• Journal of Communications and Networks
• /
• v.7 no.2
• /
• pp.157-170
• /
• 2005

The combination of multiple antennas and multi-carrier code division multiple-access (MC-CDMA) is a strong candidate for the downlink of the next generation mobile communications. The study of such systems in scenarios that model real-life trans-missions is an additional step towards an optimized achievement. We consider a realistic MIMO channel with two or four transmit antennas and up to two receive antennas, and channel state information (CSI) mismatches. Depending on the mobile terminal (MT) class, its number of antennas or complexity allowed, different data-rates are proposed with turbo-coding and asymptotic spectral efficiencies from 1 to 4.5 bit/s/Hz, using three algorithms developed within the European IST-MATRICE project. These algorithms can be classified according to the degree of CSI at base-station (BS): i) Transmit space-frequency prefiltering based on constrained zero-forcing algorithm with complete CSI at BS; ii) transmit beamforming based on spatial correlation matrix estimation from partial CSI at BS; iii) orthogonal space-time block coding based on Alamouti scheme without CSI at BS. All presented schemes require a reasonable complexity at MT, and are compatible with a single-antenna receiver. A choice between these algorithms is proposed in order to significantly improve the performance of MC-CDMA and to cover the different environments considered for the next generation cellular systems. For beyond-3G, we propose prefiltering for indoor and pedestrian microcell environments, beamforming for suburban macrocells including high-speed train, and space-time coding for urban conditions with moderate to high speeds.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.7
• /
• pp.449-458
• /
• 2014

In the context-aware services, localization is an important technical element. Due to the easy to use and low cost, it was widely enabled with RF properties such as RSSI. However, RSSI is known to be not appropriated for indoor localization, because it tends to show big variance in time and is greatly effected with the multipath. This paper proposes a distance estimation process and its constituted methods for indoor localization, by making use of the other WLAN's RF property, CSI(Channel State Information). Firstly we define a comprehensive localization process, and suggest a calibration algorithm of environment factors in the path loss propagation model. Then, by implementing them with a commercial WLAN module, an the proposed process and methods are evaluated in terms of usefulness.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.2
• /
• pp.71-77
• /
• 2019

With 5G standards proceeding in earnest and increasing demand for services of indoor localization, research on indoor location recognition is being studied in various industrial fields, and research based on fingerprint recognition technology using Wireless Local Area Network (WLAN) is representative. In this paper, we propose an indoor positioning system based on fingerprinting technique that uses Cloud Radio Access Network (C-RAN) architecture and Channel State Information (CSI). In order to improve the performance in indoor positioning, we combined existing fingerprinting method and K nearest neighbor (KNN) technology which is one of the machine running technique. The performance improvements of the proposed indoor positioning system was verified by comparative experiments with the existing localization technique in a indoor localizztion testbed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6A
• /
• pp.405-419
• /
• 2012

In this paper, we propose a joint base station(BS) and relay precoders design in multi-relay aided multi-user all-multiple-input multiple-output(MIMO) system. The design criterion is to minimize user sum mean square error(SMSE) with relay sum power constraint(RSPC) where only local channel state information(CSI)s are available at relays. Local CSI at a relay is defined as the CSI of the channel which the relay itself accesses, out of among all the 1st hop and the 2nd hop channel in the system. With BS precoder structure which is concatenated with block diagonalization(BD) precoder, each relay can determine its own precoder using only local CSI. Proposed scheme is based on sequential iteration of two stages; stage 1 determines BS precoder and relay precoders jointly with SMSE duality, and stage 2 determines user receivers. Proposed scheme can be demonstrated theoretically to be always converge. We verify that proposed scheme outperforms simple amplify-and-forward(SAF), MMSE relay, and proposed schemes in [1] in terms of both SMSE and sum-rate performances.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.3
• /
• pp.1098-1112
• /
• 2018

Achievable sum rate and energy efficiency (EE) are investigated for the massive multiple-input multiple-output (Massive MIMO) downlink with channel aging in the time varying Ricean fading channel. Specifically, the expression of the achievable sum rate of the system for the maximum ratio transmission (MRT) precoder with aged channel state information (CSI) in the time varying Ricean fading channel is first presented. Based on the expression, the effect of both channel aging and the Ricean factor on the power scaling law are studied. It is found that the transmit power of base station (BS) is scaled down by $1/{\sqrt{M}}$(where M is the number of the BS antennas) when the Ricean factor K is equal to zero (i.e., time varying Rayleigh fading channel), indicating that aged CSI does not affect the power scaling law. However, the transmit power of the BS is scaled down by 1/M for the time varying Ricean fading channel (where $K{\neq}0$) indicating that the Ricean factor affects the power scaling law and sum rate, and channel aging only leads to a reduction of the sum rate. Second, the EE of the system is analyzed based on the general power consumption model. Both the theoretical analysis and the simulations show that the channel aging could degrade the sum rate and the EE of the system, and it does not affect the power scaling law.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12A
• /
• pp.1146-1152
• /
• 2005

