• 한국광학회지
• /
• 제35권3호
• /
• pp.107-114
• /
• 2024

본 연구에서는 다채널 결맞음 빔결합 시스템에서 공분산 행렬 적응 진화 전략(covariance-matrix-adaptation-evolution-strategy, CMA-ES) 알고리즘의 구현 가능성을 실험적으로 확인하였다. 파장이 635 nm인 결맞음 광원과 함께 공간 광 변조기를 다채널 위상 변조기 배열로 활용하는 다채널 결맞음 빔결합 시스템을 구성하고, 확률적 병렬 경사 하강(stochastic parallel gradient descent, SPGD) 및 CMA-ES 알고리즘을 결맞음 빔결합 시스템에 적용하여 획득한 두 알고리즘의 동작 특성을 비교하였다. 사각 구조인 16채널 및 벌집 구조인 19채널 결맞음 빔결합 시스템에서 두 알고리즘의 동작 특성을 평가한 결과 두 알고리즘의 동작 특성은 주어진 조건에서 평균적으로 유사하였으나, CMA-ES 알고리즘이 SPGD 알고리즘에 비해 초기 위상값 설정에 따른 동작 특성 변동이 상대적으로 작아 보다 안정적으로 동작할 수 있음을 확인하였다. 본 연구는 저자가 아는 범위 내에서 CMA-ES 위상제어 알고리즘을 다채널 결맞음 빔결합 시스템에 적용한 최초의 원리증명 시연이며, 향후 CMA-ES 위상제어 알고리즘에 기반한 다채널 결맞음 시스템에서 채널 수 증가 혹은 외부 위상잡음 효과 등을 실험적으로 연구할 때 유용하게 활용될 수 있을 것으로 기대된다.

• ETRI Journal
• /
• 제42권1호
• /
• pp.7-16
• /
• 2020

Assuming omnidirectional antenna reception, the ITU-R recently developed a new propagation model on building entry loss (BEL) for 5G millimeter-wave frequency sharing and compatibility studies, which is a simplified outdoor-to-indoor path loss model. Considering the utilization of high-gain narrow-beamwidth beamforming, the omnidirectional-based ITU-R BEL model may not be appropriate to predict propagation characteristics for directional beamforming scenarios. This paper studies the effects of beamwidth on the ITU-R BEL model. This study is based on field measurements collected with four different beamwidth antennas: omnidirectional, 10° horn, 30° horn, and 60° horn. The measurement campaigns were conducted at two types of building sites: traditional and thermally efficient buildings. These sites, as well as the measurement scenarios, were carefully chosen to comply with the ITU-R BEL measurement guidelines and the ITU-R building types. We observed the importance of accurate beam alignment from the BEL variation range. We were able to quantify the beamwidth dependency by fitting to a model that is inversely proportional to the beamwidth.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1618-1622
• /
• 2004

In this paper, the linearly interpolated PRC(Pseudo Range Correction) regenerating algorithm was applied to improve the DGPS(Differential Global Positioning System) positioning accuracy at user's spot by using the various PRC information obtained from multi-DGPS reference stations. The PRC information of each GPS satellite is not varying rapidly; it is possible to assume that the variation of PRC information of each GPS satellite is linear. So the linearly interpolated PRC regenerating algorithm can be applied to improve the DGPS positioning accuracy at user's spot by using the various PRC information obtained from multi-DGPS reference stations. To test the performance of the linearly interpolated PRC regenerating algorithm, maritime DGPS reference stations' PRC data was used in RTCM format. 11 maritime DGPS reference stations are in service providing DGPS information to public since 1999. Two set of 3 DGPS reference stations are selected to compare the performance of the linearly interpolated PRC regenerating algorithm. The DGPS positioning accuracy was dramatically improved about 40%. Linearly interpolated PRC regenerating algorithm adopted multi-channel DGPS receiver will be developed in near future.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2457-2460
• /
• 2003

There is a great demand to manipulate biological cell autonomously since biologist should spend much time to obtain skillful manipulation techniques. For this purpose, we propose a cell chip to control, carry, fix and locate the cell. In this paper, we focus on the cell rotator to rotate individual biological cell based on a micro fluidics technology. The cell rotator consists of injection hole and rotation well to rotate a biological cell properly. Under the variation of flow rate in injection hole, the angular velocity of a biological cell is evaluated to find the feasibility of the proposed rotation method. As a practical experiment, Zebrafish egg is employed. Based on this research, we find the possibility of non-contact rotation way that can highly reduce the damage of the biological cell during manipulation. To realize an autonomous biological cell manipulation, a cell chip with manipulation well and micro channel in this research will be utilized effectively in near future.

