• International Journal of Automotive Technology
• /
• v.8 no.1
• /
• pp.119-126
• /
• 2007

Because of the low temperature operation, proton exchange membrane (PEM) fuel cell has a water phase transition. Therefore, water management is an important operation issue in a PEM fuel cell because the liquid water in the fuel cell causes electrode flooding that can lower the cell performance under high current density conditions. In this study, in order to understand the reactant distributions in the cathode channels of the PEM fuel cell, an experimental technique that can measure the species concentrations of reactant gases by using gas chromatograph (GC) is applied for an operating PEM fuel cell. The oxygen distribution along the cathode flow channels of PEM fuel cell is mainly investigated with various operating conditions. Also, the relations between cathode flooding and oxygen concentrations and oxygen consumption pattern along the cathode channel configurations of the unit cell adopted for this study are discussed using GC measurement and visualization experiment of cathode flooding. It is found that the amount of oxygen consumption is very sensitive to various operating conditions of the fuel cell and was much affected by the flooding occurrence in cathode channels.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.1
• /
• pp.14-28
• /
• 2003

The macrobenthic faunal community of Gwangyang Bay comprised 154 species and showed the overall mean density of 1,286 individuals/$m^2$. Polychaetes were the most important component of the macrofaunal community in species richness, abundance and biomass. The dominant species in abundance were poly-chaetes like Tharyx sp.(44.8%), Lumbrineris longifolia(14.0%), Heteromastus filiformis(3.6%), a mussel Mytilus edulis, and an amphipod crustacean Corophium sinense. The abundance and biomass in the western part of the bay were lower than in the channel regions and mouth of the bay. The community indices showed the same trend in the spatial distribution with the abundance and species richness. The study area can be divided into seven station groups； five station groups in the eastern part, two groups in the channel and open mouth part of the bay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1755-1763
• /
• 1998

The rain attenuatio of a radio channel above 10 GHz can have impact on the availability of the radio channel. The severity of the rain impairments increases with frequency and varies with regional location. This paper presents an estimation method for rain attenuation for millimeter-wave propagation in domestic environments. the dropsize distribution is assumed to be exponential, and the measurement data in the various countries which are simlar to the domestic environments are compared with the theoretical one by varying the dropsize distribution. A rain-rate conversion model which can convert .tau.-minutes rain-rate data to 1-minute rain-rate data for domestic environments is also discussed. Using the converted domestic rain-rate data, probabilty distributions of rain attenuation are computed.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.6
• /
• pp.598-604
• /
• 2007

The purpose of this study is to establish the predictive method of welding distortion and residual stress for the channel I butt SA (submerged arc) weldment using FEA. In order to do it, the heat input model for the weldment was defined as the combined heat source with the surface heat flux of gaussian distribution and volumetric heat source uniformly distributed within weld groove by comparing the shapes of molten pool and temperature distribution obtained by FEA with those of experiments. The arc efficiency of SA welding for two-dimensional FE analysis was evaluated as 0.85. The welding distortion and residual stress of the weldment obtained by FEA and heat input model proposed have a good agreement with those obtained by experiment. Based on the results, it was suggested that the proper heat input model should be required to evaluate the welding distortion for weldment.

• Journal of Distribution Science
• /
• v.15 no.6
• /
• pp.5-12
• /
• 2017

Purpose - This study is to investigate the effects of consumption values of retailers on the importance of store attributes, and to determine the influence on the consumption values of consumers who shop at complex shopping malls on the empirical and functional attributes in those malls as well as on the influence of on/off-line channels. Research design, data, and methodology - With 344 surveyed questionnaires, this study was conducted by using SPSS 22.0 to verify the reliability and validity of the measured variables. Structural equation model (SEM) was employed as a statistical method for the hypotheses test of this study. Results - The results showed that hedonic value has more influence on the importance of empirical attribute than that of functional attribute in shopping malls. In addition, practical value has more influence on functional attributes than empirical properties of shopping malls. However, these relationships showed the difference in on/off-line channels. As for off-line channels, consumers' consumption values were more influential on empirical attributes, while functional attributes were more important in on-line channels Conclusions - This study analyzed the influence on the importance of the consumption values in store attributes, and the effects of each channel with suggesting practical implications.

