• Journal of Information Technology Services
• /
• v.17 no.4
• /
• pp.1-19
• /
• 2018

Effective internal communication is known to have a positive impact on business performance, but there is a lack of research on the effects of online channels for workplace communication. This study using regression analysis examines how task-technology fit, information richness, self-efficacy, perceived ease of use, and perceived usefulness related to online communication channels affect not only the satisfaction with the tools but also the effectiveness of them. Additionally, we verify how the organizational culture of online and offline communication shows the control effect. As a result, all five variables were positively correlated with internal communication channels satisfaction, and we found that the organizational culture of online and offline communication controls the relationship between online communication channels satisfaction and effectiveness.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.229-234
• /
• 2001

An adiabatic counter-current vertical two-phase flow of air and water in narrow rectangular channels with offset strip fm was investigated experimentally. Tests were systematically performed with downward liquid superficial velocities and upward gas velocities covering 0 to 0.06 m/s and 0 to 2.5 m/s ranges, respectively. Two-phase flow regimes were classified by examining the video images of flow patterns in transparent test sections of 760 mm long and 100 mm wide channel with gaps of 3.0 and 5.0 mm. The channel average void fraction was measured by the quick-closing valve method. Unlike the flow regimes in the channels without fin, where bubbly, slug, chum, and annular flow were identified, only bubbly and chum flow regimes were found for the channels with offset strip fin. However the existence of fin in the channels showed negligible effects on the void fraction. Instead counter-current flow limitations were found to happen at lower air superficial velocity once offset strip fin was introduced in narrow rectangular channels.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.6
• /
• pp.568-572
• /
• 2009

We present a ternary microfluidic multiplexer unit, capable to address three flow channels using a pair of control lines with two different threshold pressure valves. The previous binary multiplexer unit addresses only two flow channels using a pair of control line with identical threshold pressure valves, thus addressing $2^{n/2}$ flow channels using n control lines. The present ternary multiplexer addressing three flow channels using a pair of control lines, however, is capable to address $3^{n/2}$ flow channels using n control lines with two different threshold pressure valves. In the experimental study, we characterized the threshold pressure and the response time of the valves used in the ternary multiplexer. From the experimental observation, we also verified that the present ternary multiplexer unit could be operated by two equivalent valve operating conditions: the different static pressures and dynamic pressures at different duty ratio. And then, $3{\times}3$ well array stacking ternary multiplexers in serial is addressed in cross and plus patterns, thus demonstrating the individual flow channel addressing capability of the ternary multiplexer. Thus, the present ternary multiplexer reduces the number of control lines for addressing flow channels, achieving the high well control efficiency required for simple and compact microfluidic systems.

• Computers and Concrete
• /
• v.20 no.3
• /
• pp.263-273
• /
• 2017

An experimental investigation is carried out on the failure mechanism of foam concrete with cold formed steel double C-Channels embedment. The foam concrete is made of cement and fly ash with a compressive strength between 9 and 24 MPa with different densities. Forty-eight tests have been carried out in four groups of specimens with various embedment depths of the steel in the concrete. Four modes of failure are observed, which include the independent failure of the C-Channels with and without a concrete block inside the channel as well as the combined failure of the two channels, and the failure of the extrusion block. A theoretical model has been developed to understand the failure process. The peak compressive force applied onto the C-Channels that causes failure is calculated. It is concluded that the failure involves independent slippage between two C-Channels, and the steel and the foam concrete blocks inside the C-Channels. A method to calculate the peak force is also developed based on the test results. The calculations also show that the shear strength of the foam concrete is about 8% of the compressive strength with ${\alpha}$ coefficient of 0.4 between the steel and concrete.

• The Korean Journal of Physiology and Pharmacology
• /
• v.4 no.4
• /
• pp.301-309
• /
• 2000

The purpose of our investigation was to examine the effects of prostaglandin $F_{2{\alpha}}\;(PGF_{2{\alpha}})$ on membrane potentials, $Ca^{2+}-activated\;K^+\;(K_{Ca})$ channels, and delayed rectifier $K^+(K_V)$ channels using the patch-clamp technique in single rabbit middle cerebral arterial smooth muscle cells. $PGF_{2{\alpha}}$ significantly hyperpolarized membrane potentials and increased outward whole-cell K currents. $PGF_{2{\alpha}}$ increased open-state probability of $K_{Ca}$ channels without the change of the open and closed kinetics. $PGF_{2{\alpha}}$ increased the amplitudes of $K_V$ currents with a leftward shift of activation and inactivation curves and a decrease of activation time constant. Our results suggest that the activation of $K_{Ca}$ and $K_V$ channels, at least in part, may lead to attenuate or counteract vasoconstriction by $PGF_{2{\alpha}}$ in middle cerebral artery.

