter are affected by the circular rotation direction of the glass dosimeter during irradiation, fading according to the period after irradiation, the number of laser pulses of the reader, and response degradation due to repeated reading, it is judged that measurement uncertainty can be reduced by irradiation and reading in consideration of these factors. In addition, it was confirmed that the dose should be determined by calculating the correction factors for the sensitivity of each element and, the sensitivity of each reading magazine slot. It is believed that the reliability of dosimetry using glass dosimeters can be improved by using a mathematical model for correction of glass dosimeter readings and calculating measurement uncertainty.

• Geomechanics and Engineering
• /
• 제29권4호
• /
• pp.377-390
• /
• 2022

The stability of the roof rock-coal pillar-floor rock composite structure is of great significance to coal mine safety production. The cracks existing in the composite structure seriously affect the stability of the roof rock-coal pillar-floor rock composite structure. The numerical simulation tests of rock-coal-rock composite structures with different crack characteristics were carried out to reveal the composite structures' mechanical properties and failure mechanisms. The test results show that the rock-coal-rock composite structure's peak stress and elastic modulus are directly proportional to the crack angle and inversely proportional to the crack length. The smaller the crack angle, the more branch cracks produced near the main control crack in the rock-coal-rock composite structure, and the larger the angle between the main control crack and the crack. The smaller the crack length, the larger the width of the crack zone. The impact energy index of the rock-coal-rock composite structure decreases first and then increases with the increase of crack length and increases with the increase of crack angle. The functional relationships between the different crack characteristics, peak stress, and impact energy index are determined based on the sensitivity analysis. The determination of the functional relationship can fully grasp the influence of the crack angle and the crack length on the peak stress and impact energy index of the coal-rock composite structure. The research results can provide a theoretical basis and guidance for preventing the instability and failure of the coal pillar-roof composite structure.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.133-140
• /
• 2013

The purpose of this study is identifying the relationship among the business strategy, order receiving capability and leverage variables of a construction company using industry characteristic variables, in addition to the explanation variables used in the previous studies. The samples of this study were limited to the construction companies listed in Korean stock market. This study built multiple regression analysis models, which have been frequently used in traditional previous studies, in the explanation of company capital structure. Empirical analysis on Static Trade-off Theory and Pecking Order Theory was done by the built model. The study results suggested that the capital structure determination behavior of a construction company generally follows Static Trade-off Theory; however, profitability was found to follow Pecking Order Theory. The explanation variables used in the previous capital structure studies mostly produced significant results; however, the variables, which this study experimentally used, did not produce significant results. It is believed that it implies that additional studies are required in the selection of variables and study methodology. Consequently, a case that unconditionally supports a particular theory is scarce. It has been also found that a case can support both theories at the same time. Therefore, it is believed that development study methodology or introduction of new study methodology that can identify the dynamic characteristic of construction company capital structure formation is required.

• 대한환경공학회지
• /
• 제38권2호
• /
• pp.63-70
• /
• 2016

수돗물 공급과정에서의 소독부산물 발생현황과 이와 관련된 수질 인자와의 상관성을 조사하여 소독부산물 발생특성을 규명하고자 K-water에서 관리하는 정수장의 수돗물 공급과정 5개 계통에 대하여 조사를 실시하였다. 수돗물 공급과정에서의 공급계통별 Water age 및 노후관 공급계통을 구분하여 조사대상을 선정하였으며, 소독부산물인 트리할로메탄 (THMs) 및 할로아세틱에시드 (HAAs), 유기물 항목으로서 BDOC 및 DOC를 포함하여 7개 항목에 대해 월 1회 조사하였다. 조사결과 노후관계통 및 Water age가 길수록 공급과정 내 유기물 농도가 높아지는 경향성을 확인할 수 있었다. 소독부산물과 관련 영향인자들의 상관관계를 분석한 결과 계통별 잔류염소 감소와 Water age간 상관관계가 매우 높은 것으로 나타났다. 또한 Water age와 THMs 생성간의 결정계수값이 매우 높아 THMs 생성에 Water age가 중요한 인자임을 알 수 있었다. 잔류염소 감소율이 THMs 증가에 미치는 영향 또한 매우 높게 나타났으며, Water age가 길어질수록 수온과 THMs 생성에 미치는 영향은 증가하는 것으로 나타났다. 이와 반면 HAAs는 THMs와는 달리 Water age, 잔류염소, 수온과의 상관관계 조사결과 결정계수 값이 낮게 나타났다.

