• 전자공학회논문지A
• /
• 제33A권10호
• /
• pp.107-114
• /
• 1996

Monte carlo method is especially a useful method for the analysis of thermal noise of semiconductor devices since the time dependence of microscopic details is simulated directly. Recently, a mthod for the calculation of the instantaneous currents of 2-dimensional devices, which is numerically more accurate than the conventional method, has been proposed using the generalized ramo-shockley theorem. Using this mehtod we investage the validity of the existing thermal noise theories of field-effect transistors. First, the 1-dimensional analysis of thermal noise theories of field-effect transistors. First, the 1-dimensional analysis of thermal noise theories of field-effect transistors. First, the 1-dimensional analysis of thermal noise using ramo-shockley theorem is shown to be applicable to 2 dimensional devices if the frequency of interest is low enough. The correlation between electrons in different regions of th echannel is shown not to be negligible. And we also obtian the spatial map of the noise in the channel region. By doing so, we show that the steady state nyquist theorem is the correct theory rather than the theory by van der ziel et.al.

• 한국통신학회논문지
• /
• 제21권7호
• /
• pp.1787-1802
• /
• 1996

In this paper, the performance for FH/CPFSK system with limiter-discriminator detection and integrage-and-dump post-detection filtering under thermal noie, partial-band noise jamming and rayleigh fading have been analyzed. The method of hard-decision diversity of which the transmitter repeated L times on different hops for each data symbol in a way to mutigate the effects of the jamming has been applied, and the receiver has been combined the L chips. Also, error-correcting code have been applied for improving performance of system. The thermal noise and partial-band noise jamming, intersymbol interference for all eight of the possible adjacent bit data patterns, and FM noise click for evaluating systems have been considered. Also optimum parameters to improve performance of FH/CPFSK system have been obtained and validities have been proved through computer simulation.

• 조명전기설비학회논문지
• /
• 제15권5호
• /
• pp.34-40
• /
• 2001

본 논문에서는 화력발전소 보일러 운전원 근무실 소음제어를 위하여 협대역 능동소음 제어시스템을 제안하였다. 제안된 시스템은 기준입력으로 구형파를 사용하여 기본파는 물론 고조파까지 한꺼번에 제어할 수 있게 하였으며, adjoint LMS 알고리즘을 사용하여 기존의 filtered-X LMS 알고리즘을 사용한 경우보다 계산량을 줄였다. 컴퓨터 시뮬레이션 결과, 기존의 광대역 능동소음 제어시스템에 비해 훨씬 작은 자수의 적응 필터를 사용하였으나, 더 우수한 특성을 보였다.

• 한국정보통신학회논문지
• /
• 제24권5호
• /
• pp.678-681
• /
• 2020

In this paper, we analyzed the noise figure of cascode low noise amplifier (LNA) based on the measured data of 65nm CMOS devices. By using the channel thermal noise model of transistors, we expanded noise figure equation and divided the equation into three parts to see its contributions to noise figure. We also varied design parameters such as bias point, transistor gate width, and operating frequency. Our results show that different noise sources dominate at the different operating frequencies. One can easily find the noise transition frequency with device models in ahead of the practical design. Therefore, this research provides a low noise design approach for different operating frequencies.

• 전자공학회논문지
• /
• 제52권10호
• /
• pp.148-158
• /
• 2015

수중음향 채널환경에서 운영되는 검파시스템 성능분석은 실험의 제약으로 인해 모의 도구를 활용하여 시스템 성능을 결정한다. 본 논문은 수중음향 채널에 대한 탐지 효과도 분석을 위하여 수중환경 데이터베이스를 기반 수중음향 탐지 효과도 분석 모의 도구를 제안한다. 먼저, HYCOM 수중환경 데이터베이스 기반으로 수중 환경을 구축하고, 음선이론을 이용하여 수중음향 전달 경로/음압 계산을 통한 다중경로 지연 특성을 고려하였다. 또한, 실 환경에서 발생하는 수중 잡음 특성을 반영하기 위해 운용 주파수에 따른 수중청음기/수중음향 채널 잡음 특성인 열잡음/수중 주변 잡음을 적용하였다.

