• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.156-160
• /
• 2002

In this paper, we have estimated by means of the theoretical analysis and the simulation of FCA(Fixed Channel Assignment) and CB(Channel Borrowing) in order to consider the CB as a technique to meet ducting interference from adjacent countries. Also, we assumed that the receiving power level of ducting interference with time rate can be characterized by the normal distribution due to the previous measured results, and the ducting interferences which are exceeding the reference power level can be regarded as calls. These calls can be processed by CR assignment and by which sharing channels between cells brings to us the method of meeting the ducting interference to use spectrum resources effectively. However, the spectrum frequency reusing and the interference effects between channels should be considered in CB simulation in the future.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.258-264
• /
• 2012

Although linear channel estimation for the frequency selective fading channel has been widely deployed, its accuracy depends on the number of pilots to probe the channel. Thus, it is unavoidable to employ large number of pilots to enhance the channel estimation performance, which essentially leads to the degradation of the transmission efficiency. It even does not utilize the sparseness of the multipath channel. In this paper a sparse channel estimation scheme based on the matching pursuit algorithm and a pilot assignment method, which minimizes the coherence, are proposed. The simulation results reveal that the proposed algorithm shows superior channel estimation performance with fewer pilots to the LS based ones.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.3
• /
• pp.692-698
• /
• 1999

In this paper, we proposed the channel assignment scheme for the CDMA(Code Division Multiple Access) cellular system using power allocation concept. Also, the performance of the proposed scheme was analyzed and it was compared with the channel assignment scheme using the fixed power allocation method in the CDMA cellular system. The proposed scheme allocates the power adaptively in according to the traffic loads and the traffic distribution pattern of neighbor cells in the forward link. We found that total call blocking probability (Pr) is more dependent on blocking probability($P_B$) than outage probability (Po) under physical number of channels ($C_{th}$)=30. Pr(Call Blocking Probability) is dependent on $P_B$(Blocking Probability) and Po(Outage Probability) at the same ratio under $C_{th}$=32, in which case P$P_{TA}$(blocking probability for the adaptive power allocation) is greater than $P_{TF}$(blocking probability for the fixed power allocation) about 6%.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.157-168
• /
• 1999

In this paper the new channel allocation method which is important in designing mobile radio system, is proposed. If the channel is allocated by time-frequency-code sliced and using DAMA scheduler, the blocking probability is lower than TA channel allocation method. With traffic load $\rho$=0.8 and 2% of blocking probability, TFS method can allocate 36 slices compared to 11 slices in TA method. At traffic load $\rho$=0.9 and 1% of blocking probability, the maximum available slices are 13 in TA method, but in TFS method 40 slices are allocated to user, so TFS method is better frequency availability by 3.75 times than TA method. TFS method could be suitable for system planning to multirate communication users.

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.375-381
• /
• 2012

If a mobile station requests a channel allocation in its mobile networks, the switching center assigns a channel to a mobile station that belongs to each base station. There are three kinds of channel allocation schemes; a fixed channel allocation, a dynamic channel allocation and a hybrid combination of these two forms. In assigning a good frequency, it is our intention to provide quality service to our customers as well as to use resources efficiently. This paper proposes methods of assigning frequencies that minimize interference between channels and that also minimize the amount of searching time involved. In this paper, we propose an algorithm to per specific equipment, regardless of the number of channels that can be used as a general-purpose system, such as base stations, control stations, central office model is proposed, the existing operators manner similar to the fixed channel allocation based statistics and assigned when the conventional method and the improved method is proposed. Different ways and compared via simulations to verify the effectiveness of the proposed approach.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3154-3164
• /
• 1996

A major concern in a cellular mobile communication system is how to efficiently utilize the limited amount of frequencies. Various channel assignment methods and traffic sharing schemes have been proposed to improve system performance. However, these approaches suffer from complicated software and hardware requirements due to increased amount of traffic control In this paper, we propose a new method for improving system performance by controlling the powers of the set-up and voice channels of each cell site. We first show that the average number of blocked calls in a system is minimized when the traffic reates are made identical for all cell sites in a system. This result, together with the relationship between the channel powers and the service area, is used to determine the appropriate channel powers of each cell site. We also determine the upper limit on the channel power of each cell site considering co-channel interference and numerically show that the proposed method is effective in reducing the number of blocked calls without an excessive increase in the amount of system control.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10a
• /
• pp.86-87
• /
• 2007

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.5
• /
• pp.577-582
• /
• 2012

If the mobile station requests the channel allocation in mobile networks, switching center is assigned a channel to mobile station that belong to each base station. Channel allocation schemes is a fixed channel allocation, dynamic channel allocation and a hybrid approach that combines the two forms. To assign a frequency well to use resources efficiently to provide quality service to our customers. In this paper, we proposed method to assign frequencies to minimize interference between channels and to minimizes the number of searching time. The proposed method by the genetic algorithm to improve accuracy and efficiency of the verification steps and reproduction stages were used. In addition, the proposed method by comparing with other methods showed that proposed method is better through the simulations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2010

PAPR of the pilot symbols can be reduced down by the CAZAC sequence in the SC-FDMA communication system. However, it is very complicated and takes quite a long time to compute the interpolation between the OFDM information symbols for the channel estimation because the pilot data are trasmitted in the block type. Furthermore, situation will be much more serious in the severe fading channel. Actually the pilot insertion of the comb type is much efficient and convenient for the channel estimation since the calculation of the interpolation can be made in the frequency domain symbol by symbol. But, the PAPR will be regrown when the pilot data are inserted with the information data in the comb type. So, in this paper, we like to study the PAPR reduction and comb type pilot assignment for the efficient channel estimation. Unlike the conventional SLM(selected mapping) method requiring the side information, our improved SLM method is to use the phase rotation sequence into information data without rotating phase of pilot. We use different pilot data according to the different phase rotation sequence. From the simulation result, it can be confirmed that when SLM method of 4 phase rotation sequence is used, PAPR is almost same to the block type method without pilot.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.7
• /
• pp.79-87
• /
• 1997

Untill now, the most well-known cofiguration for waveguide grating router(WGR) is composed of radiative star couplers and arrayed waveguide grating(AWG), which usually suffer form the rdiation loss of around 3dB or more. Therefore, te improved design of WGRs is needed to reduce the loss. In ths paper, we propose a novel WGR composed of multimode interference couplers which have good unifiormity, fabrication tolerance, and very low excess loss, and suggest the efficient algorithm to find the proper path length differences of AWG for given channel spacing and channel assignment to each output prot. The simulated spectral responses of the proposed WGR using the finite difference beam propagation method (BPM) show that the excess loss is less than 0.3dB and the crosstalk less than -25dB in case of 4x4 WGR, and the excess loss less than 0.4dB and the crosstalk less than -25dB in case of 8x8 WGR for all the channel wavelengths.