• 한국식품과학회지
• /
• 제22권1호
• /
• pp.26-32
• /
• 1990

김치발효 지표로서 미생물군집의 특성을 밝히고자 하였다. 군집크기는 Gram염색법에 의한 현미경직접계수에 의하여 측정하였다. 실온$(15^{\circ}C)$에서 김치발효는 Gram양성균군집, 효모군집 그리고 Gram음성균군집이 순서적으로 천이되었다. Gram양성균군집은 김치를 발효시키는 유산균으로 구성되어 있다. 효모군집의 발달은 김치의 악취를 내는 원인이 되며, Gram음성균군집은 악취와 더불어 김치의 연화작용에 관계된다는 사실이 특정적이었다. 그리고, 외관상의 Gram음성균군은 Gram양성균군집 내의 개체군의 노화와 사멸을 평가하는데 이용될 수 있었다. 특히 저온$(5^{\circ}C)$ 김치발효에서는 효모군집과 Gram 음성균군집이 발달되지 않고 Gram양성균군집만이 발달됨을 알았다. 이 사실로부터 숙성된 김치는 Gram양성균군집에 의하여 만들어짐을 의미한다. 따라서 미생물군집의 발달과 크기는 김치발효의 지표로 이용될 수 있고, 또한 김치숙성도를 수십분 내에 예측하는데 중요한 방법이 될 수 있다.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권4호
• /
• pp.195-203
• /
• 2015

In this study, the carrier acceleration-ramp-step test was applied to GPS carrier phase measurements, and the results were compared and analyzed. In the carrier acceleration-ramp-step test, the acceleration, ramp, and measurements are estimated using 10 consecutive carrier phase measurements for satellites observed at the same time based on the least square method. As for the characteristic of this test, if failure occurs in the measurement, the value jumps significantly compared to the previous result; but it judges that failure has occurred in all the satellites although failure has occurred in one satellite. Therefore, in this study, a method that eliminates a satellite with failure was suggested, and thresholds of the carrier acceleration, ramp, and step were suggested. The evaluation of the failure detection performance of carrier phase measurement using the suggested thresholds showed that failure could be detected when the carrier phase measurement changed abruptly by more than about 0.1 cycles.

• 대한기계학회논문집A
• /
• 제21권9호
• /
• pp.1392-1399
• /
• 1997

In order to determine the Mode I stress intensity factor ($K_1$) experimentally by means of the alternating current potential drop(ACPD) technique, the change in potential drop due to load for a ferromagnetic material containing a two-dimensional surface crack was examined. The cause of the change in potential drop and the effect of the magnetic flux on the change in potential drop were clarified by using the measuring systems with and without removing the magnetic flux from the circumference of the specimen. To remove the magnetic flux, a new measuring system was made by utilizing the characteristic of coaxial transmission line. The change in potential drop in the case without magnetic flux in the air was caused by the change in electromagnetic properties near the crack tip due to magnetization. The relationship between the change in potential drop and the change in $K_I$ was linealized by demagnetization and was found to be independent of the crack length.

• 전자공학회논문지
• /
• 제50권4호
• /
• pp.73-80
• /
• 2013

본 논문에서는 전송선의 정확한 고주파 특성화를 위해 실험적 접근을 기반으로 한 회로모델을 제안한다. 측정 시 불가피하게 발생하는 공진현상으로 인하여 배선의 길이에 상응하는 공진주파수에서 특성 임피던스 및 전파상수를 정확히 결정하기 어렵다. 따라서 물리적 통찰 및 이론을 바탕으로 이러한 공진효과가 배제된 전송선 파라미터 결정 방법이 제시되었다. 또한 고속신호의 전파 특성화를 위해 실험적으로 결정된 파라미터를 사용한 고주파 회로모델이 제안되었다. 본 논문에서 제안한 주파수 종속 전송선 파라미터 모델은 측정을 통해 검증되었으며, 고속 신호의 전파 특성화에 유용하게 적용될 수 있다.