• 제목/요약/키워드: Channel Variation

검색결과 799건 처리시간 0.028초

상향 링크 셀룰러 환경에서 반복 수신 기법을 적용한 부호화된 주파수 도약 OFDMA 시스템의 성능 (Performance of a Coded Frequency Hopping OFDMA System with an Iterative Receiver in Uplink Cellular Environments)

  • 김윤희;강성교
    • 한국통신학회논문지
    • /
    • 제30권11C호
    • /
    • pp.1108-1115
    • /
    • 2005
  • 패킷 기반 셀룰러 시스템의 상향 링크에서 동기 복조를 위해 LDPC 부호화된 주파수 도약 OFDMA 시스템에 알맞은 실제적인 반복 채널 추정 및 복호 기법을 제안한다. 제안한 기법은 파일롯 심볼과 LDPC 복호 결과를 함께 이용하여 반복적으로 채별 이득과 비균일 간섭 잡음을 추정함으로써 LDPC 복호 입력의 신뢰성을 향상시키고, 추정된 채별 상관 계수에 따라 채널 추정 필터를 선택함으로써 채널 변화를 잘 추적한다. 제안한 수신 기법의 성능을 다양한 채널 환경 및 수신 조건 아래 모의 실험한 결과 파일럿 심볼의 전력 증가 없이 채널 추정 성능을 향상시키고 비균일 셀간 간섭의 영향을 줄이는 것을 볼 수 있다.

ICP 식각 시스템에 의한 초전도 스트립 라인의 임계 특성 분석 (Analysis of the Critical Characteristics in the Superconducting Strip Lines by ICP Etching System)

  • 고석철;강형곤;최효상;양성채;한병성
    • 한국전기전자재료학회논문지
    • /
    • 제17권7호
    • /
    • pp.782-787
    • /
    • 2004
  • Superconducting flux flow transistor (SFFT) is based on a control of the Abrikosov vortex flowing along a channel. The induced voltage by moving of the Abrikosov vortex in an SFFT is greatly affected by the thickness, the width, and the length of channel. In order to fabricate a reproducible channel in the SFFT, we studied the variation of the critical characteristics of ${YBa}_2{Cu}_3{O}_7-\delta(YBCO)$ thin films with the etching time using ICP (Inductively coupled plasma) system. From the simulation, it was certified that the vortex velocity was increased in a low pinning energy at channel width 0,5 mm. The surfaces of YBCO thin film were etched by ICP etching system. We observed the etched channel surfaces by AFM (Atomic Force Microscope) and measured the critical current density with etching time. As a measured results, the etching thickness of channel should be optimized to fabricated a flux flow transistor with specified characteristics.

직교 주파수 분할 다중화 시스템의 공간 주파수 블록 코딩에서의 부호 반전 채널 스위칭 기법 (Sign Reversal Channel Switching Method for Space-Frequency Block Code in Orthogonal Frequency Division Multiplexing System)

  • 정혁구
    • 한국산업정보학회논문지
    • /
    • 제25권5호
    • /
    • pp.13-21
    • /
    • 2020
  • 이 논문은 직교 주파수 분할 다중화 시스템에 사용하는 공간 주파수 블록 코딩에서의 부호 반전 채널 스위칭 알고리즘을 제안한다. 소스 데이터를 다른 안테나로 보내는 경우에는 수신기는 바뀐 그 채널에 적합하도록 결합 방법을 바꾸어야 한다. 만일 미리 정의된 채널 스위칭 시퀀스를 모르는 수신기라면, 수신한 데이터를 정확하게 복호할 수 없게 된다. 채널 스위칭을 위한 송신 데이터를 바꾸는 경우에는 데이터 심볼들을 공간 주파수 블록 코딩 형식에 맞추어서 바꾸어야 한다. 이 논문에서는 송신 안테나 간의 데이터 심볼들을 바꾸는 것이 아닌 단지 부호 반전 방법을 제안한다. 이 방법을 사용하면 다른 결합 방법을 발생시킴으로써 수신기에서 간단한 암호화로 동작함을 보였다.

다양한 음성을 이용한 자동화자식별 시스템 성능 확인에 관한 연구 (Variation of the Verification Error Rate of Automatic Speaker Recognition System With Voice Conditions)

  • 홍수기
    • 대한음성학회지:말소리
    • /
    • 제43호
    • /
    • pp.45-55
    • /
    • 2002
  • High reliability of automatic speaker recognition regardless of voice conditions is necessary for forensic application. Audio recordings in real cases are not consistent in voice conditions, such as duration, time interval of recording, given text or conversational speech, transmission channel, etc. In this study the variation of verification error rate of ASR system with the voice conditions was investigated. As a result in order to decrease both false rejection rate and false acception rate, the various voices should be used for training and the duration of train voices should be longer than the test voices.

