• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.78-84
• /
• 2017

Compared to other types of power, hydraulic energy is the most commonly used for heavy vehicles and ships because it has fewer location and space constraints, and its controllability can be maintained even under adverse conditions. Operators have controlled a main control valve of ship winches by pushing or pulling the lever, which is directly connected to the spool. However, because of the spatial arrangement, the importance of remote control valves has emerged. In this paper, experiments of the hysteresis characteristics were performed by analyzing the remote-control valve using a valve tester and RA2300. The validity was verified by comparing with the analytical model using SimulationX as the hydraulic analysis program. This study examined the effects of the spool's notch (Non, End-mill, and Spherical) and the effects of stiffness and pre-load of the spool spring on Spool stroke, open area, and hysteresis characteristics. It is considered possible to reduce the cost and the, trial and error process in designing remote-control valves in the future.

• 한국지리정보학회지
• /
• 제16권2호
• /
• pp.16-29
• /
• 2013

본 연구는 경상남도 창원시를 대상으로 MetPhoMod 모델링의 야간시간대 바람패턴결과를 이용하여 공기순환성 평가를 실시하였다. 공기순환성 평가는 바람의 지속성과 교란성의 평가지수를 이용하여 분석하였으며, 바람의 지속성은 바람패턴의 풍속, 바람의 교란성은 풍향의 다양성 결과를 활용하였다. 분석결과 도시지역 중 공기순환성이 취약한 지역은 봉림동, 용지동, 반송동 등으로 나타났으며, 특히 용지동과 상남동, 사파동의 고층아파트 및 상업지역, 단독주거지역에서 바람정체현상이 발생하는 것으로 확인되었다. 따라서 이러한 공기순환성이 취약하여 바람정체현상이 발생하는 지역에 대해 공간개선을 함으로써 바람의 유동이 원활할 수 있도록 조성되어야 할 것이며, 도시외곽에서 생성되는 바람이 지속적으로 유입될 수 있도록 개발계획차원에서 바람길 조성방안이 마련되어야 할 것으로 판단된다.

• 한국재료학회지
• /
• 제30권12호
• /
• pp.678-686
• /
• 2020

Microstructural characteristics of directionally solidified René 80 superalloy are investigated with optical microscope and scanning electron microscope; solidification velocity is found to change from 25 to 200 μm/s under the condition of constant thermal gradient (G) and constant alloy composition (Co). Based on differential scanning calorimetry (DSC) measurement, γ phase (1,322 ℃), MC carbide (1,278 ℃), γ/γ' eutectic phase (1,202 ℃), and γ' precipitate (1,136 ℃) are formed sequentially during cooling process. The size of the MC carbide and γ/γ' eutectic phases gradually decrease with increasing solidification velocity, whereas the area fractions of MC carbide and γ/γ' eutectic phase are nearly constant as a function of solidification velocity. It is estimated that the area fractions of MC carbide and γ/γ' eutectic phase are determined not by the solidification velocity but by the alloy composition. Microstructural characteristics of René 80 superalloy after solid solution heat-treatment and primary aging heat-treatment are such that the size and the area fraction of γ' precipitate are nearly constant with solidification velocity and the area fraction of γ/γ' eutectic phase decreases from 1.7 % to 0.955 %, which is also constant regardless of the solidification velocity. However, the size of carbide solely decreases with increasing solidification velocity, which influences the tensile properties at room temperature.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
• /
• pp.187-190
• /
• 2001

This study is concerned with the hydrodispersive characteristics of granite in Changwon area. A single-well injection/recovery tracer test was conducted to determine longitudinal dispersivity of the granite, using sodium chloride tracer The dispersivity values obtained from the injection phase are 0.48 m (for between PW-1 and OW-3) and 0.72 m (for between PW-1 and OW-4). That obtained from the recovery phase is 0.68 m. The result of the tracer test indicates that the anisotropy and heterogeneity of the granite and the direction of flow.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.572-574
• /
• 1998

In this paper, we are proposed design of ATM networks to transfer for electric power system informations, proposed transport networks is partitioned management part and functional part, management part is partitioned edge network, core network, local network, authority network, functional part is partitioned core network, access network, edge area. It is based on laying and partitioning by ITU-T G.805, we also proposed ATM network requirements for Carrier Relay traffic acceptability in electric power system information.