• The Journal of the Acoustical Society of Korea
• /
• 제17권3E호
• /
• pp.58-66
• /
• 1998

In this paper, we analyze the effects of interference canceller on the performance of multitone DS/CDMA system proposed by Vandendorpe[5]. There are various kinds of interference canceller suggested by different researchers including parallel and successive cancellers and we adopt a canceller used by Yoon et al.[9] which is a kind of parallel canceller. We consider three kinds of interferences, that is, multipath interference(MPI), interchannel interference(ICI) and multiple access interference(MAI). The ICI is the interference between multitones. The equations for variances. are derived for the inteferences and thermal noise used for signal to noise ratio calculation. We also consider RAKE reception over multipath channel which is modeled as lowpass equivalent linear filter and three stage interference canceller used for performance improvement. We show the performance results for number of canceller stage, diversity order and number of users and draw some conclusions that interference canceller is effective in multitone DS/CDMA system and the performance is further improved with the higher order of diversity and larger number of PN chips.

• 전자공학회논문지A
• /
• 제32A권9호
• /
• pp.1167-1176
• /
• 1995

This paper suggests a method for optimal power assignment of the satellite transponder input carriers in the Multi-level & Multi-bandwidth system. The interference and the noise effects analyzed for the optimal power assignment are intermodulation product caused by the nonlinear transponder characteristics, adjacent channel interference, co-channel interference, and thermal noise in the satellite link. The Fletcher- Powell algorithm is used to determine the optimal input carrier power. The performance criteria for optimal power assignment is classified into 4 categories according to the CNR of destination receiver earth station to meet the requirement for various satellite link environment. We have performed mathematical analysis of objective functions and their derivatives for use in the Fletcher-Powell algorithm, and presented various simulation results based on mathematical analysis. Since the satellite link, it is meaningful to model and analyze these effects in a unified manner and present the method for optimal power assignment of transponder input carriers.

• 전자공학회논문지A
• /
• 제30A권8호
• /
• pp.63-71
• /
• 1993

To verify validity of the steady-state Nyquist theorem and the steady-state Nyquist theorem with hot carrier effects in semiconductor devices, we calculate thermal noise in n-i-n structures using both the steady-state Nyquist theorem and the Monte-Carlo method, and compare the results from these two-methods. When the carrier temperature is not far from the lattice temperature, the results from both methods agree with each other very well, but in the hot carrier regime there are some discrepancies. Our results support the argument that for MOSFETs and MESFETs operating in the linear region, the channel thermal noise should be explained by the steady-state Nyquist theorem rather than by the existing theories.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권5호
• /
• pp.2357-2380
• /
• 2019

In this paper, we investigate the impact of hardware impairments (HWIs) on the performance of a downlink massive MIMO system. We consider a single-cell system with maximum ratio transmission (MRT) as precoding scheme, and with all the HWIs characteristics such as phase noise, distortion noise, and amplified thermal noise. Based on the system model, we derive closed-form expressions for a typical user data rate under two scenarios: when a common local oscillator (CLO) is used at the base station and when separated oscillators (SLOs) are used. We also derive closed-form expressions for the downlink transmit power required for some desired per-user data rate under each scenario. Compared to the conventional system with ideal transceiver hardware, our results show that impairments of hardware make a finite upper limit on the user's downlink channel capacity; and as the number of base station antennas grows large, it is only the hardware impairments at the users that mainly limit the capacity. Our results also show that SLOs configuration provides higher data rate than CLO at the price of higher power consumption. An approach to minimize the effect of the hardware impairments on the system performance is also proposed in the paper. In our approach, we show that by reducing the cell size, the effect of accumulated phase noise during channel estimation time is minimized and hence the user capacity is increased, and the downlink transmit power is decreased.

• 한국광학회지
• /
• 제12권4호
• /
• pp.263-269
• /
• 2001

두 검출기를 이용하여 매개하향변환과정에서 발생하는 광자쌍을 동시계수할 때 배경 및 잡광이 동시계수에 미치는 영향을 조사하였다. 열광원에서 나온 광자들이 광자쌍과 함께 입사할 때 측정장치 내에서 분해시간에 의해 이러한 잡광을 효과적으로 제거하기 때문에 광자쌍의 동시계수에는 전형 영향을 미치지 않았다. 이러한 얽힘 상태의 광원의 동시계수 측정방법은 신호광의 손실이나 잡광의 영향을 최소화하는 정보처리와 전송 및 통신체계에 효과적으로 이용될 수 있다.