• 제목/요약/키워드: Channel Variation

검색결과 799건 처리시간 0.034초

자연대류를 이용한 변압기용 방열기의 채널 구조가 방열성능에 미치는 영향 (EFFECT OF THE CHANNEL STRUCTURE ON THE COOLING PERFORMANCE OF RADIATOR FOR TRANSFORMER OF NATURAL CONVECTION TYPE)

  • 김다은;강상모;서용권
    • 한국전산유체공학회지
    • /
    • 제19권4호
    • /
    • pp.86-93
    • /
    • 2014
  • Increased demand of power-transformer's capacity inevitably results in an excessive temperature rise of transformer components, which in turn requires improved radiator design. In this paper, numerical simulation of the cooling performance of an ONAN-type (Oil Natural Air Natural) radiator surrounded by air was performed by using CFX. The natural convection of the air was treated with the full-model. The present parametric study considers variation of important variables that are expected to affect the cooling performance. We changed the pattern and cross-sectional area of flow passages, the fin interval, the flow rate of oil and shape of flow passages. Results show that the area of flow passage, the fin interval, the flow rate of oil and shape of flow passages considerably affect the cooling performance whereas the pattern of flow passages is not so much influential. We also found that for the case of the fin interval smaller than the basic design, the temperature drop decreases while a larger interval gives almost unchanged temperature drop, indicating that the basic design is optimal. Further, as the flow rate of oil increases, the temperature drop slowly decreases as expected. On the other hand, when the shape of flow passages are changed, temperature drop is increased, indicating that the cooling performance is enhanced thereupon.

공기를 작동 유체로 하는 열다이오드의 열성능에 관한 실험적 연구 (An Experimental Study on the Thermal Performance of Air Filled Thermal Diode)

  • 박이동;장영근;황인주
    • 태양에너지
    • /
    • 제17권2호
    • /
    • pp.35-42
    • /
    • 1997
  • 열다이오드란 유체의 밀도차에 기인한 대류에 의하여 일방향성 열전달이 주로 일어나며 역방향의 열전달은 미미하도록 고안된 장치이다. 본연구에서는 실용적인 측면에서 평행사변형 형상과 직사각형 형상을 조합하고 좌우에 수직 평판을 설치하였으며, 내부 안내판을 가진 공기식 열다이오드를 제작하여 천이 및 정상상태에 관한 연구를 하였다. 공급된 열속에 따른 $Gr^*$$1.11{\times}10^{10}{\sim}1.4{\times}10^{10}$ 사이에 존재하였고 전체 실험 과정에 있어서 $Gr^*$ 값은 ${\pm}3%$ 이내로 유지되었다. $Gr^*$의 증가에 따라 Nu값은 거의 선형적으로 증가하는 경향을 보였으며 guide vane의 유무와 유동통로의 깊이(channel depth)에 따라서는 민감한 경향을 보였다. 경사각의 변화에 따라 온도상태가 무차원시간 $0.5{\sim}0.6$ 에서 나타나는 것으로 보아 시스템의 특성으로 본다.

  • PDF

항공기 기반 단일채널 FMCW-SAR 영상 내 이동물체 분석기법 (Analysis Technique for Moving Targets on Single-Channel Airborne FMCW-SAR Image)

  • 황지환;김덕진
    • 한국전자파학회논문지
    • /
    • 제29권7호
    • /
    • pp.523-531
    • /
    • 2018
  • 본 논문에서는 항공기 기반 단일채널 FMCW-SAR(frequency modulated continuous wave - synthetic aperture radar) 복원영상 내 이동물체 분석을 위해 합성개구레이다의 모호성 함수(SAR ambiguity function)를 이용한 상대속도 분석기법에 대해 설명한다. 안테나와 이동물체 간의 상대속도 변화를 분석하기 위해서 FMCW 신호모델 기반 정지 이동물체 간 신호변환특성을 분석하고, 이동물체의 변환특성을 고려한 모호성 함수를 모의실험하였다. 복원영상 내 이동물체의 상대속도 변화는 도식화된 모호성 함수의 최고점으로부터 추정될 수 있으며, 상대속도의 변화가 클수록 정지 이동물체 구분이 가능하게 된다. 이를 실제 항공기 기반 관측 자료로부터 복원된 FMCW-SAR 영상에 적용하여 모호성 함수를 이용한 이동물체 식별과 상대속도 분석결과를 관측지역 내 실험조건과 비교분석하였다.

