• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.298-303
• /
• 2013

Magnetic abrasive polishing is one of the most promising finishing methods applicable to complex surfaces. Nevertheless this process has a low efficiency when applied to very hardened materials. For this reason, EP-MAP hybrid process was developed. EP-MAP process is expected to machine complex and hardened materials. In this research, deburring process using EP-MAP hybrid process was proposed. EP-MAP deburring process is applied to micro channel, thereby it can obtain both deburring process and polishing process. EP-MAP deburring process on the micro channel was performed. Through design of experiment method, error of height in this process according to process parameter is analyzed. When the level 1 parameter A(magnetic flux density) and level 2 parameter B(electric potential), C(working gap) and level 3 parameter D(feed rate) are applied in the deburring process using EP-MAP hybrid process, it provides optimum result of EP-MAP hybrid deburring process.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권4호
• /
• pp.1927-1943
• /
• 2016

Jitterbug is a passive network covert timing channel supplying reliable stealthy transmission. It is also the basic manner of some improved covert timing channels designed for higher undetectability. The existing entropy-based detection scheme based on training sample binning may suffer from model mismatching, which results in detection performance deterioration. In this paper, a new detection method based on the feature of Jitterbug covert channel traffic is proposed. A fixed binning strategy without training samples is used to obtain bins distribution feature. Coefficient of variation (CV) is calculated for several sets of selected bins and the weighted mean is used to calculate the final CV value to distinguish Jitterbug from normal traffic. Furthermore, the timing window parameter of Jitterbug is estimated based on the detected traffic. Experimental results show that the proposed detection method can achieve high detection performance even with interference of network jitter, and the parameter estimation method can provide accurate values after accumulating plenty of detected samples.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권7호
• /
• pp.3156-3167
• /
• 2020

One drawback of polar codes is that they are not universal, that is, to achieve optimal performance, different polar codes are required for different kinds of channel. This paper proposes a polar code construction scheme for Nakagami-m fading channel. The scheme fully considers the characteristics of Nakagami-m fading channel, and uses the optimized Bhattacharyya parameter bounds. The constructed code is applied to an orthogonal frequency division multiplexing (OFDM) system over Nakagami-m fading channel to prove the performance of polar code. Simulation result shows the proposed codes can get excellent bit error rate (BER) performance with successive cancellation list (SCL) decoding. For example, the designed polar code with cyclic redundancy check (CRC) aided SCL (L = 8) decoding achieves 1.1dB of gain over LDPC at average BER about 10^-5 under 4-quadrature amplitude modulation (4QAM) while the code length is 1024, rate is 0.5.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1150-1155
• /
• 2008

Parameter analysis has been performed for an equal channel angular process. The processing variables such as channel configuration, friction coefficient, and ram speed were investigated by means of the magnitudes and distributions of effective plastic strain analysis through the deformation. The materials considered were pure aluminum and titanium. Here firstly, a finite element implementation by using the commercial ABAQUS software was carried out for both the aluminum and titanium materials based on the L-channel configuration. The experimental investigation then has been conducted using the obtained data. Finally, the ability of robust metals which can be produced by the optimized ECAP has been discussed by the appropriate parameter analysis.

• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.455-461
• /
• 2008

EDCA (Enhanced Distributed Channel Access)는 무선 로컬 네트워크에서 QoS를 지원하기 위해 IEEE 802.11e 표준에서 채택한 채널 접근 방법이다. EDCA는 트래픽을 몇 개의 범주로 분류하고 각 범주마다 채널 접근 매개변수 값을 달리 갖도록 하여 서비스 차등화를 제공한다. 본 논문에서는 비실시간 트래픽에 대해서는 처리량(throughput)을 최대화하면서 실시간 트래픽에 대해서는 지연 및 처리량 제약조건을 만족시키도록 EDCA 매개변수를 트래픽 환경에 동적으로 적응시키는 기법을 제안한다. 이를 위해, 먼저 EDCA 매개 변수 값의 조합이 갖는 공간을 효율적으로 탐색하는 설계 단계 알고리즘을 개발한다. 그리고 이 알고리즘을 이용하여 각 예상되는 트래픽 환경에 대해 지연-처리량 이득/손실에 대한 파레토 커브 (Pareto curve)를 유도한다. 이 파레토 데이터베이스는 트래픽 환경 및 관리 정책에 따라, 최적으로 매개변수를 조절하는데 사용될 수 있다. 시뮬레이션에 따르면, 표준에서 제시된 매개변수 값을 이용하는 경우에 비해서, 제안된 방법이 실시간 트래픽의 지연 및 처리량 보장에 탁월한 성능을 보이며 비실시간 트래픽의 처리량을 평균적으로 12% 증가시키는 것으로 나타났다.

