• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.771-779
• /
• 1989

Numerical analysis by SIMPLE algorithm has been performed to predict the characteristics of flow and heat transfer in channels between the printed circuit boards of an electronic cabinet. It is assumed that the electronic parts release uniform heat flux per unit axial length to the cooling air. The air flow between channels is assumed fully developed laminar, incompressible, and mixed convective. In this study, the electronic parts are mounted on both sides of the prinked circuit boards by two kinds of configuration such as the zig-zag and the symmetric one. The Rayleigh numbers ranging from 0 to 10$^{6}$ are considered to predict the characteristics of the main flow and the secondary flow occurred by natural convection, the temperature distribution in channel, the heat transfer rate from heated electronic parts and the increase of friction factor by natural convection. As the results of numerical calculation, several conclusions are drawn as follows. The influence of natural convection on the flow characteristics appears strong when the Rayleigh number is above 10$^{4}$. The main axial flow rate decreases by a half or more at the Rayleigh number of 10$^{6}$ . Although the friction factor increases as Rayleigh number increases, the increasing rate of heat transfer is higher than that of the friction factor. The cooling efficiency of the zig-zig-configuration is superior to that of the symmetric configuration at same Rayleigh number.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.4
• /
• pp.257-268
• /
• 2017

This paper proposes an efficient two-dimensional simulation model for solid oxide fuel cells (SOFCs) based on the electrochemical effectiveness model. The effectiveness model is known to accurately predict the current generation performance of SOFC electrodes, by considering the complex reaction/transport processes that occur within thin active functional layers near the electrolyte. After validation tests, the two-dimensional simulation model was used to calculate the distribution of current density and oxygen concentration transverse to the flow channel in anode-supported SOFCs, with which the oxygen depletion characteristics were investigated in detail. In addition, simulations were also conducted to determine the minimum number of grids required in the transverse direction to efficiently obtain accurate results.

• The Korean Journal of Physiology and Pharmacology
• /
• v.5 no.1
• /
• pp.1-8
• /
• 2001

Hyperpolarization of arterial smooth muscle by acetylcholine is considered to be produced by the release of an unidentified chemical substance, an endothelium-derived hyperpolarizing factor (EDHF). Several chemicals have been proposed as the candidate for EDHF. However, none of them fulfil completely the nature and property of EDHF. Ultrastructural observation with electron microscope reveals that in some arteries, gap junctions are formed between endothelial and smooth muscle cells. In small arterioles, injection of gap junction permeable dyes into an endothelial cell results in a distribution of the dye to surrounding cells including smooth muscle cells. These observations allow the speculation that myoendothelial gap junctions may have a functional significance. Simultaneous measurement of the electrical responses in both endothelial and smooth muscle cells using the double patch clamp method demonstrates that these two cell types are indeed electrically coupled, indicating that they behave as a functional syncytium. The EDHF-induced hyperpolarization is produced by an activation of $Ca^{2+}-sensitive\;K^+-channels$ that are inhibited by charybdotoxin and apamin. Agonists that release EDHF increase $[Ca^{2+}]_i$ in endothelial cells but not in smooth muscle cells. Inhibition of gap junctions with chemical agents abolishes the agonist-induced hyperpolarization in smooth muscle cells but not in endothelial cells. All these observations can be explained if EDHF is an electrotonic signal propagating from endothelium to smooth muscle cells through gap junctions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.661-667
• /
• 2001

This paper proposes a Truncated Type-II Hybrid ARQ scheme using an adaptive modulation system to achieve high throughput data transmission systems for DS-CDMA cellular mobile communication systems. In this paper, the adaptive modulation system analyzed in Nakagami (m-distribution) fading channel environment. The adaptive modulation system controls the modulation level and symbol rate according to the Nakagami fading parameter( m). When the received Eb/No is high or the Nakagami fading parameter m is high, the propose system selects higher modulation level and higher symbol rate to increase throughput. On the other hand, this system selects lower modulation level and lower symbol rate to prevent throughput performance degradation when the received Eb/No is low. The modulation method have been adopted QPSK 16QAM, 64QAM, 256QAM. Therefore, adaptive modulation systems with Truncated Type II Hybrid ARQ Scheme is proper for mobile and radio data communication system that require high reliability and delay-limited applications.