• 한국인터넷방송통신학회논문지
• /
• 제11권3호
• /
• pp.47-52
• /
• 2011

세 채널로 구성된 나노 크기의 플라즈마 방향성 결합기가 모드 결합효과와 립형 전송구조를 사용하여 설계되었다. 종방향 모드 전송선로 해석법을 이용하여 방향성 결합기에서 전파하는 빛의 전파특성과 설계특성들을 분석하였다. 전력분배기로 동작하는 플라즈마 방향성 결합기는 약 200~250 nm의 전송 폭을 갖는 나노 크기로 설계하였다. 최적의 전력분배율을 얻기 위하여 중심 채널의 폭 변화에 따른 전송 모드들의 굴절률을 분석하였다. 결국, 하향 채널에서 입사된 광 신호를 각 채널을 통하여 출력하는 나노 크기의 플라즈마 방향성 결합기가 설계되었다.

• 대한전자공학회논문지SD
• /
• 제43권2호
• /
• pp.34-41
• /
• 2006

본 논문에서는 PDC/GSM/EDGE/WCDMA를 동시에 지원하는 CMOS 다중 모드 기저대역 필터의 구조 및 새롭게 제안하는 자동 튜닝 방법을 제시한다. 기저 대역 채널 선택 필터를 구현하기 위해서 5차 Chebyshev 저대역 통과 필터를 설계하였다. 면적을 최소화하기 위해서 각 모드들 사이의 저항과 커패시터가 효율적으로 공유되었다. 또한, 공정 변화에 의한 영향을 상쇄시키기 위한 새로운 차단 주파수 튜닝 방법이 제안 되었다. 새로운 튜닝 방법은 면적과 MOS 스위치에 의한 노이즈의 영향을 줄일 수 있다.

• 한국환경과학회지
• /
• 제9권6호
• /
• pp.443-447
• /
• 2000

Chonan and Asan city have been a focal point due to rapid development as the first station for Express Railroad and key cities West Coast Development Region. Gokgyo stream adjacent to the cities plays an important role as a drainage channel for an agriculture and a discharger of urban storm water. Waster quality of the stream has been deteriorating caused by pollution sources such as a untreated wastewater discharge and runoff from the watershed. In the study, we conducted 4 surveys in April, May, July, and September to understand the current state of water quality for the stream and to make it possibe to predict future water-quality variation for future development. The system runs on a personal computer under the windows enviroment and provides extensive graphic user interface(GUI) for user-friendly assessment. Using the pull-down menus provided by the GUI panel, the user is able to operate the system by pointing and clicking the icon to identify the state of water-quality at locations concerned. Furthermore, we developed an integrated watershed management system. The constructed system could be a useful tool as a decesion maker for pollution source control strategy.

• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2005년도 춘계 학술대회 논문집
• /
• pp.62-69
• /
• 2005

Maneuverability of ships has been receiving a great deal of attention both concerning navigation safety and the prediction of ship maneuvering characteristics, to improve it. High-lift device could be applied to design of rudder at design stage. Now, we carried out the flow visualization and inversitgation of flow around a flap rudder (trailing-edge flap). Flow visualization results of flap defection shown as the flow around a NACA0020 Flap Rudder will be conducted in a Circulating Water Channel. The purpose of this investigation will be to investigate the development of the separation region on the flap rudder with the variation of angle of attack and determine the angle of attack at which the flow separates and reattaches.

• 한국해양공학회지
• /
• 제28권4호
• /
• pp.268-273
• /
• 2014

To investigate the turbulence characteristics within the boundary layer over a flat plate, an experimental study was performed using a PIV technique in a circular water channel. For two water velocities, 0.92 and 1.99 m/s, the water velocity profiles were taken and analyzed to determine turbulent characteristics such as the Reynolds stress, Taylor micro-length scale, and Kolmogorov length scale within the defect law region of the boundary layer. These analysis methods may be applied to research on the friction drag reduction technology using micro-bubbles or an air sheet over the surface of a ship's hull, because the physical reason for the friction drag reduction could be found by understanding the variation of the turbulence characteristics and structures in the boundary layer.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.419-424
• /
• 2002

The HANARO, a multi-purpose research reactor of 30 MWth open-tank-in-pool type, has been under normal operation since its initial criticality In February, 1995. Many experiments should be safely performed to activate the utilization of the HANARO. A flow simulation facility is being developed for the endurance test of reactivity control units for extended life times and the verification of structural integrity of those experimental facilities prior to loading in the HANARO. This test facility is composed of three major parts; a half-core structure assembly, flow circulation system and support system. The flow circulation system is composed of a circulation pump, a core flow pipe, a core bypass flow pipe and instruments. The system is to be filled with de-mineralized water and the flow should be met the design flow to simulate similar flow characteristics in the core channel of the half-core test facility to the HANARO. This paper, therefore, describes an analytical analysis to study the flow behavior of the system. The computational flow analysis has been performed for the verification of system pressure variation through the three-dimensional analysis program with standard k-$\epsilon$ turbulence model and for the verification of the structural piping integrity through the finite element method. The results of the analysis are satisfied the design requirements and structural piping integrity of flow circulation system.