In this paper, we propose a compressed quantized channel state information (CQCSI) feedback scheme for multi-carrier mobile communication systems. The proposed CQCSI figures out the contiguous subsequences of equal QCSI's as separate types of runs across the subcarriers, and then encodes the types of runs using a truncated Huffman coding algorithm. Computer simulation shows that the proposed algorithm can reduce the QCSI feedback up to one tenth of the uncompressed, while providing a comparable performance with the conventional QCSI feedback schemes. To cope with special cases when the frequency selective fading is very high, we also propose a restricted CQCSI feedback scheme. The restricted CQCSI feedback has been proved under vehicular B channel model.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.3
• /
• pp.169-173
• /
• 2020

Location-based services are used as core services in various fields. In particular, in the field of public services such as emergency rescue, accurate location estimation technology is very important. Recently, the technology of tracking the location of self-isolation subjects for COVID-19 has become a major issue. Therefore, location estimation technology using personal smart devices is being studied in various ways, and the most widely used method is to use GPS. Other representative methods are using Wi-Fi, Pedestrian Dead Reckoning (PDR), Bluetooth Low Energy (BLE) beacons, and LTE signals. In this paper, we introduced a positioning technology using deep learning based on LTE Channel State Information-Reference Signal (CSI-RS) data, and confirmed the possibility through an outdoor location estimation experiment using a commercial LTE signal.

• Journal of Communications and Networks
• /
• v.18 no.2
• /
• pp.173-181
• /
• 2016

In this paper, we address a new robust optimization problem in a multiuser multiple-input single-output broadcasting system with simultaneous wireless information and power transmission, where a multi-antenna base station (BS) sends energy and information simultaneously to multiple users equipped with a single antenna. Assuming that perfect channel-state information (CSI) for all channels is not available at the BS, the uncertainty of the CSI is modeled by an Euclidean ball-shaped uncertainty set. To optimally design transmit beamforming weights and receive power splitting, an average total transmit power minimization problem is investigated subject to the individual harvested power constraint and the received signal-to-interference-plus-noise ratio constraint at each user. Due to the channel uncertainty, the original problem becomes a homogeneous quadratically constrained quadratic problem, which is NP-hard. The original design problem is reformulated to a relaxed semidefinite program, and then two different approaches based on convex programming are proposed, which can be solved efficiently by the interior point algorithm. Numerical results are provided to validate the robustness of the proposed algorithms.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.711-732
• /
• 2019

Many unmanned aerial vehicle (UAV) applications have been employed for performing data collection in facilitating tasks such as surveillance and monitoring objectives in remote and dangerous environments. In light of the fact that most of the existing UAV relaying applications operate in conventional half-duplex (HD) mode, a full-duplex (FD) based UAV relay aided wireless network is investigated, in which the UAV relay helps forwarding information from the source (S) node to the destination (D). Since the activated UAV relays are always floating and flying in the air, its channel state information (CSI) as well as channel capacity is a time-variant parameter. Considering decode-and-forward (DF) relaying protocol in UAV relays, the cooperative relaying channel capacity is constrained by the relatively weaker one (i.e. in terms of signal-to-noise ratio (SNR) or signal-to-interference-plus-noise ratio (SINR)) between S-to-relay and relay-to-D links. The channel capacity can be optimized by adaptively optimizing the transmit power of S and/or UAV relay. Furthermore, a hybrid HD/FD mode is enabled in the proposed UAV relays for adaptively optimizing the channel utilization subject to the instantaneous CSI and/or remaining self-interference (SI) levels. Numerical results show that the channel capacity of the proposed UAV relay aided wireless networks can be maximized by adaptively responding to the influence of various real-time factors.

• Journal of information and communication convergence engineering
• /
• v.4 no.4
• /
• pp.136-140
• /
• 2006

In this paper, we consider the detection of orthogonal space-time block codes (OSTBCs) without channel state information (CSI) at the receiver. Based on the conventional blind cyclic decoder, we propose an enhanced blind cyclic decoder which has higher system performance than the conventional one. Furthermore, the proposed decoder offers low complexity since it does not require the computation of singular value decomposition.