• Nuclear Engineering and Technology
• /
• v.52 no.1
• /
• pp.19-26
• /
• 2020

Small nuclear reactor features higher power capacity, longer operation life than conventional power sources. It could be an ideal alternative of existing power source applied for special equipment for terrestrial or underwater missions. In this paper, a 25kWe heat pipe cooled reactor power source applied for multiple use is preliminary designed. Based on the design, a thermal-hydraulic analysis code for heat pipe cooled reactor is developed to analyze steady and transient performance of the designed nuclear reactor. For reactor design, UN fuel with 65% enrichment and potassium heat pipes are adopted in the reactor core. Tungsten and LiH are adopted as radiation shield on both sides of the reactor core. The reactor is controlled by 6 control drums with B₄C neutron absorbers. Thermoelectric generator (TEG) converts fission heat into electricity. Cooling water removes waste heat out of the reactor. The thermal-hydraulic characteristics of heat pipes are simulated using thermal resistance network method. Thermal parameters of steady and transient conditions, such as the temperature distribution of every key components are obtained. Then the postulated reactor accidents for heat pipe cooled reactor, including power variation, single heat pipe failure and cooling channel blockage, are analyzed and evaluated. Results show that all the designed parameters satisfy the safety requirements. This work could provide reference to the design and application of the heat pipe cooled nuclear power source.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.614-614
• /
• 2012

개수로에서 혹은 수리구조물 주변에서의 흐름 및 난류 특성을 파악하기 위해서는 연직유속분포 및 수심별 평면유속분포의 측정이 필요하다. 유속분포를 측정하기 위한 방법은 음파 도플러 유속계(ADV:Acoustic Doppler Velocimetry)를 사용하는 방법과 PIV 기법을 이용하는 방법이 있다. 일반적으로 ADV는 한 지점의 유속을 시간변화에 따라 연속적으로 측정할 수 있어 난류특성의 정량적인 해석에 장점이 있으나 동시간에 여러 지점을 측정할 수 없기 때문에 난류의 공간적인 문제를 해석함에 있어서 한계가 있다. 그러나, 입자영상유속계(PIV:Particle Image Velocity)는 측정하고자 하는 단면에서 연직 횡단면의 유속분포 및 수심별 평면 유속분포 흐름장 측정이 가능하여 난류흐름의 공간적인 문제를 해석하는데 효과적일 뿐만 아니라 영상간의 시간간격을 짧게 하고, 촬영시간을 충분히 길게 한다면 개수로 내 난류특성 분석도 가능하다. 이에 본 연구의 목적은 PIV 기법을 이용하여 매끄러운 하상의 개수로에서 연직유속분포를 측정하고 그 특성을 정량적으로 분석하고자 한다. 본 연구에서는 첫째, PIV 기법을 이용하여 측정한 연직유속분포와 3차원 전자식 유속계를 이용하여 측정한 연직유속분포를 비교 분석하였다. 둘째, 후류법칙에 의해 계산된 연직유속분포와 PIV 기법을 이용하여 측정한 연직유속분포의 비교를 위해 각각의 무차원 유속분포(지점 유속/지점 마찰속도)를 계산하고 비교하였다. 마지막으로 각 흐름 조건에 따라 수심의 변화를 주어 연직유속분포를 PIV 기법으로 측정한 후 개수로의 수심변화에 따른 연직유속의 특성을 분석하였다. 분석 결과, PIV 기법을 이용하여 측정한 연직유속 성분에 비해 3차원 전자식 유속계로 측정한 연직유속 성분이 작게 나타났고 바닥에서부터 0.2h 지점까지는 무차원 유속분포(지점 유속/지점 마찰속도)가 후류법칙과 잘 맞는 경향을 보였으나 0.2h 지점부터 수표면까지는 유속이 감소하는 현상이 나타났다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.5 s.248
• /
• pp.405-412
• /
• 2006

