• The Journal of the Korea Contents Association
• /
• v.10 no.9
• /
• pp.88-96
• /
• 2010

We propose the efficient channel coding method combined with a 2.4kbps speech coder. The code rate of a channel coder is given by 1/2 and 1/2 rate convolutional coder is obtained from the punctured convolutional coder with rate of 1/3. The punctured convolutional coder is used for a variable rate allocation. The puncturing method according to the importance of the output data of the source encoder is applied for the convolutional coder. The importance of output data is analyzed by evaluating the bit error sensitivity of speech parameter bits. The performance of proposed coder is analyzed and simulated in Rayleigh fading channel and AWGN channel. The experimental results with 2.4kbps EHSX coder show that the variable rate channel coding method is superior to non-variable channel coding method from the subjective speech quality.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.19-22
• /
• 1998

In this study, the efficient channel coding method combined with CS-ACELP is proposed. The same convolutional coder and Viterbi decoder of COMA mobile communication system is used as channel coder. To make the best available use of limited channel coding redundancy, unequal error protection of punctured convolutional coder is used for variable reate allocation. But, the overall code rate is given by 2. The performance of proposed coder is analyzed and simulated in a Rayleigh fading channel. Experimental results show that the objective and subjective speech quality of variable rate channel coding methods are superior to those of non-variable channel coding method.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.171-174
• /
• 2000

In this paper, We try to design combined source-channel coder that is compatible with video coding standards. This MAP decoder is proposed by adding semantic structure and semantic constraint of video coding standards to the method using redundnacy of the MAP decoders proposed previously. Then, We get the better performance than usual channel coder＇s.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.173-176
• /
• 2000

The fact that the channel coding methode with property of the source coder is better than using the channel characteristics is well known. In this paper We propose the UEP channel coding scheme using IP-SCCC and DCT-based embedded coder for image transmission. Moreover, to evaluate the effectiveness of the proposed scheme some simulation results are presented, in which the channel models of additive white Gaussian noise and Rayleigh fading are assumed.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.4
• /
• pp.45-51
• /
• 2000

This paper describes real-time implementation of a multi-channel G.729A speech coder using a 16 bit fixed-point Digital Signal Processor (DSP) and its application to a Voice Mailing Service (VMS) system. TMS320C549 by Texas Instruments was used as a fixed point DSP chip and a 4 channel G.729A coder was implemented on the chip. The implemented coder required 14.5 MIPS for the encoder and 3.6 MIPS for the decoder at each channel. In addition, memories required by the coder were 9.88K words and 1.69K words for code and data sections, respectively. As a result, the developed VMS system that accommodates two DSP chips was able to support totally 8 channels. Experimental results showed that the our multi-channel coder passes all of test vectors provided by ITU-T.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.4
• /
• pp.484-490
• /
• 1990

In speech coding scheme, because information bits have different error sensitivities over channel errors, the channel coder for combining with speech coding should be realized by the variable coding rate considering the bit importance of speech information bits. In realizing the 4 kbps channel coder for 12kbps speech, this paper have chosen the channel coding method by analyzing the hard-decision post-decoding error rate of RCPC(Rate Compatible Punctured Convolutional) codes and bit error sensitivity of 12 kbps speech. Under the coherent QPSK and Rayleigh fading channel, the performance analysis has showed that 10dB gain was obtained in speech SEGSNR by 4-level uneuqal error protection, which was compared with the caseof no channel coding at 7dB channel SNR.

• Journal of information and communication convergence engineering
• /
• v.5 no.2
• /
• pp.177-180
• /
• 2007

We compared CS-ACELP with QCELP speech coder in CDMA cellular under channel error environment and experimented performance with its measured value under channel error environment. Also, we specified the effective coding scheme to overcome. CS-ACELP speech coder using a LSP vector quantizer shows transparent speech quality from the results that SD is 0.92dB and outlier frames over 2dB is 2.9% in the BER 0.10% condition. CS-ACELP speech coder which is utilizing MA predictor shows better results on SVR and SEGSNR than QCELP speech coder(IS-96) adopting DPCM type predictor when bit error occurs from BER 0.01% to 0.50%.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.693-698
• /
• 2000

Aspects of classical information theory, such as rate distortion theory, investigate how to encode and decode information from an independently identically distributed source so that the asymptotic distortion rate between the source and its quantized representation is minimized. However, in most natural dynamics, the source state is highly corrupted by disturbances, and the measurement contains the noise. In recent coder-estimator sequence is developed for state estimation problem based on observations transmitted with finite communication capacity constraints. Unlike classical estimation problems where the observation is a continuous process corrupted by additive noises, the condition is that the observations must be coded and transmitted over a digital communication channel with finite capacity. However, coder-estimator sequence does not provide such a quantitative analysis as a variance for estimation error. In this paper, under the assumption that the estimation error is Gaussian distribution, a variance for coder-estimation sequence is proposed and its fitness is evaluated through simulations with a simple example.

• Journal of information and communication convergence engineering
• /
• v.2 no.3
• /
• pp.139-144
• /
• 2004

In order to transmit various types of multimedia data (i.e. voice, video, and data) over a wireless channel, the coding and modulation scheme needs to be flexible and capable of providing a variable quality of service, data rates, and latency. In this paper, we study a mobile multimedia COMA network combined with the concatenated Reed-Solomon/Rate Compatible Punctured Convolution code (RS/RCPC). Also, this paper propose the combination of concatenated RS/RCPC coder and COMA RAKE receiver for multimedia COMA traffic which can be sent over wireless channels. From the results, using a frequency selective Rayleigh fading channel model, it is shown that concatenated RS/RCPC coder at the wireless physical layer can be effective in providing reliable wireless multimedia CDMA network. And the proposed scheme that combine concatenated RS/RCPC coder and CDMA RAKE receiver provides a significant gain in the BER performance over multi-user interference and multipath frequency selective fading channels.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1195-1201
• /
• 2005

This paper deals with procedures and results for teal time implementation of G.729 speech coder and channel coder including convolution codec, viterbi decoder, and interleaver using a fixed point DSP chip for radio communication systems. We described the method for real-time implementation based on integer simulation results and explained the implemented results by quality performance and required complexity for real-time operation. The required complexity was 24MIPS and 9MIPS in computational load, and 12K words and 4K words in execution code length for speech and channel. The functional evaluation was performed into two steps. The one was bit exact comparison with a fixed point C code, the other was executed by actual speech samples and error test vectors. Unlik other results such as individual implementation, We implemented speech and channel coders on a DSP chip with 160MIPS computation capability and 64 K words memory on chip. This results outweigh the conventional methods in the point of system complexity and implementation cost for radio communication system.