• Journal of the Korean Society of Combustion
• /
• v.18 no.3
• /
• pp.24-30
• /
• 2013

Flame stabilization characteristics of premixed flames in an annular coaxial 5-tubes burner (AC5TB) were investigated experimentally. The AC5TB was made of five quartz tubes, and the flame stabilization conditions in that burner were investigated with the variation of equivalence ratio and the flow velocities. Flame behaviors inside of narrow annular tubes could be observed directly. Overall flame stabilization conditions were similar to that of the previous study, while the flame behaviors and structures were different mainly due to the controlled uniform distribution of the velocities in channels. Flame flashback conditions were thought to be governed by the competition between heat release rate, heat loss and heat recirculation in each channel. Stationary flames at a fixed location were compared in its velocity distribution and burned gas temperature across the channel. This AC5TB can be a basic configuration for the development of flame stabilization model of porous media combustors, and it will help understand about the real behavior of flames in meso-scale combustion spaces.

• Journal of the Korean Geophysical Society
• /
• v.7 no.2
• /
• pp.151-155
• /
• 2004

To solve the urban flood problems, it must get the enough channel conveyances and pumping capacities. It needs set up the detention system to control the flow over the channel capacity. Inspite of this detention system, the peak flow may increased by rainfall distribution and the delay of flow. This shows a design model of detention system which can consider the time problems from mutual connections of the detention storages and pumping flow using IDP(Incremental Dynamic Programming) method.

• The Journal of Industrial Distribution & Business
• /
• v.13 no.12
• /
• pp.43-57
• /
• 2022

Purpose: Despite the numerous studies on factors impacting pro-environmental behavior, actual studies analyzing a relationship between pro-environmental behavior and eco-friendly channels (e.g., local food market and farmers' market channel) usage behavior (visit and purchasing frequency) are rare. This study investigated the relationship between consumers with positive pro-environmental behavior and eco-friendly channels usage behavior. Research design, data and methodology: The study investigated the relationship between pro-environmental behavior and eco-friendly channels (local food markets and farmers market) visit behavior by analyzing data from the Korea Consumer Agency's 2021 Korea Consumption Life Index, with a focus on the pro-environmental index. Relationship between pro-environmental behavior and whether eco-friendly channels visit or not were analyzed. Demographic variables also influence eco-friendly oriented channels visit. Data analysis used hierarchical regression, firstly inputted pro-environmental behavior, and then demographic variables inputted, and finally pro-environmental behavior and demographics interactions as moderating variables inputted. Results: Consumer's with positive behavior towards pro-environment were indeed more likely to choose local food market and farmers' market compared to other consumers. Demographic variables also effect local food market visit. Some demographic variables moderate this relationship. The results, however, differed by channel type. Conclusions: Pro-environmental behavior is closely related to eco-friendly channels (local food market and farmers; market) visit.

• Korean Journal of Metals and Materials
• /
• v.49 no.2
• /
• pp.128-136
• /
• 2011

Equal channel angular pressing (ECAP) with intermediate heat treatment was employed to optimize the strength of Cu-15 wt.%Ag. Changes in microstructure, electrical properties and mechanical properties were studied as a function of pressing methods and heat treatment. ECAPed Cu-15wt.%Ag exhibited ultrafine-grained microstructures with the shape and distribution of Ag-rich lamellae dependent on the processing routes. For route A in which the sample was pressed without rotation between each pass, the initial dendrites of Ag-rich phase were elongated along the shear direction and developed into elongated filaments. For route C in which the sample was rotated by 180 degree after each pass, the morphology of initial dendrites of Ag-rich phase was not much modified and the networked structure remained even after 8 passes of ECAP. For route Bc in which the sample was rotated by 90 degree after each pass, the initial dendrites became finer by fragmentation with no pronounced change of the shape and distribution of Ag-rich lamellae. The strength of Cu-15wt.%Ag ECAPed using route Bc was found to be greater than those ECAPed using route A, suggesting that the substructural strengthening is more effective in strengthening than the interface strengthening.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.4
• /
• pp.44-52
• /
• 2024

This study attempts to derive measures to improve content claims of free antibiotic livestock products(FLP) through analyzing situations for the FLP market and results of survey for its providers. Recently the number of certified farms has been decreasing, but shipments per farm has been increasing. Furthermore as the COVID-19 has increased health and environmental concern, shipments of FLP have showed a steady increase. The distribution channel of FLP, regardless of varieties, is similar to that of general livestock products(GLP). The major results from survey for providers of FLP are little difference in between content claims of GLP and FLP and low utilization of FLP in production of livestock processed products compared with its shipments. The policies for content claims of FLP suggested by this study are permission of FLP authentication labelling for livestock processed products and permission of those which contain FLP over 70% in the first step.