• Journal of Korean Society of Forest Science
• /
• v.81 no.3
• /
• pp.263-272
• /
• 1992

In a torrential river, the flow of debris forms deposits in the river bed, which show the characteristics of the channel bed movement in the watershed. The annual rings of the trees, in the natural evenaged forests on the deposits, indicate when each deposit occurred. Based on the topographical and vegetational indicators on the sediment of Yongcheon and Yeounae rivers, the movement occurrence years were estimated. 1. The cross sectional shapes of deposits in torrential river are in tiers and even-aged forests tend to establish on each tier. 2. Generally the older the forest age is, the higher the height of step from the lowest base tend to become, which indicates discrete movement in magnitude and frequency. 3. The ages of trees indicate the year when deposition occurred, and so may be useful as plant indicator to get spatial-temporal information of deposits. 4. The deposits volumes(F. V.) were dependent on the age distribution of deposits in length, average width and average height. And the average width and the average height of deposits were increasing with the age.

• 한국해양학회지
• /
• v.25 no.2
• /
• pp.62-73
• /
• 1990

An experimental study is performed in order to catch the characteristics of the flow field at arrested salt wedge, using a rectangular open channel. Arrested salt wedge is generally so stable that the observations are easy, but velocities and interfacial waves are measured with the aid of visualization method, by injection of fluorescent dyes. The density interface, which is defined as the zone of maximum density variation with depth, exists in about 0.5 cm below the visual interface, and vertical density profile is quite well satisfied with Homeborn model. Interfacial layer has high turbulent intensity and its thickness decreases as the overall Richardson number increases and has magnitude of roughly 17% of upper layer. Cross-sectional velocity distribution just shows the influence of a side-wall friction and in the upper layer vertical velocity profile also becomes uniformly as Reynolds number increases, but in the lower layer it shows nearly parabolic type. Supposes that we divide salt wedge into three domains, that is, river mouth, intermediate and tip zone, entertainment coefficient is small at the intermediate zone and large at the river mouth and the tip zone. River mouth or intermediate zone has comparatively stable interface and capillary wave therefore s produced and propagated downstream. On the other hand, tip zone is very unstable, cusping ripple or bursting ripple is then produced incessantly. Arrested salt wedge form is nearly linear and has no relation to densimetric Froude number and Reynolds number.

• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.535-546
• /
• 2010

Purpose: The subcutaneous fat tissue is separated into 2 layers by the subcutaneous fascia: the superficial and deep fat layers. The two fat layers have different structures according to the body regions. The purpose of this study is to evaluate the distribution and pattern of the two fat layers in the human body by computed tomography (CT) and histological analysis according to age, sex, anatomical region, and body mass index (BMI). Methods: This study included 200 males and 200 females who underwent 64-channel dynamic CT in our hospital. The patients were divided into 5 groups according to 10 years of their ages separately in either male or female gender. The thickness of the superficial and deep fat layers was measured in the abdominal, pelvic, and femoral regions, and we analyzed the values. Statistical analyses were performed using SPSS software. The $3{\times}3$-cm whole fat layers were harvested from the same sites of 3 cadavers for histological examination, and one cadaver was dissected for gross evaluation. Results: The total thickness of subcutaneous fat tissue was greater in females than in males, and the ratio of the superficial fat layer to the whole fat layer was higher in females. The superficial fat layer became thinner with increasing age in males. As BMI increased, the total fat layer became thicker, and the superficial fat layer became thicker than the deep fat layer. On histological examination, the superficial fat layer had small adipose lobules and showed a densely distributed pattern in the abdominal region, whereas in the femoral region, it had large adipose lobules and showed a sparsely distributed pattern. There were no significant differences in the histological findings of the deep fat layer between the 3 body regions. Conclusion: Significant differences in histological findings of the two fat layers were found in relation to age, sex, anatomical region, and BMI. The superficial fat layer became thinner with increasing age in males, but it was constant in females. As BMI increased, the total thickness of subcutaneous fat tissue became greater, and the superficial fat layer became thicker than the deep fat layer. Our measurements can be used to understand the characteristics of the fat layers in relation to age, sex, anatomical region, and BMI.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1017-1021
• /
• 2006