• 한국재료학회지
• /
• 제28권10호
• /
• pp.539-543
• /
• 2018

We report the structural, morphological and magnetic properties of the $Ni_{70}Mn_{30}$ alloy prepared by Planetary Ball Mill method. Keeping the milling time constant for 30 h, the effect of different ball milling speeds on the synthesis and magnetic properties of the samples was thoroughly investigated. A remarkable variation in the morphology and average particle size was observed with the increase in milling speed. For the samples ball milled at 200 and 300 rpm, the average particle size and hence magnetization were decreased due to the increased lattice strain, distortion and surface effects which became prominent due to the increase in the thickness of the outer magnetically dead layer. For the samples ball milled at 400, 500 and 600 rpm however, the average particle size and hence magnetization were increased. This increased magnetization was attributed to the reduced surface area to volume ratio that ultimately led to the enhanced ferromagnetic interactions. The maximum saturation magnetization (75 emu/g at 1 T applied field) observed for the sample ball milled at 600 rpm and the low value of coercivity makes this material useful as soft magnetic material.

• 농촌계획
• /
• 제30권2호
• /
• pp.35-50
• /
• 2024

Dokmoe persimmon system in Changwon, designated as a Korea National Important Agricultural Heritage System is a unique agricultural heritage system, is a farming system carried out in the sloping semi-mountainous terrain of the low hills downstream of the Nagdong River. In this study, we analyzed the proposal submitted for registration by the orchard region GIAHS and analyzed the regional characteristics, agricultural characteristics, and threats to heritage conservation of Dokmoe persimmon system. Dokmoe persimmon system is located in a large city, so the threat of development was analyzed as a threat factor differentiated from other regions, and the development of the processing industry was analyzed as a common initiative for GIAHS in the orchard area. Based on this, we established a action plan for heritage conservation. The action plan consists of 4 main criteria, 6 plans, and 14 initiatives. Research on Dokmoe persimmon farming is now at the starting point, and this study will be able to contribute to registration of Dokmo persimmon system in GIAHS.

• 한국산학기술학회논문지
• /
• 제11권5호
• /
• pp.1814-1819
• /
• 2010

본 연구에서는 현재 OCR(과압밀비) 값 결정을 위하여 실용적으로 많이 활용되고 있는 경험적 방법인 정규화 콘팁저항치과 과압밀비의 관계상수법에 대하여 분석하였다. 이를 위하여 창원 북면 및 인천 서북면 지역의 연약점 토지반에 대하여 관계상수를 산정하고 고찰하였다. 연구결과, 관계상수 값은 창원북면의 경우 0.28~0.33, 인천 서북면의 경우 0.49~0.6으로, 해외의 기존 연구결과 보다 최대 90% 크게 비안전측으로 산정되어 향후 콘팁저항치와 과압밀비의 관계상수법 사용에 주의가 필요하다 하겠다.

• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.224-231
• /
• 2009

Techniques measuring Maxwell displacement current (MDC) and LB films surface measuring technique have been applied to the study of monolayers of polyamic acid containing azobenzene. MDCs was generated from monolayers on the water surface by monolayer compression and expansion. It was generated when the area per molecule was about $103{\AA}^2\;and\;78{\AA}^2$ just before the initial rise of the surface pressure during the 1st and 2nd mixed monolayer compressions cycle, respectively. It was the maximum of MDCs appeared at the molecular area just before the initial rise of surface pressure in compression cycles, and we have found that the increase of aggregations causes the noticeable increase of the surface roughness.

• 음성과학
• /
• 제13권1호
• /
• pp.109-116
• /
• 2006

In this paper, our study focuses on obtaining the differences of emotional speech in three different vocal tract sections. The vocal tract area was computed from the area function of the emotional speech. The total vocal tract was divided into 3 sections (vocal fold section, middle section and lip section) to acquire the differences in each vocal tract section of emotional speech. The experiment data include 6 emotional speeches from 3 males and 3 females. The 6 emotions consist of neutral, happiness, anger, sadness, fear and boredom. The measured difference is computed by the ratio through comparing each emotional speech with the normal speech. The experimental results present that there is not a remarkable difference at lip section, but the fear and sadness have a great change at the vocal fold part.