• Journal of Adhesion and Interface
• /
• v.7 no.3
• /
• pp.10-15
• /
• 2006

After anchoring 3-(2-aminoethylamino)propyltriethoxysilane (APTES) onto the surfaces of the channels within ordered mesoporous silica, SBA-15, we dispersed $Cu^{2+}$-perfluorophthalocyanine into the modified SBA-15 channels. From small-angle X-ray scattering (SAXS) patterns and transmission electron microscopy (TEM) images, we confirmed that both the calcined and $Cu^{2+}$-perfluorophthalocyanine-incorporated SBA-15 samples possessed ordered periodic structures and hexagonal symmetry lattices (p6mm). The value of the $d_{100}$ spacing was decreased after the incorporation of $Cu^{2+}$-perfluorophthalocyanine into the modified SBA-15 channels. We used FTIR and UV-Vis spectroscopy and thermogravimetric analysis (TGA) to characterize both the modified SBA-15 and the $Cu^{2+}$-perfluorophthalocyanine-incorporated SBA-15 samples. From scanning electron microscopy (SEM) images and $N_2$ sorption measurements, we found that the $Cu^{2+}$-perfluorophthalocyanine units were incorporated within the modified SBA-15 channels, rather than on the external surfaces of the modified SBA-15 channels.

• Korean Journal of Organic Agriculture
• /
• v.22 no.1
• /
• pp.25-46
• /
• 2014

Since organized living cooperative associations sold their environment-friendly agricultural products directly to independent consumers in the past, the general distribution channels such as wholesalers had difficulty in handling these products. However, the ratio of distribution via wholesale channel has been gradually increased as consumption of environment-friendly agricultural products has expanded. This study is to address vitalization of wholesale distribution for environment-friendly agricultural products by gathering previous statistical data and analysis. In addition, statistical analysis are conducted by utilizing surveys on forwarders, consumers for environment-friendly agricultural products. As a result, the products producers ship are distributed through dealers at producers sites, producers cooperatives, or food process companies, food companies, internet shopping malls, large-scale distribution companies, consumer groups such as living cooperative associations, direct outlets at consumers sites, or exports. Among the channels, the large-scale distribution companies and franchised special shops account for 47%, the general supermarkets 15.7%, and living cooperative associations 14.6% respectively. By utilizing the research results on producers and consumers, and the distribution weight by channels for environment-friendly agricultural products, the distribution channels for living cooperative associations, wholesale markets, and large scale distribution companies are compared and evaluated. As a result, the level of producers' and consumers' satisfaction for them is the lowest since the low selling price for producers and high distribution margins.

• Animal cells and systems
• /
• v.16 no.5
• /
• pp.376-384
• /
• 2012

Although ginsenosides have a variety of physiologic or pharmacologic functions in various regions, there are only a few reports on the effects of transient receptor potential melastatin 7 (TRPM7) channels. Here, we showed evidence suggesting that TRPM7 channels play an important role in ginseng total saponin (GTS)-mediated cellular injury. The combination techniques of electrophysiology, pharmacological analysis, small interfering RNA (siRNA) method and cell death assays were used. GTS depolarized the resting membrane potentials and decreased the amplitude of pacemaker potentials in cultured interstitial cells of Cajal (ICCs) in gastrointestinal (GI) tract. The TRPM7-like currents in single ICCs and the overexpressing TRPM7 in HEK293 cells were inhibited by GTS. However, GTS had no effect on $Ca^{2+}$-activated $Cl^-$ conductance. GTS inhibited the survival of human gastric (AGS) and brea (MCF-7) adenocarcinoma cells. Also, GTS inhibited the TRPM7-like currents in AGS and MCF-7 cells. The GTS-mediated cytotoxicity was inhibited by TRPM7-specific siRNA. In addition, we showed that overexpression of TRPM7 channels in HEK293 cells was inhibited by GTS. Thus, TRPM7 channels are involved in GTS-mediated cell death in AGS and MCF-7 cells, and these channels may represent a novel target for physiological disorders where GTS plays an important role.

• Design & Manufacturing
• /
• v.1 no.1
• /
• pp.27-32
• /
• 2007

In the optical application demand for high quality lens is increasing. Plastics lenses are demanded more than glass lenses for large size lenses as well as micro-size lenses. It is difficult to apply typical straight cooling channels of injection mold to lens molding due to its non-uniform temperature distribution. In this study, we manufactured molds for plastic lenses with the conventional cooling channels and conformal cooling channels produced by the DMLS process. We evaluated cooling performance for the 2 molds by injection molding experiment. Also, uniformity of the temperature distribution was tested by infrared camera and temperature monitoring. We confirmed that the cooling performance and temperature uniformity with the conformal cooling channels is much improved from the ones with the conventional. The cooling time with the conformal cooling channels was reduced 30% compared with the conventional cooling channels.

• Journal of computational fluids engineering
• /
• v.17 no.3
• /
• pp.93-98
• /
• 2012

The injection molding process is suitable for manufacturing complicated plastic products. As the customer request higher quality products increase, realization of the precise dimensional and shape controls is getting more important. For this purpose it is important to obtain uniform cooling procedure over the whole surface of the high temperature molded plastic. Failure to this may lead to different shrinkage speed, internal stresses and unwanted shape deformations. It is necessary to distribute coolant flow rates to the main channel and to the sub-channels properly to insure uniform cooling process when there are parallel cooling channels. In this study, three-dimensional turbulent flow simulations for representative parallel cooling channels were performed. To insure the intended flow rate to each sub-channels, various shape designs for the channel system were investigated. The results show that as the Reynolds number increases the effect of shape design is more profound. Through the proper flow distribution, uniform cooling effects would be expected.