인공순환수로에 정육면체 수리구조물을 구간별로 설치하여 흐름특성에 따른 깔따구의 서식경향을 조사하였다. 정밀한 흐름특성을 분석하기 위하여 난류계산을 수행하였으며, 인공순환수로에 깔따구를 투입하고 3일경과 후 깔따구의 개체수를 조사하였다. 인공순환수로는 단면 폭 29cm, 높이 30cm인 구조로 제작되었으며 직선구간의 길이는 120cm이다. 인공순환수로의 직선구간에 길이 10cm의 정육면체 수리구조물을 20cm 간격으로 양쪽 벽면부에 4개씩 균일하게 설치하였다. 자연하천에서 채집된 원수를 수심 20cm가 되도록 투입한 후 유기물을 하상에 고르게 깔고, 회전날개를 이용하여 평균유속 10cm/s로 안정화 시킨 후 깔따구 투입하였다. 실험시작 3일 경과 후, 깔따구의 서식경향을 조사한 결과 깔따구는 수리구조물 직하류부에 주로 서식하였다. 이는 주 흐름방향 유속분포가 수리구조물 후방에서 급격히 작아져 깔따구들이 정착하기 좋은 환경을 제공하기 때문인 것으로 판단된다. 또한 인공순환수로 직선구간의 안쪽 벽면과 바깥쪽 벽면의 깔따구 개체수는 안쪽 벽면이 바깥쪽 벽면에 비하여 2배 정도 많다. 이는 수리구조물 사이 안쪽 벽면 하상의 시계방향 회전흐름 때문으로 분석되며 상대적으로 이러한 흐름은 바깥쪽 벽면에서 작다. 실험 및 수치해석 결과, 깔따구는 상대적으로 유속이 작은 곳에 서식하며, 이차류의 경향에 따라 서식처를 이동하는 것으로 분석되었다. 향후 생태적 기능을 고려하여 다양한 수리학적 조건 하에서 난류계산 및 유속측정을 통한 연구가 필요하다. 이와 같은 연구는 친환경적으로 하천을 복원시키는데 유용한 자료를 제공할 수 있을 것으로 생각된다.은 silt나 clay보다 입경이 큰 모래나 자갈을 경유 하면서 오염물의 저감효과가 감소한 것으로 판단된다. 그러나 유입유량의 대부분이 표면으로 유출된다는 점을 고려할 때 표면유출수의 오염도를 낮추는 것이 유입오염물 저감효과에 보다 큰 효과가 있을 것으로 판단된다.문에 자료의 이상적 유지 관리가 이루어지며 복잡한 2차원 수질해석 모형을 수월하게 운영할 수 있는 시스템으로 개발하였다.제외하면, 부자측정 방법에 의한 유량산정시 가장 큰 오차원인은 홍수시 측정된 유속측선의 위치와 홍수 전후로 측정된 횡단면상의 위치가 일치하지 않는 점과, 대부분 두 측정 구간의 평균값을 대푯값으로 사용한다는 점이다. 본 연구는 다년간의 유량 측정 및 검증 경험과 자료를 토대로 현장에서 부자를 이용하여 측정된 측정성과를 정확도 높은 유량자료로 산정하는데 있어서의 문제점을 도출하고, 이로 인해 발생하는 오차를 추정하여 그 개선방안을 제시해 보고자한다. 더불어 보다 정확한 유량 산정을 위한 기준과 범주를 제시하고자 한다.리적 특성을 잘 반영하며, 도시지역의 복잡한 배수시스템 해석모형과 지표범람 모형을 통합한 모형 개발로 인해 더욱 정교한 도시지역에서의 홍수 범람 해석을 실시할 수 있을 것으로 판단된다. 본 모형의 개발로 침수상황의 시간별 진행과정을 분석함으로써 도시홍수에 대한 침수위험 지점 파악 및 주민대피지도 구축 등에 활용될 수 있을 것으로 판단된다. 있을 것으로 판단되었다.4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게

• Journal of Korea Water Resources Association
• /
• v.49 no.12
• /
• pp.1035-1044
• /
• 2016

In joint portions of the levee and the barrier, complex 3-dimensional flow was generated and collapse of revetment occurred frequently. For these reasons, it is necessary to install the joint revetment with greater stability as compared with the general revetment at the joint portions. However, design criteria for joint revetment was not presented in River Design Criteria (KWRA, 2009). Therefore it is necessary to research for engineering design of the joint revetment. In this study, hydraulic experiments were performed under various flow conditions in order to realize the collapse conditions of riprap and carried out in 20.0 m straight open channel with one side levee and the width was 4.0 m. The diameter of riprap covered around joint revetment was 0.03 m and the inlet discharges were $0.5{\sim}0.8m^3/s$. The numerical simulations were performed under same conditions with experiment. as results of this numerical simulations, the influence range was confirmed from the distribution of flow characteristics and shear stress. As a result, the riprap diameter of the joint revetment was calculated from 4.1 to 6.9 times greater than that of general revetment. As the inlet discharge was large, the range of vulnerable area was developed long in the downstream direction despite of same withdrawal velocity of riprap. Through this study, the methods of calculating the riprap diameter and influence range were proposed according to hydraulic characteristics of flow around joint revetment. At a later study, if additional experiments about effect of flood plane and various types of barrier is applied, it is expected that rational design method with stability of joint revetment can be proposed.