• 한국환경과학회지
• /
• 제17권7호
• /
• pp.783-793
• /
• 2008

The purpose of this study is to analyze the sensitivity of the RMA2 model parameters reflecting the flow characteristics of stream junction and thus understand the hydraulic characteristics of the channel confluence flow. This study dealt with the input parameters of the RMA-2 model, a two-dimensional numerical analysis model widely used for researches both at home and abroad. The parameters of the RMA-2 model are roughness coefficient, turbulent diffusion coefficient, Coriolis forces latitude, Density, and mesh size. This study those parameters estimated from actual heavy rainfall, and varied the parameter size by (-)30%${\sim}$+30% to review the characteristics of the flow characteristics of the channel section. Weobserved that when the ratio of the channel width was relatively small, the smaller the approaching angle was, the farther from the junctions became the generating place of the maximum flow velocity, however, when the ratio of the channel width was relatively large, the larger the approaching angle was, the farther the generating place of the maximum flow velocity from the junctions became. In particular, the distance between junctions and the place where the maximum flow velocity generated showed an absolute correlationover 90% of the relative channel width, but an inverse relationwas found when the distance to the place where the flow velocity generated was shortened as relative the channel width between the main channel and tributary increased.

• 물과 미래
• /
• 제23권3호
• /
• pp.385-395
• /
• 1990

측방유입수가 고려되는 3변수 Muskingum하도추적모형을 낙동강 수계중 왜관에서 적포교구간의 12개 홍수사상에 대하여 적용하였고, 기존 방법인 2변수 Muskingum방법의 저류상수 K와 가중계수 x에 추가된 α는 측방유입수를 고려해주는 변수이다. 3변수모형의 추적방정식은 유한차분방정식으로 표현되며, 추적상수 결정은 Matrix Inversion에 의하여 직접 계산 가능하며, 이로부터 각 홍수사상의 K x 값을 구할 수 있다. 본 연구를 실유역에 적용하여 실측치와 비교하여본 결과 비교적 잘 맞음을 알 수 있어쓰ㅇ며 K와 x값은 하도특성인자로서 홍수규모와 관계되고 측방유입인자 α는 강우 특성에 의하여 지배되는 변수로 판단되었으며 α값은 측방유입량이 클수록 값이 커지는 성향으로 나타났다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제6권4호
• /
• pp.276-280
• /
• 2017

This paper presents computationally efficient image compression for wireless transmission of high-definition video, to adaptively utilize available channel bandwidth and improve image quality. The method indirectly predicts an unknown available channel bandwidth by monitoring encoder buffer status, and adaptively controls a quantization parameter to fully utilize the bandwidth. Experimental results show that the proposed method is robust to variations in channel bandwidth.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.39-40
• /
• 2006

This paper modeled UWB system transmission channel in indoor environment. For channel modeling, we extracted transmission channel parameter, and then measured from 10MHz to 16.01GHz by using method of CIR(Channel Impulse Response) and CTF(Channel Transfer Function) in small room($5.5{\times}5.5m^2$) environment.

• 대한음성학회지:말소리
• /
• 제43호
• /
• pp.179-188
• /
• 2002

Improving the recognition performance of connected digit telephone speech still remains a problem to be solved. As a basic study for it, this paper analyzes the variation of feature parameters of Korean digit telephone speech according to channel distortion. As a feature parameter for analysis and recognition MFCC is used. To analyze the effect of telephone channel distortion depending on each call, MFCCs are first obtained from the connected digit telephone speech for each phoneme included in the Korean digit. Then CMN, RTCN, and RASTA are applied to the MFCC as channel compensation techniques. Using the feature parameters of MFCC, MFCC+CMN, MFCC+RTCN, and MFCC+RASTA, variances of phonemes are analyzed and recognition experiments are done for each case. Experimental results are discussed with our findings and discussions