  • PDF

비대칭 DGMOSFET의 채널길이와 두께 비에 따른 문턱전압이하 스윙 분석 (Analysis of Subthreshold Swing for Ratio of Channel Length and Thickness of Asymmetric Double Gate MOSFET)

  • 정학기
    • 한국정보통신학회논문지
    • /
    • 제19권3호
    • /
    • pp.581-586
    • /
    • 2015
  • 본 연구에서는 비대칭 이중게이트 MOSFET의 채널길이와 채널두께의 비에 따른 문턱전압이하 스윙의 변화를 분석하고자한다. 비대칭 이중게이트 MOSFET는 상하단 게이트 구조를 달리 제작할 수 있어 단채널효과를 제어할 수 있는 요소가 증가한다는 장점이 있다. 특히 채널길이를 감소하였을 경우 문턱전압이하 스윙의 급격한 증가로 인한 특성저하 현상을 감소시킬 수 있다. 그러나 스켈링 이론에 따라 채널길이 감소에 따라 채널두께도 변화되어야하며 이에 문턱전압이하 스윙이 변화하게 된다. 그러므로 채널길이와 채널두께의 비가 문턱전압이하 스윙을 결정하는 중요 요소가 된다. 해석학적으로 문턱전압이하 스윙을 분석하기 위하여 해석학적 전위분포를 포아송방정식을 통하여 유도하였으며 다양한 채널길이 및 채널두께에 대하여 전도중심과 문턱전압이하 스윙을 계산한 결과 채널길이와 채널두께의 비에 따라 전도중심과 문턱전압이하 스윙이 변화한다는 것을 알 수 있었다.

수위유량곡선보정방법에 대하여 (A Method of Rating Curve Adjustment)

  • 박정근
    • 한국농공학회지
    • /
    • 제18권2호
    • /
    • pp.4116-4120
    • /
    • 1976
  • With the use of many rivers increased nearly to the capacity, the need for information concerning daily quantities of water and the total annual or seasonal runoff has became increased. A systematic record of the flow of a river is commonly made in terms of the mean daily discharge Since. a single observation of stage is converted into discharge by means of rating curve, it is essential that the stage discharge relations shall be accurately established. All rating curves have the looping effect due chiefly to channel storage and variation in surface slope. Loop rating curves are most characteristic on streams with somewhat flatter gradients and more constricted channels. The great majority of gauge readings are taken by unskilled observers once a day without any indication of whether the stage is rising or falling. Therefore, normal rating curves shall show one discharge for one gauge height, regardless of falling or rising stage. The above reasons call for the correction of the discharge measurements taken on either side of flood waves to the theoretical steady-state condition. The correction of the discharge measurement is to consider channel storage and variation in surface slope. (1) Channel storage As the surface elevation of a river rises, water is temporarily stored in the river channel. There fore, the actual discharge at the control section can be attained by substracting the rate of change of storage from the measured discharge. (2) Variation in surface slope From the Manning equation, the steady state discharge Q in a channel of given roughness and cross-section, is given as {{{{Q PROPTO SQRT { 1} }}}} When the slope is not equal, the actual discharge will be {{{{ { Q}_{r CDOT f } PROPTO SQRT { 1 +- TRIANGLE I} CDOT TRIANGLE I }}}} may be expressed in the form of {{{{ TRIANGLE I= { dh/dt} over {c } }}}} and the celerity is approximately equal to 1.3 times the mean watrr velocity. Therefore, The steady-state discharge can be estimated from the following equation. {{{{Q= { { Q}_{r CDOT f } } over { SQRT { (1 +- { A CDOT dh/dt} over {1.3 { Q}_{r CDOT f }I } )} } }}}} If a sufficient number of observations are available, an alternative procedure can be applied. A rating curve may be drawn as a median line through the uncorrected values. The values of {{{{ { 1} over {cI } }}}} can be yielded from the measured quantities of Qr$.$f and dh/dt by use of Eq. (7) and (8). From the 1/cI v. stage relationship, new vlues of 1/cI are obtained and inserted in Eq. (7) and (8) to yield the steady-state discharge Q. The new values of Q are then plotted against stage as the corrected steadystate curve.

  • PDF

전광섬유형 8채널 DWDM용 광다중화기의 온도보상 특성 (Temperature Compensation of 8 Channel DWDM Multiplexer Using All Optical fiber Mach-Zehnder Structure)