In order to realize a stably propagating flame in a narrow channel, flame instabilities resulting from flame-wall interaction should be avoided. In particular flame quenching is a significant issue in micro combustion devices; quenching is caused either by excessive heat loss or by active radical adsorptions at the wall. In this paper, the relative significance of thermal and chemical effects on flame quenching is examined by means of quenching distance measurement. Emphasis is placed on the effects of surface defect density on flame quenching. To investigate chemical quenching phenomenon, thermally grown silicon oxide plates with well-defined defect distribution were prepared. ion implantation technique was used to control defect density, i.e. the number of oxygen vacancies. It has been found that when the surface temperature is under $300^{\circ}C$, the quenching distance is decreased on account of reduced heat loss; as the surface temperature is increased over $300^{\circ}C$, however, quenching distance is increased despite reduced heat loss effect. Such abberant behavior is caused by heterogeneous surface reactions between active radicals and surface defects. The higher defect density, the larger quenching distance. This result means that chemical quenching is governed by radical adsorption that can be parameterized by oxygen vacancy density on the surface.

• Journal of Marine Bioscience and Biotechnology
• /
• v.5 no.4
• /
• pp.40-45
• /
• 2011

Microalgae are one of the major, sustaining components of ecosystem processes and are responsible for biogeochemical reactions that drive our climate changes. Despite this, many marine microalgae are poorly described and little is known of their abundance and distribution along the coastal areas of Sooyoung Bay, Busan, South Korea. The present study has been conducted from November, 2011 to August, 2009 with the objective to provide an overview of the taxonomy diversity and abundance of microalgae along the coastal areas of the Sooyoung Bay. Water samples were collected from different sites, which were located by using a GPS tracker. Chlorophyll fluorescence of the water samples were measured by using ToxY-PAM dual-channel yield analyzer. The chlorophyll fluorescence values were relatively higher during the spring and summer and even in the region near to the sea port. Similarly the abundance of microalgae was higher near the port but diversity index had lower values. The temperature and pH values were same at all the sites. However, only the temperature varied during the sampling period, with higher values during summer and lower in winter. From the preliminary results, the following class of microalgae were found; Bacillariophyceae, Dinophyceae, Silicoflagellate and Cryptophyceae. With a future ongoing work, microalgae are being isolated to establish single cell culture and for identification using light microscopic observations, photography and molecular approaches.

• Ocean Science Journal
• /
• v.40 no.4
• /
• pp.191-200
• /
• 2005

In this study an analytical tide model of uniform width with three sub-regions is presented. The three-subregions model takes into account step-like variations in depths in the direction of the channel as a way to examine the $M_2$ tide of the East China Sea (ECS) as well as the Yellow Sea (YS). A modified Proudman radiation condition has been applied at the northern open head, while the sea surface elevation is specified at the southern open boundary. It is seen that, due to the presence of an abrupt change in depth, co-amplitude lines of the $M_2$ tide are splitted to the east and west near the end of the ECS shelf region. Variations in depths, bottom friction and the open head boundary conditions all contribute to the determination of formation of amphidromes as well as overall patterns of $M_2$ tidal distribution. It is seen that increasing water depth and bottom friction in the ECS shelf results in the westward shift of the southern amphidrome. There is however no hint at all of the well-known degenerated tidal pattern being formed. It is inferred that a lateral variation of water depth has to be somehow incorporated to represent the tidal patterns in ECS in a realistic manner. Regarding the radiation factor introduced by Fang et al. (1991), use of a value larger than one, possibly with a phase shift, appears to be a proper way of incorporating the reflected waves from the northern Yellow Sea (NYS).

• 한국해양학회지
• /
• v.24 no.4
• /
• pp.172-183
• /
• 1989

Acoustical estimation of vertical distributions of zooplankton was carried out by using the backscattered signals of ADCP which was deployed in the Korea Strait in September, 1978. the backscattered signals of ADCP represents the total backward sound intensity caused by the scatters existing within the insonified water column of 8m deep. Based on these backscattered intensities, the estimated number of individual zooplankton (namely, Copepods) varies with depth such that in the surface layer above the thermocline, the numbers are exceedingly larger than the lower layer. It is also shown that a relatively larger number of individuals exists in the bottom cold water layer in the centeral part of the Strait. The horizontal distribution of the zooplankton in the surface layer across the west channel of the Strait shows that the number is higher in the coastal zone of the Korea and it decreases toward the central and then remains constant up to the vicinity of the Tsushima Island where it increases again. This type of distributions is well fitted to the one obtained at several stations by the conventional method at least in qualitative way. Therefore, it is quite plausible to use the ADCP data for monitoring the spatial and temporal distributions of zooplankton.