무인항공기 가시선 데이터링크 Ku 대역 RF 송수신 시스템 설계 (Ku-Band RF Transceiver System Design for UAV Line-Of-Sight Datalink)

  • 최재원;김지훈
    • 전자공학회논문지
    • /
    • 제51권9호
    • /
    • pp.46-53
    • /
    • 2014
  • 본 논문에서는 무인항공기 가시선 데이터링크 Ku 대역 RF 송수신 시스템을 설계하였다. RF 송수신 시스템은 송수신반, RF 전단반, 고출력증폭반으로 구성되어 있다. 송수신반은 주파수 상/하향 변환 기능과 채널 변경 기능을 제공하며, RF 전단반은 송/수신 신호 이중화, 안테나 선택, 소신호 증폭, 수신신호 외 주파수 필터링 기능을 제공한다. 고출력증폭반은 Ku 대역 전력증폭과 송신출력 가변(고/중/저/Mute) 기능을 제공한다. 송수신반의 주파수 상/하향 변환은 슈퍼헤테로다인 방식으로 구현하였다. RF 송수신 시스템은 대용량 고속 데이터의 신뢰성 있는 송수신을 위하여 광대역 고선형 특성을 갖도록 설계하였다. 또한, 무인항공기 운용 환경에 따른 주파수의 선택적 사용을 위하여 채널 변경이 가능하도록 설계하였다.

댐 침투수 탐지를 위한 멀티 채널 온도 모니터링 연구 (A Study on multi-channel temperature monitoring for the detection of leakage or seepage in dam body)

  • 오석훈;김중열;박한규;김형수;김유성
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.1211-1218
    • /
    • 2005
  • Temperature variation according to space and time on the inner parts of engineering constructions(e.g.: dam, slope) can be a basic information for diagnosing their safety problem. In general, as constructions become superannuated, structural deformation(e.g.: cracks, defects) could be occurred by various factors. Seepage or leakage of water through these cracks or defects in old dams will directly cause temperature anomaly. Groundwater level also can be easily observed by abrupt change of temperature on the level. This study shows that the position of seepage or leakage in dam body can be detected by multi-channel temperature monitoring using thermal line sensor. For this, diverse temperature monitoring experiments for a leakage physical model were performed in the laboratory. In field application of an old dam, temperature variations for water depth and for inner parts of boreholes located at downstream slope were measured. Temperature monitoring results for a long time at the bottom of downstream slope of the dam showed the possibility that temperature monitoring can provide the synthetic information about flowing path and quantity of seepage of leakage in dam body.

  • PDF

인지 무선 시스템에서 주파수 재사용율과 채널 추정에 따른 주파수 할당 방식의 성능 분석 (Performance Analysis of Frequency Allocation Methods Using Frequency Reuse and Channel Estimation in Cognitive Radio Systems)

  • 김태환;이태진
    • 한국통신학회논문지
    • /
    • 제34권5A호
    • /
    • pp.391-400
    • /
    • 2009
  • 최근 이동 통신 네트워크는 2G에서 3G로 이동하고 있으며 주파수의 효율성을 추구하고자 한다. 인지 무선 통신(Cognitive radio) 기술은 secondary 네트워크와 primary 네트워크의 공존을 허용함으로써 주파수의 효율성을 달성할 수 있는 기술로 떠오르고 있다. 하지만, primary 네트워크의 주파수 재사용율을 고려하지 않는 기존 인지무선 통신 방식은 primary 네트워크와 secondary 네트워크를 포함한 전체 네트워크의 성능을 저하시키게 된다. 본 논문에서는 secondary 네트워크가 primary 네트워크의 파일럿 신호를 감지하여 최적의 가용 주파수를 선택하는 복잡도가 낮은 방식을 제안한다. 그리고, primary 네트워크의 간섭을 최소화하는 제약조건을 가지면서 업링크와 다운링크의 용량을 최대화하는 최적화 문제를 고려한다. 시뮬레이션을 통하여 제안방법과 기존방법의 성능을 비교하였으며, 제안방법이 기존방법보다 primary 네트워크의 주파수 재사용율이 작고 채널 사용 변화가 심할 때 특히 우수한 성능을 보임을 확인할 수 있었다.

개수로 만곡부에서의 중심각 변화에 따른 흐름특성 (Flow Characteristics for the Variation of Total Angles in Open Channel Bends)

  • 이종태;윤세의
    • 대한토목학회논문집
    • /
    • 제7권3호
    • /
    • pp.195-202
    • /
    • 1987
  • 본 연구는 수심이 작은 만곡수호에서 중심각과 저면마찰의 변화에 따른 흐름특성을 분석하기 위하여 만곡부의 중심각이 $30^{\circ}$, $60^{\circ}$, $90^{\circ}$, $120^{\circ}$, $150^{\circ}$, $180^{\circ}$인 수로모형올 선택하였으며, 저면 마찰이 비교적 클 경우(C=30)와 작은 경우(C=60)로 구분하였다. 만곡수로내의 중심각 변화에 따른 수면형, 유속분포 및 유향 등에 관하여 검토하였다. 만곡수로내의 최대수위 발생지점은 중심각에 관계없이 만곡수로 입구로부터 $15^{\circ}$ 하류단면부근의 외측하단에서 발생된다. 저면마찰조건이 최대유속선의 이동경로에 미치는 영향은 만곡수로의 중심각이 약 $150^{\circ}$ 이상인 경우에서 뚜렷하다. 속도수두에 대한 횡방향 수면차의 비는 만곡수로의 중심각이 증가할수록 커지는 경향을 보여 주었다. 중심각에 관계없이 만곡부 시점에서의 유향은 내측으로 종점에서는 외측으로 편기된다.