  • 장진현;정진호;김영권
    • 한국통신학회논문지
    • /
    • 제30권8A호
    • /
    • pp.697-704
    • /
    • 2005
  • 온도보상 패키지를 적용하여 1000Hz 채널간격을 갖는 DWDM용 8채널 광다중화기를 제작하였다. 8채널 광다중화기는 전광섬유형 Mach Zehnder 간섭계(MZI)를 3단으로 다단 연결하여 제작되었으며, 광 다중화기 채널별 출력파장의 삽입손실을 균일하게 하기 위하여 파장에 대한 삽입손실변화가 적은 파장무의존형 커플러(WFC)를 이용하여 전광섬유형 MZI를 제작하였다. 전용 제작 장치를 이용하여, 전광섬유형 MZI를 제작하였으며, 미세한 파장을 조절하기 위해서, $CO_2$ 레이저를 이용하였다. 광 다중화기의 출력중심파장이 주위온도변화에 영향을 받지 않도록 하기 위해서 별도의 외부 온도제어기를 사용하지 않은 온도보상 패키지가 적용되었다. 제작된 8채널 광 다중화기는 평균 삽입손실 2.1dB, 5.5dB에서의 통과대역폭이 0.8nm 이며, 2.1dB의 채널 Crosstalk를 갖는 특성을 얻을 수 있었다. 이때 편광의존 손실은 0.06dB이며, $60^{\circ}C$ 정도의 주위온도 변화에 대해서 출력파장 0.05nm이내에서 변하도록 제작할 수 있다.

Reconfigurable FIR Filter for Dynamic Variation of Filter Order and Filter Coefficients

  • Meher, Pramod Kumar;Park, Sang Yoon
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제16권3호
    • /
    • pp.261-273
    • /
    • 2016
  • Reconfigurable finite impulse response (FIR) filters whose filter coefficients and filter order change dynamically during run-time play an important role in the software defined radio (SDR) systems, multi-channel filters, and digital up/down converters. However, there are not many reports on such reconfigurable designs which can support dynamic variation of filter order and filter coefficients. The purpose of this paper is to provide an architectural solution for the FIR filters to support run-time variation of the filter order and filter coefficients. First, two straightforward designs, namely, (i) single-MAC based design and (ii) full-parallel design are presented. For large variation of the filter order, two designs based on (iii) folded structure and (iv) fast FIR algorithm are presented. Finally, we propose (v) high throughput design which provides significant advantage in terms of hardware and/or time complexities over the other designs. We compare complexities of all the five structures, and provide the synthesis results for verification.

흐름 단면(斷面)의 급변화(急變化)에 의한 순환(循環)의 수치모형(數値模型) (Numerical Model of Circulation due to Sudden Variation of Flow Section)

  • 서승원;박정응;윤태훈
    • 대한토목학회논문집
    • /
    • 제3권4호
    • /
    • pp.21-31
    • /
    • 1983
  • 흐름단면(斷面)이 급변화(急變化)하는 개수로(開水路)의 순환현상(循環現象)을 깊이에 대하여 적분(積分)한 2차원(次元) Navier Stockes 연속방정식(方程式)을 Galerkin 형(型) 유한요소법(有限要素法)을 이용(利用)하여 수치적(數値的)으로 해석하였다. 1차원구형수로(次元矩形水路)의 수치해석(數値解析)에서 implicit 방법(方法)과 explicit 방법(方法)을 적용(適用)한 결과(結果) 수치해(數値解)는 정확해(正確解)와 잘 맞았으며, 확대부(擴大部)가 있는 개수로(開水路)에서는 수치실험(數値實驗)에 의해 예상(豫想)된 흐름 상태(狀態)가 얻어졌으며 순환(循環)의 중심(中心)은 기하학적(幾何學的) 중심(中心)과 일치하였으나 유속(流速)의 크기는 작게 나타나 개선(改善)이 요망된다. 교각(橋脚) 등(等)의 장애물(障碍物)이 있는 수로(水路)에서 수치모형(數値模型)에 의해 계산(計算)한 수면곡선(水面曲線)은 수리모형실험결과(水理模型實驗結果)와 근사(近似)하게 나타나 배수영향(背水影響)을 해석할 수 있는 수단(手段)으로서 개발가능성을 제시하는 것으로 판단된다.

  • PDF

주파수 가변 비동기 모노펄스 시스템의 모노펄스 기울기 교정 (Monopulse Slope Calibration in Frequency Agile Noncoherent Monopulse System)

  • 김소수;염경환
    • 한국전자파학회논문지
    • /
    • 제18권11호
    • /
    • pp.1299-1308
    • /
    • 2007
  • 본 논문에서는 주파수 가변 비동기 모노펄스 시스템에서 추정각 변화량을 최소화하기 위한 모노펄스 기울기 교정 방법을 제시하였다. 이를 위해 우선 안테나 및 RF 수신기의 수신 채널간 이득 및 위상 불균형에 의한 모노펄스 기울기 특성을 분석하였고, 안테나를 포함한 RF 수신기의 채널간 이득 및 위상 불균형을 최소화하기 위한 교정 방법을 제시하였다. 또한, IF 수신기의 채널간 상대 이득 불균형에 의한 영향을 최소화하기 위해 채널 절체를 통한 교정 방법을 제시하였다. 제시된 방법들에 의한 교정 결과, 주어진 주파수 대역폭 내에서의 측정된 평균모노펄스 기울기는 -0.96이 되었으며, 추정각 변화량은 이론값과 유사한 방위각 ${\pm}2^{\circ}$에서 최대 $0.15^{\circ}$, 방위각 $0^{\circ}$에서 최대 $0.03^{\circ}$가 되었다.