• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2218-2230
• /
• 2012

In this paper, we propose an efficient channel delay estimation method for orthogonal frequency-division multiplexing (OFDM) systems, especially over doubly-selective fading channels which are selective in both the symbol time domain and subcarrier frequency domain. For the doubly-selective fading channels in single frequency network (SFN), long and strong echoes exist and thus the conventional discrete Fourier Transform (DFT) based channel delay estimation system often fails to produce the exact channel delay profile. Based on the analysis of the discrete-time frequency response of the channel impulse response (CIR) coefficients in the DFT-based channel delay estimation system, we develop a method to effectively extract the true CIR from the aliased signals by employing a simple narrow-band low-pass filter (NB-LPF). The performance of the proposed system is verified using the COST207 TU6 SFN channel model.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.329-335
• /
• 2014

In this paper, to improve the performance of PB/MC-CDMA system, we have researched about the decision feedback channel estimation method using the pilot symbol with data symbol. The PB/MC-CDMA system is able to obtain the improved BER by frequency diversity gain and frequency domain equalizer in the frequency selective fading channel. However, when it is not the estimating of channel exactly, it is degrading the performance of BER in the system for occurred the interference among users. To improve the performane system in the multi-user environment the proposed system is using the decision feedback to estimate channel using the channel estimated value of the first stage and second stage. The proposed system is evaluated by computer simulation. The proposed system is not only able to improve the performance of BER by decreasing the interference to each user, but also the proposed system is possible to reduce number of pilot symbol to estimate the channel. Therefore, it confirmed the proposed system improves the performance than the conventional system.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.565-573
• /
• 2008

This paper proposes noise reduction methods to improve the channel estimation performance in Equalization On-Channel Repeater (E-OCR) for Terrestrial-Digital Multimedia Broadcasting (T-DMB) system. In the E-OCR for T-DMB system, the channel estimation is performed by the pilot signal extraction and the channel coefficient estimation. Since the performance of the channel estimation highly depends on the estimated channel coefficients whose accuracy is associated with the received signal-to-noise ratio (SNR), it is important to reduce noise existing at the estimated channel coefficients. To reduce such noise components, various noise reduction methods of the estimated channel coefficients based on the M -point weighted moving average are proposed. Computer simulations show that the proposed methods improve the estimation performance by more than 2 to 3 dB in terms of the symbol error rate after equalization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3154-3164
• /
• 1996

A major concern in a cellular mobile communication system is how to efficiently utilize the limited amount of frequencies. Various channel assignment methods and traffic sharing schemes have been proposed to improve system performance. However, these approaches suffer from complicated software and hardware requirements due to increased amount of traffic control In this paper, we propose a new method for improving system performance by controlling the powers of the set-up and voice channels of each cell site. We first show that the average number of blocked calls in a system is minimized when the traffic reates are made identical for all cell sites in a system. This result, together with the relationship between the channel powers and the service area, is used to determine the appropriate channel powers of each cell site. We also determine the upper limit on the channel power of each cell site considering co-channel interference and numerically show that the proposed method is effective in reducing the number of blocked calls without an excessive increase in the amount of system control.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.145-150
• /
• 2010

In this paper, we propose additional data transmission system for spectrum efficiency improvement and derive channel capacity formula as a approximated closed-form. Spread spectrum watermarking scheme is selected for the watermarking embedder. Nakagami-q (Hoyt) model is considered as a multipath fading channel. Numerical results show the channel capacity variation of the proposed system in wireless fading channel. From the results, we confirm that the channel capacity of the watermarking system is affected by the fading coefficient and system parameters such that host sampling frequency, host-to-watermark ratio, watermark-to-noise ratio, and PN sequence length.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.3
• /
• pp.214-220
• /
• 2005

In order to improve energy efficiency and solve power disturbances, power components measurement for both the supply and demand side of a power system must be implemented before appropriate action on the power problems can be taken. This paper presents a DSP (Digital Signal Processor)-based multi-channel (voltage 8-channel and current 10-channel) power measurement system that can simultaneously measure and analyze power components for both supply and demand. Voltage 8-channel and current 10-channel measurement is made through voltage and current sensors connected to the developed system, and power components such as reactive power, power factor and harmonics are calculated and measured by the DSP. The measured data are stored in a personal computer (PC) and a commercial program is then used for measurement data analysis and display. After voltage and current measurement accuracy revision using YOKOGAWA 2558, the developed system was tested using a programmable ac power source. The test results showed the accuracy of the developed system to be about 0.3 percent. Also, a simultaneous measurement field test of the developed system was implemented by application to the supply and demand side of the three-phase power system.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.284-286
• /
• 2009

In this paper, we consider a cognitive radio system operating as secondary user. It uses an empty channel that is not currently used by primary users having the license to the channel. In the previous works, secondary user looks for an empty channel by choosing any channel in order or randomly and by sensing the channel to distinguish whether primary users are using. But if primary user is fixed type, we will find an empty channel faster than the mentioned channel selecting methods by using a method considering prior information about cases that primary user used the channel, since it is possible to analogize the channel access possibility of primary user according to regular time and position. Therefore, we propose a channel searching method based on the channel list for the purpose of reducing the channel searching time and improving throughput of secondary users. Firstly, we determine a weighting value of each channel based on the history of channel activities of primary users. This value is added to current channel state buffer and we search an empty channel from channel with smallest value to one with the biggest value. Finally, we compare the performances of the proposed method with those of the sequential channel searching and the random channel searching methods in terms of the average channel searching time and the average number of transmissions of secondary user.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.207-212
• /
• 2001

The virtual reality technology has been developed as the computer and computer graphic technology are progressed. However it has still the limits of the use because of it costs a great for system construction. A virtual reality technology is the best application example to reduce time and cost of development in engineering. Actually, VR(Virtual reality) technology has given engineers the ability to design, test and evaluate engineering systems in a virtual environment. The objective of this paper is to construct the arm mounted display VR system by using 3 channel spherical screen and to show its capabilities of an engineering system development. This paper describes the development of arm mounted display VR system with 3 channel spherical screen system and the generation of 3 channel graphic modules. The arm mounted display VR system provides a highly economical efficiency because of it uses a popular computer system as a graphic server.

• Journal of Power System Engineering
• /
• v.18 no.3
• /
• pp.66-72
• /
• 2014

The local heat transfer and pressure drop of developed turbulent flows in the smooth convergent/divergent channels with rectangular and square cross-sectional areas along the axial distance have been investigated experimentally. The measurement was conducted within the range of Reynolds numbers from 15,000 to 89,000. The channel hydraulic diameter ratios of 0.67 and 1.49 in the rectangular channel with 2 inclined walls and the ratios 0.75 and 1.33 in the square channel with 4 inclined walls are considered. The comparison showed that among the four channels the square divergent channel has the highest thermal performance at the identical mass flow rate, at the identical pumping power, and at the static pressure drop.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.203-206
• /
• 2007

The Space-borne electro-optical camera system has panchromatic redundant image channel as well as primary channel in order to increase reliability of satellite system. In most case redundant channel never been used during the whole mission period. Staggered array configuration using redundant image channel and new operation mode proposed which operates primary and redundant channel simultaneously. Without new hardware design, fast electronics and system complexity, we can get 1.414 times more fine GSD image of original system or we can get 1.414 times more SNR or High dynamic range imaging mode. In this paper we deal with several image quality improvement methods using dual panchromatic channel.