• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.729-732
• /
• 2002

This paper reports an experimental study around a module about forced air flow by blower($35{\times}35{\times}6mm^3$) in portable PC(10mm high, 200mm wide, and 235mm long). The channel inlet flow velocity has been varied between 0.26, 0.52 and 0.78m/s. The power input to the module is 4Wthis report, particular attention is directed to the fluid flow and adiabatic wall temperature($T_(ad)$) around a module which is under fluid mechanical and thermal influences of the module. The fluid flow around a module was visualized using PIV system. Liquid crystal thernography is used to determine the adiabatic wall temperature around a heated module on an acrylic board. Plots of $T_(ad)$ (or F) show marked effects of dispersion of thermal wake near the module.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.557-560
• /
• 2002

In this study, simulation of weak shock waves are peformed by a two-dimensional thermal fluid or compressible fluid model of the lattice Boltzmann method. The shock wave represents an abrupt change in fluids properties, in which finite variations in pressure, internal energies, and density occur over the shock thickness. The characteristics of the proposed model with a simple distribution function is verified by calculation of the sound speeds, and the shock tube problem. The reflection of a weak shock wave by wedge propagating in a channel is performed. The results agree well with those by finite difference method or by experiment. In the simulation of unsteady shock wave diffraction around a sharp corner, we show a flow field of vortical structure near the comer.

• Journal of the Korean Society for Library and Information Science
• /
• v.39 no.4
• /
• pp.139-161
• /
• 2005

This study aims to suggest a strategic alliance between libraries and publishers in Korea. When it considers the linear distribution channel of current publications and the entity and a butterfly effect of knowledge communication crisis, the publishers as production agency and the library as consuming subject must search a strategic cooperative plans. In order to achieve this goal, the study analysed the four issues(fixed book prices, library infrastructure, book and library supply policy of government, legal deposit system) which is important.

• Journal of the Korean Society of Visualization
• /
• v.6 no.2
• /
• pp.28-32
• /
• 2008

Contrary to the flow rate in fully filled pipe flows, the flow rate in partially filled pipe flows is significantly influenced by the variation of water level, channel slop, and so on. The major difference in these two flows results from the existence of a free surface. To make it clear, in the present study, a similarity of the velocity profile in a partially filled circular pipe has been investigated according to the water level. A particle image velocimetry (PIV) technique was applied to measure the three-dimensional velocity profiles. As a result, there is found a similarity of the velocity profile near the central region. However, near the side wall, the similarity is broken due to the interaction between the wall and the free surface.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.6
• /
• pp.379-383
• /
• 2003

The subthreshold characteristics of Double-Gate MOSFETs are analyzed for various Tsi. In the lightly-doped asymmetric device, it is found that the subthreshold current dramatically increases as the Tsi increases and this phenomenon is due to the linear distribution of potential in the channel region with low depletion-charge. Further, we derived an analytical equation which can explain this phenomenon and verified the accuracy of analytical equation by comparing with the result of device simulation.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.6
• /
• pp.345-352
• /
• 2015

Recently, by developing many training systems in battle field, the demand for interconnecting and internetworking between Live, Virtual, Constructive training systems has been increased to support efficient data distribution and system control. But, there are lots of problems for them to interwork, because the existing researches only support L-L, V-V, C-C Interoperability. Therefore, we propose L-V-C gateway to provide interoperable simulation environment based on HLA and DDS between them. First, we illustrate FOM Management that parses RPR-FOM XML file to acquire Data information to be shared between them, and generates common data structure and source code used for L-V-C Gateway. L-V-C Gateway created from FOM Management supports Data Conversion and Quality of Service between HLA and DDS. HLA Federate and DDS Domainparticipant in L-V-C Gateway play a role of logical communication channel and relay data from HLA Federation to DDS Domain and vice versa.

• Journal of Environmental Science International
• /
• v.9 no.3
• /
• pp.193-199
• /
• 2000

This study is carried out the analysis of the runoff characteristics for the design of the interior drainage systems by SWMM in urbanization basin. The basin analyzed in this study is Bumuh-chun basin which is located in Susung-gu of Taegu city. Huff method is used for rainfall distribution analysis. The optimal rainfall duration in Bumuh-chun basin is analyzed as about 90 minutes decided from comparison of arrival time and critical duration. Flood flow variation pattern is proposed through the comparison of the results of peak flow and peak time analyzed by SWMM about pre-urbanization and post-urbanization of Bumuh-chun basin. It is known that the variation of arrival time caused by the rapid increase of pavement rate in the upper area shows about 20∼25 minutes faster than pre- urbanization. Therefore, the management of surface water for design of water supply and drainage, and channel alteration has to considered the variation of geological factors according to urbanization.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.11a
• /
• pp.14-17
• /
• 1992

To analyze Nonvolatile SNOSFET(polySilicon-Nitride-Oxide-Semiconductor Field Effect Transistor) memory device, two dimensional numerical computer simulation program was developed. The equation discretization was performed by the Finite difference method and the solution was derived by the Iteration method. The doping profile of n-channel device which was fabricated by 1Mbit CMOS process was observed. The electrical potential and the carrier concentration distribution to applied bias condition were observed in the inner of a device. As a result of the write and the erase to memory charge quantity, the threshold voltage shift is expected. Therefore, without device fabrication, the operating characteristics of the device was observed under various the processing and the operating condition.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.312-315
• /
• 2008

The flow structure behind circular and elliptical type rings embedded in a cross-flow was investigated experimentally using two-frame particle image velocimetry (PIV). The experiments were performed in a circulating water channel with a test section of 0.35m height ${\times}$ 0.3m width ${\times}$ 1.1m length. PIV measurements were carried out with varying the Reynolds number in the range of 4.5 ${\times}$ $10^2$ - 4.5 ${\times}$ $10^3$. In the present study, turbulent flow structures in the stream-wise direction and span-wise direction were investigated. The mean velocity field distribution was obtained by statistical-averaging instantaneous velocity fields. The spatial distributions of turbulent statistics such as turbulent intensities and turbulent kinetic energy were also investigated.

• Journal of Mechanical Science and Technology
• /
• v.18 no.10
• /
• pp.1849-1858
• /
• 2004

For examining friction-factor characteristics of round-hole pattern surfaces which are usually applied on damper seals, flat plate test apparatus is designed and fabricated. The measurement method of leakage and pressure distribution along round-hole pattern specimen with different hole area is described and a method for determining the Fanning friction factor is discussed. Results show that the round-hole pattern surfaces provide a much larger friction factor than smooth surface, and the friction factor vs. clearance behavior yields that the friction factor generally decreases as the clearance increases unlike the results of Nava's flat plate test. As the hole depth is decreased, the friction factor is increased, and maximum friction factor is obtained for 50% of hole area. Since the present experimental friction factor results show coincident characteristics with Moody's friction factor model, empirical friction factors for round-hole pattern surfaces are obtained by using the Moody's formula based on curve-fit of the experimental data. Results of Villasmil's 2D CFD simulation support the present experimental test result.