  • PDF

Impact of the human body in wireless propagation of medical implants for tumor detection

  • Morocho-Cayamcela, Manuel Eugenio;Kim, Myung-Sik;Lim, Wansu
    • 인터넷정보학회논문지
    • /
    • 제21권2호
    • /
    • pp.19-26
    • /
    • 2020
  • This paper analyses the feasibility of using implantable antennas to detect and monitor tumors. We analyze this setting according to the wireless propagation loss and signal fading produced by human bodies and their environment in an indoor scenario. The study is based on the ITU-R propagation recommendations and prediction models for the planning of indoor radio communication systems and radio local area networks in the frequency range of 300 MHz to 100 GHz. We conduct primary estimations on 915 MHz and 2.4 GHz operating frequencies. The path loss presented in most short-range wireless implant devices does not take into account the human body as a channel itself, which causes additional losses to wireless designs. In this paper, we examine the propagation through the human body, including losses taken from bones, muscles, fat, and clothes, which results in a more accurate characterization and estimation of the channel. The results obtained from our simulation indicates a variation of the return loss of the spiral antenna when a tumor is located near the implant. This knowledge can be applied in medical detection, and monitoring of early tumors, by analyzing the electromagnetic field behavior of the implant. The tumor was modeled under CST Microwave Studio, using Wisconsin Diagnosis Breast Cancer Dataset. Features like the radius, texture, perimeter, area, and smoothness of the tumor are included along with their label data to determine whether the external shape has malignant or benign physiognomies. An explanation of the feasibility of the system deployment and technical recommendations to avoid interference is also described.

이퀄라이저 적응기를 포함한 12.5-Gb/s 저전력 수신단 설계 (A 12.5-Gb/s Low Power Receiver with Equalizer Adaptation)

  • 강정명;정우철;권기원;전정훈
    • 전자공학회논문지
    • /
    • 제50권12호
    • /
    • pp.71-79
    • /
    • 2013
  • 본 논문에서는 이퀄라이저 적응기(adaptation)를 포함하는 12.5 Gb/s 저전력 수신단 설계에 대해서 기술한다. 샘플러와 직렬 변환기를 사용한 저전력 아날로그 이퀄라이저 적응기를 구현함으로써 채널과 칩 공정 변화에 능동적으로 적응할 수 있으며 그 적응 원리에 대해서 설명한다. 또한 저전력을 위한 전압 모드 송신기의 접지 기반 차동 신호를 수신하는 기술에 대해서 설명하였다. 17.6 dB의 피킹 이득을 갖는 CTLE(Continuous Time Linear Equalizer)는 6.25 GHz에서 -21 dB 손실을 갖는 채널의 길게 늘어지는 ISI(Inter Symbol Interference)를 제거한다. 45 nm CMOS 공정을 이용하여 eye diagram에서 200 mV의 전압 마진과 0.75 UI의 시간 마진을 갖고 0.87 mW/Gb/s의 낮은 전력 소모를 유지한다.

Multi-channel 5Gb/s/ch SERDES with Emphasis on Integrated Novel Clocking Strategies

  • Zhang, Changchun;Li, Ming;Wang, Zhigong;Yin, Kuiying;Deng, Qing;Guo, Yufeng;Cao, Zhengjun;Liu, Leilei
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제13권4호
    • /
    • pp.303-317
    • /
    • 2013
  • Two novel clocking strategies for a high-speed multi-channel serializer-deserializer (SERDES) are proposed in this paper. Both of the clocking strategies are based on groups, which facilitate flexibility and expansibility of the SERDES. One clocking strategy is applicable to moderate parallel I/O cases, such as high density, short distance, consistent media, high temperature variation, which is used for the serializer array. Each group within the strategy consists of a full-rate phase-locked loop (PLL), a full-rate delay-locked loop (DLL), and two fixed phase alignment (FPA) techniques. The other is applicable to more awful I/O cases such as higher speed, longer distance, inconsistent media, serious crosstalk, which is used for the deserializer array. Each group within the strategy is composed of a PLL and two DLLs. Moreover, a half-rate version is chosen to realize the desired function of 1:2 deserializer. Based on the proposed clocking strategies, two representative ICs for each group of SERDES are designed and fabricated in a standard $0.18{\mu}m$ CMOS technology. Measurement results indicate that the two SERDES ICs can work properly accompanied with their corresponding clocking strategies.