• Journal of the Korean earth science society
• /
• v.35 no.1
• /
• pp.29-40
• /
• 2014

A DC resistivity survey was performed to detect anomalies beneath concrete pavement. A set of high conductive media and planar electrodes were used to lessen the effect's a high contact resistance of concrete. Results of the resistivity survey were analyzed and compared with those of other geophysical surveys such as Ground Penetration Radar (GPR), Impulse Response (IR), and Multi-channel Analysis of Surface Waves (MASW), which were carried out in the same location. The results of resistivity survey showed a high resistive distribution in the section of sink and pavement where a pattern of reinforcement was observed through the GPR survey. Also, a comparison of results between the IR and resistivity surveys indicated that the high resistivity was produced by the high dynamic stiffness in the reinforced section. The co-Kriging of both the results of DC resistivity and MASW surveys at the same location showed that an integrated geostatistical analysis is able to give more accurate description on the anomalous subsurface region than can a separate analysis of each geophysical approach. This study suggests that the integrated geostatistical approaches were used for a decision-making process based on the geophysical surveys.

• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.270-283
• /
• 2012

With the advent of multi-channel TV, IPTV and smart TV services, excessive amounts of TV program contents become available at users' sides, which makes it very difficult for TV viewers to easily find and consume their preferred TV programs. Therefore, the service of automatic TV recommendation is an important issue for TV users for future intelligent TV services, which allows to improve access to their preferred TV contents. In this paper, we present a recommendation model based on statistical machine learning using a collaborative filtering concept by taking in account both public and personal preferences on TV program contents. For this, users' preference on TV programs is modeled as a latent topic variable using LDA (Latent Dirichlet Allocation) which is recently applied in various application domains. To apply LDA for TV recommendation appropriately, TV viewers's interested topics is regarded as latent topics in LDA, and asymmetric Dirichlet distribution is applied on the LDA which can reveal the diversity of the TV viewers' interests on topics based on the analysis of the real TV usage history data. The experimental results show that the proposed LDA based TV recommendation method yields average 66.5% with top 5 ranked TV programs in weekly recommendation, average 77.9% precision in bimonthly recommendation with top 5 ranked TV programs for the TV usage history data of similar taste user groups.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.575-583
• /
• 2017

Various types of flow patterns around the stepped weir and spillway, such as the skimming flow over such structures and the wave-type flow with a standing undular hydraulic jump and roller downstream of the structures, are developed in open channels. Unsteady three-dimensional numerical simulations are carried out using a hybrid RANS-LES turbulence modeling approach and the volume of fluid method for resolving free surface fluctuations to represent the turbulent flow including the skimming flow and wave-type flow over a stepped weir installed in a rectangular channel. The comparison of numerical results with an existing experimental measurement reveals that the present numerical simulations reasonably well reproduce the turbulent flow passing the stepped weir, in terms of time-averaged velocity profiles at selected locations downstream of the weir, flow topology characterized by the wave-type and skimming flows, the maximum height and length of the standing wave and the length of reattachment of recirculating zone. The numerical result further elucidates the distinct flow behaviors of the wave-type and skimming flow by presenting instantaneous intense variations of free surface and velocity vectors, the distributions of Reynolds shear stress and turbulent kinetic energy and three-dimensional complex features of coherent structures and total pressure distribution.

• Analytical Science and Technology
• /
• v.26 no.4
• /
• pp.262-267
• /
• 2013

Gravitational field-flow fractionation (GrFFF) is a separation technique that utilizes earth's gravity as the external field. GrFFF is a convenient tool for the size and/or density-based separation of micron-sized particles of various origins. In this study, GrFFF was employed for size-based separation of oyster mushroom spores. Oyster mushroom spores have smooth surface and are of cylindrical to narrow kidney-shapes with 5 to 12 im in longer dimension and 3 to 4 im in shorter dimension, as was confirmed by optical microscope (OM). GrFFF conditions were optimized for separation and characterization of spores by varying the channel flow rate from 0.5 to 1 mL/min. During the GrFFF elution of the spores, 3 fractions were collected to confirm the growth of oyster mushroom spore. The collected fractions were incubated for 30 days in water to examine the influence of the size on the growth of the spores. Results suggested that the oyster mushroom spores collected at the middle part of the GrFFF fractogram grew faster than those collected at the beginning or at the end of the fractogram.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.2
• /
• pp.166-174
• /
• 1987

Distribution, bathymetry and textural parameters of the bottom sediment deposited between Geoje and Namhae Islands were studied to understand the depositional environment of the area. The study area is divided into three different provinces. Except for the Gwangyang Bay and Changseon Channel, mud dominates in the western part whereas sandy mud and muddy sand prevail in the southeastern part including the eastern area of the Yogji Island. The relict sediment is located in the eastern part of the area. Generally, the Holocene sediment, located in the northern part of the area, is considered to be transported and deposited by a pelagic suspension mode. Influence of strong tidal currents results in some depressions in the vicinity of Changseon Island and the eastern part of the Yogji Island, The Tsushima Warm Current is supposed to affect the southern part of the area. The two parallels sand ridges lying in the southeastern part of the area are covered with very thin Holocene mud. This seems to be caused by the winnowing effect of the current. The similarity between the two directions of the current and the ridges encourages this idea. The boundary between the Holocene and relict sediment, however, lies further south the ridges.